You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Innovative technologies for nondestructive determination of fracture toughness for pipeline steels in transportation infastructure

    SBC: Innerspec Technologies, Inc.            Topic: 180PH1

    In the inspection and quality assurance framework, coercimetry refers to non-destructive testing of mechanical properties based on measurements of the magnetic characteristics of a metal. This technology relies on the continuous and noticeable (100-400%) increase in the magnitude of the coercivity, while the metal passes from as-delivered to its final state. As both magnetic and mechanical propert ...

    SBIR Phase II 2019 Department of Transportation
  2. Synoptic Approach to Harmonize Discrete Data Streams in Application Development

    SBC: It Works Inc            Topic: 180NH1

    Research conducted in Phase I identified a range of data sources providing vehicle related information to consumers shopping around or interested in knowing more about vehicles. Majority of the commercial data sources focused on vehicle features, new/used/CPO pricing, and vehicles listings. Such data sources lacked safety as their central focus, which is a concern for U.S. Department of Transporta ...

    SBIR Phase II 2019 Department of Transportation
  3. Fuel Cell Phase I Qualification and UH-1Y Crashworthy Prototypes

    SBC: Response Technologies, LLC            Topic: DLA182001

    There are over 123 UH-1Y aircraft in service today, each equipped with five internal fuel cells, with an average cost of $15k per fuel cell. The current supply chain for UH-1Y fuel cells is not able to meet delivery nor quality requirements, which has resulted in a significant force readiness issue. With this SBIR Phase II proposal, Response Technologies (RT) aims to: 1) “Phase I Qualify” a co ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  4. Smart Baseplate for Additive Manufacturing

    SBC: Luna Innovations Incorporated            Topic: DLA18A001

    Additive manufacturing (AM) has rapidly evolved into a valuable technique for making parts which, at times, cannot be fabricated through conventional machining methods, or for fabrication of small quantities of complex parts. One challenge in the area of AM is the lack of real-time feedback on the fabrication process and the quality of the part being made. This is especially critical given the rel ...

    STTR Phase II 2019 Department of DefenseDefense Logistics Agency
  5. NanoSonic Sourcing of NSN 8010-01-266-6576 Epoxy Primer Coating

    SBC: Nanosonic Inc.            Topic: DLA181005

    During the Phase I SBIR effort, NanoSonic designed, tested, and empirically optimized a two-part epoxy polyamide primer that will meet the performance requirements and distribution goals for NSN: 8010-01-266-6576 Part Name: Epoxy Primer Coating DLA Supply Chain: C&E Weapon System: B-2 Part Description: MILSPEC Part Number M85582-2-C2-0001P. To meet this challenge, NanoSonic implemented a rigorous ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  6. Rotorcraft Fuel Bladder Weight and Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA182001

    Response Technologies will attempt to build H-60 fuel cell prototypes and qualify to a portion of MIL-DTL-27422F’s Phase II performance testing criteria [Class B – Semi rigid or self-supporting fuel construction, Type I – Self-sealing, and Protection Level C – Full self-sealing against 50 caliber and partial self-sealing against 14.5 mm] . Response Technologies uses an additive manufacturi ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  7. Reliable Production of Nuclear Enterprise Industrial Rubber Gloves for DLA Troop Support

    SBC: Nanosonic Inc.            Topic: DLA181005

    The goal of the proposed Phase II DLA SBIR program is to demonstrate the reliable production of Nuclear Enterprise Rubber Industrial Gloves to become an approved source for unrestricted purchases from DLA Troop Support. NanoSonic's robotic electrostatic self-assembly (ESA) process is amenable to the repeatable production of high quality, pit and void-free rubber gloves due to the inherent control ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  8. Seamless Flexible Fuel Tanks- 65% TOC Reduction

    SBC: Response Technologies, LLC            Topic: DLA152001

    The DoD uses flexible fuel bladders in multiple air, ground, and sea vehicles because they: 1) easily fit into almost any space, 2) are corrosion resistant, and can often be self-sealing and explosion resistant, 3) allow for customized placement of fittings and connection points, and 4) these flexible tanks can collapse as they empty, thereby reducing the need for venting and minimizing sloshing a ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency
  9. Affordable 3-Dimensional Ceramic Discrete Parts via Additive PDC Technology

    SBC: Nanosonic Inc.            Topic: DLA152001

    NanoSonic, a 30,000 square foot specialty materials production facility, in the Wheatland Eco-Park, has developed an environmentally friendly, advanced manufacturing process to fulfill the Defense Logistics Agencys (DLA) need for affordable discrete-parts with fine features for legacy and future fielded weapon systems.We have developed a technically advanced and innovative manufacturing method to ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency
  10. Advanced Battery Manufacturing Technologies

    SBC: ADA Technologies, Inc.            Topic: DLA142001

    ADA Technologies, Inc. (ADA) in partnership with Laser Marks, a laser systems integrator, has designed, developed (Phase I) and will fabricate a low-cost, automated, high-speed/high-throughput Li-ion electrode cutter capable of producing high quality electrodes in an additive manufacturing environment. Utilizing the latest in laser technology and scanning systems coupled with innovative design and ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government