Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. > 1,000 W/kg Rad-Hard, High-Voltage PV Blanket at < $50/W IMM Cell Cost

    SBC: MARK O'NEILL, LLC            Topic: Z101

    The innovation is a new Stretched Lens Array (SLA) with a thinner, lighter, more robust Fresnel lens (with thin glass or polymer superstrate or embedded aluminum mesh). The new lens enables a blanket-level specific power > 1,000 W/kg, including lenses, PV cell circuit (including cells, encapsulation, high-voltage insulation, and heavy radiation shielding), and waste heat rejection radiator. The ne ...

    SBIR Phase II 2015 National Aeronautics and Space Administration
  2. "Fine grain Nb tube for SRF Cavities"

    SBC: Shear Form Inc            Topic: 65b

    Superconducting radio frequency (SRF) cavities used in charged particle linear accelerators, are currently fabricated by deep drawing and welding high RRR pure niobium sheet. The sheet typically has a non-uniform and poorly textured microstructure which leads to excessive thinning, unpredictable cavity shape, inconsistent "spring-back", and rough surfaces during cavity manufacture. These factors ...

    SBIR Phase I 2010 Department of Energy
  3. "HIGH PERFORMANCE SIGNAL PROCESSING"

    SBC: The Athena Group, Inc.            Topic: N/A

    THE DIGITAL SIGNAL PROCESSING (DSP) INDUSTRY SUPPLIES ESSENTIAL TOOLS AND TECHNOLOGY TO A HOST OF DEFENSE AND CIVILIAN END-USERS. DSP PRODUCTS ARE FOUND IN MANY FIELDS INCLUDING COMMUNICATIONS, AUDIO, VIDEO, AUTOMATION, GEOPHYSICAL, MEDICAL, AND RADAR/SONAR APPLICATIONS. HOWEVER, MANY CRITICALLY IMPORTANT PROBLEMS CANNOT BE SERVEDBY THIS INDUSTRY DUE TO CURRENT COMPUTATIONAL LIMITATIONS OFDSP HARD ...

    SBIR Phase I 1987 National Science Foundation
  4. "INVESTIGATION OF AN INEXPENIVE MOBILE BIOLOGICALLY ACTIVE AIR FILTRATION (BAF) UNIT FOR VOLATILE ORGANIC (VOC) COM- POUNDS"

    SBC: ERGON PHARMACEUTICALS, LLC            Topic: N/A

    INCREASED EMPHASIS ON THE PROBLEMS ASSOCIATED WITH ING UNDERGROUND STORAGE TANKS AND UNDERGROUND POLLUTION IN GENERAL HAS CREATED A NEED FOR TECHNOLOGY TO REDUCE OR ELIM-INATE THE ASSOCIATED CONTAMINATION. TO DATE, PACKAGE AIR GENERAL HAS CREATED A NEED FOR TECHNOLOGY TO REDUCE OR ELIMINATE THE ASSOCIATED CONTAMINATION. TO DATE, PACKAGE AIR STRIPPING UNITS SEEM TO HAVE RECEIVED THE BROADEST AC- CE ...

    SBIR Phase I 1987 Environmental Protection Agency
  5. .50 Caliber Light Weight Precision Ammunition

    SBC: PCP TACTICAL, LLC            Topic: SOCOM13006

    The A606 round is the current round of choice for sniper operations using the M107 or MK-15 weapons platforms.The A606 round was designed as an anti-materiel munitions, is not overly accurate (estimated 2 Minute of Angle), and is heavy (every two rounds weigh approximately a pound).(For example, the M107 weighs 36 pounds and 50 rounds of ammunition weigh 25 additional pounds for a total of 61 poun ...

    SBIR Phase II 2015 Department of DefenseSpecial Operations Command
  6. 28GHz-43GHz Nadir/Near-Nadir (~70-90 degrees wrt horizontal) Low Probability of Intercept Radio Frequency Direction Finding/GeoLocation Capability

    SBC: Mustang Technology Group, L.P.            Topic: N102118

    Mustang proposes an innovative antenna system that combines a planar phased array with 4 channel digital processing to produce direction finding in both azimuth and elevation.

    SBIR Phase I 2010 Department of DefenseNavy
  7. 3D Memristor Architectures for Software Defined Radio

    SBC: Privatran, LLC            Topic: N093222

    PrivaTran proposes the use of newly-developed manufacturing methods that convert materials commonly found in conventional integrated circuit (IC) manufacturing into memristor devices with increased packing density and an advanced, three-dimensional (3D) architecture. The memristor devices can be formed in the interconnect layers of a conventional IC so that the area available for underlying transi ...

    SBIR Phase I 2010 Department of DefenseNavy
  8. 3D Printed Clothing Ensembles for The Next Generation Navy Uniform

    SBC: Lynntech Inc.            Topic: N143128

    3D Printing provides unique opportunity to use digital models for production of physical objects. The advancement in 3D Printing led to utilization of the technology in various fields such as automotive, medical, and aerospace. With decline of the cost on 3D printers and expansion of the material selection, new application areas of this unique technology have been emerging. One of these emerging a ...

    SBIR Phase I 2015 Department of DefenseNavy
  9. 4-Quadrant GaN Based Battery Isolator Unit

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: A15084

    Current military vehicles use battery-isolating diodes to transfer current between two sets of battery banks, which are heavy, inefficient, and only allow current flow from the higher charged (higher voltage) battery to the other. This proposal details efforts to develop a bi-directional dc-dc converter for military vehicles to allow for smart control of current transfer between battery banks, as ...

    SBIR Phase I 2015 Department of DefenseArmy
  10. 90nm Low-Power Radiation-Hardened Metal-Programmable System-on-a-Chip

    SBC: Silicon Space Technology Corporation            Topic: AF083189

    Silicon Space Technology (SST) working with Texas Instruments (TI) proposes to demonstrate a 90nm low-power radiation-hardened (RH) metal-programmable system-on-a-chip (SOC) cell library. This will be accomplished by defining, designing, simulating and laying out a demonstration circuit that could eventually be turned into a commercial product. A base slice will be developed upon which the demonst ...

    SBIR Phase II 2010 Department of DefenseAir Force
US Flag An Official Website of the United States Government