You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Rapid Repair of Corroded Fastener Holes
SBC: VRC Metal Systems, LLC Topic: N192085x
SBIR Phase I 2019 Department of DefenseNavy -
Temporary Crack Repairs for Aluminum Structures on Surface Ships
SBC: VRC Metal Systems, LLC Topic: N151052The following tasks are to be executed by the contractor in support of NAVAIR Materials Engineering Division AIR 4.3.4 and NAVSEA 04X3 Tactical Innovation Implementation Laboratory (TIIL). These tasks are in support of evaluating high pressure cold spray technology for the repair of A356 and E357 cast components, allowing the dimensional restoration and return to service of the components. The tas ...
SBIR Phase II 2019 Department of DefenseNavy -
Open Call for Science and Technology Created by Early-Stage (e.g. University) Teams
SBC: H. F. WEBSTER ENGINEERING SERVICES, INC. Topic: AF19BT001There are two main objectives that this proposal addresses. The first is to develop an oil additive that reduces friction and is thermally conductive and designed to increase engine efficiency and equipment lifecycles. This will be obtained through further material production and testing. Once the desired thermal conductivity and friction coefficient is achieved, the oil additive will be tested at ...
STTR Phase I 2019 Department of DefenseAir Force -
Nanoparticle-Enhanced Plasma-Electrolytic-Oxidation of Al and Ti Alloys for Hard Chrome Replacement
SBC: NANOCOATINGS INC Topic: AF191104NanoCoatings, Inc. (NCI) and South Dakota School of Mines & Technology (SDSMT) propose to demonstrate a unique high-voltage anodize process, Plasma Electrolytic Oxidation (PEO), to produce crystalline-oxide conversion surfaces on Al-alloy (e.g., 2024 Al) and Ti-alloy surfaces that provide comparable or higher corrosion and wear-resistance over hard Chromium (Cr) plating. The intended application i ...
SBIR Phase I 2019 Department of DefenseAir Force -
Friction-Stir-Additive and Plasma-Electrolytic-Oxidation Coating Technologies for Penetration Resistance
SBC: NANOCOATINGS INC Topic: A18BT021The U.S. Army requires additive manufacturing (AM) techniques that can repair and retrofit structures to improve ballistic survivability. Current AM processes have low deposition rates, are constrained by environmental chambers, and are not readily scalable for large-size production. The goal of this STTR topic is to develop a rapid-deposition ballistic-resistant-coating for metal panels. NanoCoat ...
STTR Phase I 2019 Department of DefenseArmy -
Large Scale Nano-Crystalline Coatings For Penetration Resistance
SBC: VRC Metal Systems, LLC Topic: A18BT021The US Army needs an effective method to augment and repair existing armor technologies. Nanoscale metal matrix composite (MMC) materials provide a promising combination of properties and could provide an ideal armor coating for increasing threat severity. Cold spray is a low temperature, solid state method of additive manufacturing that has shown promise for the deposition of hard, MMC materials ...
STTR Phase I 2019 Department of DefenseArmy -
SBIR Phase I: A Novel Method for Atmospheric Correction of Earth Observation Satellite Data
SBC: Advanced Remote Sensing, Inc. Topic: CTThe broader impact/commercial potential of this Small Business Innovation Research (SBIR) project is to provide software service to correct Earth observation satellite (EOS) data to at-ground reflectance. EOS must look through the Earth?s atmosphere that induces systematic error in measuring the actual reflectance of ground targets through scatter and attenuation of light. Atmospherically-induced ...
SBIR Phase I 2019 National Science Foundation -
SanFlow: A Therapeutic Agent for Use in the Field for Traumatic Brain Injury
SBC: ANTIRADICAL THERAPEUTICS LLC Topic: DHA17011An ideal therapeutic for traumatic brain injury (TBI) accompanied by hemorrhagic shock (HS) should serve both as a resuscitation fluid to restore perfusion pressure while directly protecting the brain from secondary injury. Previous work in mice demonstra
SBIR Phase II 2019 Department of DefenseDefense Health Agency -
Open Call for Innovative Defense-Related Dual-Purpose Technologies/Solutions with a Clear Air Force Stakeholder Need
SBC: SecureMarking, Inc. Topic: AF183005Reconfigurable authentication unit for reading security codes printed onto parts. Our technology uses upconverting nanoparticles (UCNPs) to print durable security codes onto authentic products. We have developed a working reading apparatus that can scan codes printed onto objects with the dimensions of a credit card. This proposal will support development of a reader apparatus that is versatile en ...
SBIR Phase I 2019 Department of DefenseAir Force -
SBIR Phase I:Combining Time Compressed Synthetic Pulses and Frequency Scalable Antennae to Optimize UWB Sensor Dynamic Range
SBC: REALTRONICS Topic: N/AThis Small Business Innovation Research (SBIR) Phase I project proposes to capitalize on evolving concepts for sensor optimization that will facilitate the detection of human targets through caves, hillsides, buildings, foliage, fog, and other opaque materials. This technology will have broad application in homeland security, airport security, hostile police action, high school and other hostage e ...
SBIR Phase I 2003 National Science Foundation