List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. EVALUATION OF LOW CYCLE FATIGUE AND COATINGS WITH THE KET GAS PENETRANT INSPECTION PROCESS

    SBC: Qual-x, Inc.            Topic: N/A

    THE GAS PENETRANT PROCESS IS FUNDAMENTALLY ASSOCIATED WITH THE POTENTIAL ABILITY TO DETERMINE SURFACE ANOMALITIES BY THE VARIATIONS IN GAS ABSORPTION AT THESE ANOMALITIES. THIS PROGRAM IS FOCUSED ON TWO TURBINE ENGINE AREAS, LOW CYCLE FATIGUE AND TURBINE BLADE COATINGS, BOTH OF WHICH ARE INTIMATELY RELATED TO SURFACE BEHAVIOR THERMODYNAMICS. THE LOW CYCLE FATIGUE EFFORT IS DIRECTED TO DEVELOPING A ...

    SBIR Phase II 1985 Department of DefenseNavy
  2. COMPUTER-BASED DEVELOPMENT OF STEAM PROPULSION PLANT OPERATOR TRAINING (SPPOT) MATERIALS

    SBC: UES, Inc.            Topic: N/A

    THE TASK IS TO CONDUCT AN ECONOMIC AND TECHNICAL FEASIBILITY STUDY TO DETERMINE WHETHER THE HIGH LABOR-INTENSIVE EFFORTS TO PRODUCE SPPOT TRAINING MATERIAL CAN BE REDUCED THROUGH INNOVATIVE COMPUTER-BASED CAPABILITIES. THE STUDY WILL RESULT IN AN ECONOMIC FEASIBILITY REPORT AND A TECHNICAL FEASIBILITY REPORT BASED ON A JOB ANALYSIS OF THE SPPOT AUTHORING PROCESS, REVIEW OF SPPOT INPUT MATERIALS AN ...

    SBIR Phase II 1985 Department of DefenseNavy
  3. CERAMIC REINFORCEMENT FOR METAL MATRIX COMPOSITES DEVELOPMENT

    SBC: Material Concepts Inc            Topic: N/A

    RECENT DEVELOPMENTS IN THE AUTOMOTIVE INDUSTRY HAVE DEMONSTRATED THAT DISCONTINUOUS CERAMIC FIBER REINFORCEMENT CAN BE INCORPORATED IN A METAL MATRIX BY THE RELATIVELY SIMPLE AND INEXPENSIVE PROCESS OF SQUEEZE CASTING. THE OBJECTIVE OF THIS PROGRAM IS TO UPGRADE THIS TECHNOLOGY TO PRODUCE MATERIALS WHICH ARE FULLY, RATHER THAN SELECTIVELY, REINFORCED BY UP TO 20 VOLUME PERCENT DISCONTINUOUS FIBERS ...

    SBIR Phase II 1987 Department of DefenseNavy
  4. MONOLITHIC INTEGRATION OF OPTICAL STRUCTURES IN SUPERLATTICES BY MEV ION IMPLANTATION

    SBC: UES, Inc.            Topic: N/A

    INTEGRATED OPTICS IS THE ANALOG OF INTEGRATED ELECTRONICS IN SEMICONDUCTOR CIRCUITS USED FOR COMMUNICATIONS PURPOSES. INTEGRATED OPTICS HAS BEEN DEMONSTRATED WITH COMPONENTS THAT ARE COMBINED INTO SIMPLE HYBRID CIRCUITS, HOWEVER MONOLITHIC OPTICS HAS BEEN IMPEDED THROUGH DIFFICULTIES IN CONSTRUCTING COMPONENTS IN A SINGLE MATERIALS SYSTEM. GAAS AND ITS ALLOYS HOLD PROMISE AS CANDIDATES FOR MONOLIT ...

    SBIR Phase II 1987 Department of DefenseNavy
  5. Rapid Prototype Portable Combat and Launch System

    SBC: SYSTEMS ENGINEERING ASSOCIATES CORPORATION            Topic: N95053

    SEA CORP will leverage the innovative technologies developed under the prior SBIR Phase II project and extend the Research & Development (R&D) activities to the development of critical submarine combat system payload integration efforts. In the previous effort, components were successfully developed facilitating integration of Improved Submarine Launched Mobile Mine (ISLMM) capability aboard subma ...

    SBIR Phase II 2019 Department of DefenseNavy
  6. Shipboard Radar Cross Section/Radio Frequency (RCS/RF) Verification of Airborne Platform

    SBC: STAR DYNAMICS CORPORATION            Topic: N162118

    This Phase II proposal focuses on the Air-to-Air RCS/RF Verification Scenario as providing the highest return on investment from industrial commerce and for benefit to the DON for operational RCS/RF Verification. The overall objectives of the Phase II Base and Phase II Option programs is to exploit the extensive capabilities of STARs BlueMax G7 Extreme Instrumentation Radar while employing custom ...

    SBIR Phase II 2019 Department of DefenseNavy
  7. Solid State Radar Emitter Identification

    SBC: SYSTEMS ENGINEERING ASSOCIATES CORPORATION            Topic: N171043

    The ultimate goal of this SBIR effort is to deliver improvements to existing Fleet electronic warfare support systems by using statistical learning techniques to aid in the classification and unique identification of modern radar emitters. Since software-defined and solid-state emitters do not have the analog features traditionally used for classification, we will use more abstract, but well-defin ...

    SBIR Phase II 2019 Department of DefenseNavy
  8. Microstructure-Informed ICME for Optimizing Post-Build Heat Treatment (HT) and Hot Isostatic Pressing (HIP) Processes for Enhanced Fatigue Performance

    SBC: MRL MATERIALS RESOURCES LLC            Topic: N172106

    Optimization of the mechanical properties of additively manufactured metallic material often requires a combination of hot isostatic pressing and/or post-build heat treatments to achieve the desired combination of static, dynamic, and other properties. Microstructure evolution during such treatments has a dramatic effect on the final properties. The role of defects present from the additive manufa ...

    SBIR Phase II 2019 Department of DefenseNavy
  9. The Development and Evaluation of the GECKOS (Generating Employee Crowdsourced Knowledge for Organizational Solutions) System

    SBC: 361 Interactive, Llc            Topic: N172131

    We will develop GECKOS (Generating Employee Crowdsourced Knowledge for Organizational Solutions), a collaborative crowdsourcing system to enable large organizations to identify and resolve organizational inefficiencies using only their own personnel. We bring expertise from a range of areas (including cognitive science, systems engineering, information systems, interface design, and organizational ...

    SBIR Phase II 2019 Department of DefenseNavy
  10. High Throughput Testing of Additive Manufacturing

    SBC: MRL MATERIALS RESOURCES LLC            Topic: N18AT028

    Additive manufacturing is a disruptive new manufacturing paradigm that hold tremendous potential for creation of novel designs and introduction of novel new alloy systems. However, much of this potential remains unrealized due to a lack of robust material properties databases. Accurate calibration of materials models and robust part qualification and certification regimes both will require massive ...

    STTR Phase II 2019 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government