You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. POLYIMIDE QUARTZ MULTILAYER BOARD

    SBC: A.i. Technology Inc            Topic: N/A

    A POLYIMIDE BASED POLYMER ALLOY IS PROPOSED TO BE USED AS THE MATRIX FOR A QUARTZ FILLED MULTILAYER CIRCUIT BOARD. POLYIMIDE WHICH HAS THERMAL EXPANSION COEFFICIENT (TEC) OF 30 PPM/DEG C IS SUBSTANTIATLY LOWER THAN THAT OF EPOXY (50-60 PPM/ DEG C). THE POLYMER ALLOY WHICH CONSISTS OF RIGID-RODLIKE MOLECULES, HOWEVER, WILL HAVE TEC AS LOW AS 10-20 PPM/DEG C. QUARTZ FIBER FILLED IN DIFFERENT GEOMETR ...

    SBIR Phase I 1987 Department of DefenseNavy
  2. MANUFACTURING COST ANALYSIS- GALLIUM ARSENIDE MMIC FOR PHASE ARRAY RADAR TRANSMIT/RECEIVER MODULES

    SBC: Anadigics Inc            Topic: N/A

    MMIC YIELD IS THE SIGNIFICANT FACTOR IN DETERMINING BOTH CHIP COST AND LEVEL OF INTEGRATION. IN ORDER TO MAXIMIZE YIELD, IT IS NECESSARY TO ESTABLISH A CONSISTENT, REPRODUCIBLE PROCESS CONTROL, COUPLED WITH CREATIVE CIRCUIT DESIGN TECHNIQUES USED TO CREATE SHIP SETS WHICH ARE TOLERANT TO PROCESS VARIATIONS. A LARGE PROPORTION OF THE FINAL COST FOR THE END PRODUCT IS RELATED TO THE ASSEMBLY AND FIN ...

    SBIR Phase II 1987 Department of DefenseNavy
  3. LOW COST POINTING AND TRACKING SYSTEM FOR OPTICAL COMMUNICATION

    SBC: A-TECH CORPORATION            Topic: N/A

    OPTICAL COMMUNICATION LINKS HAVE SEVERAL ADVANTAGES FOR SHIP-TO-SHIP APPLICATIONS. KEY FEATURES WHICH MAKE OPTICAL COMMUNICATION ATTRACTIVE INCLUDE HIGH DATA BANDWIDTH AND EASE OF PROTECTION FROM INTERCEPTION. THE PERFORMANCE REQUIREMENTS FOR POINTING AND TRACKING SYSTEMS FOR OPTICAL COMMUNICATION LINKS ARE DEMANDING WHEN EITHER TRANSMITTER OR RECEIVER IS ON A MOVING VEHICLE. CONSEQUENTLY, SUCH SY ...

    SBIR Phase I 1987 Department of DefenseNavy
  4. PRECISION OPTICAL TRACKING FOR SHORT RANGE ENGAGEMENT (POTSHOTE)

    SBC: A-TECH CORPORATION            Topic: N/A

    THE INTENT OF THIS WORK IS TO DEVELOP AN ADVANCED ESTIMATION ALGORITHM FOR MANEUVERING TARGET STATE ESTIMATION AND PREDICTION. THE ALGORITHM WILL BE USED FOR FIRE CONTROL IN THE LOCAL AREA DEFENSE ROLE. THE TARGET STATE ESTIMATOR USES TWO DIMENSIONAL INFRA-RED ELECTRO-OPTICAL IMAGERY AND RADAR DATA TO COMPUTE CURRENT AND PREDICT FUTURE TARGET STATES. INCLUDED IN THIS ANALYSIS WILL BE ALGORITHMS FO ...

    SBIR Phase I 1987 Department of DefenseNavy
  5. DETERMINATION OF THE ULTIMATE STRENGTH OF A COMPOSITE MATERIAL BY CONSIDERATION OF CRITICAL MANUFACTURING FLAWS

    SBC: Castle Point Research Technolo            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseNavy
  6. THREE-DIMENSIONAL TRANSIENT FLOW PREDICTION

    SBC: Ecodynamics Research Associate            Topic: N/A

    THIS PROPOSAL IS FOR A DESIGN STUDY FOR THE DEVELOPMENT OF A COMPUTER CODE FOR THREE DIMENSIONAL TRANSIENT FLOW PREDICTION. THE COMPUTER CODE WILL BE CAPABLE OF ACCURATELY PREDICTING INCOMPRESSIBLE TRANSIENT TURBULENT FLOW FIELDS USING THE FINITE VOLUME TECHNIQUE. THE CODE WILL BE APPLICABLE TO THREE DIMENSIONAL INTERNAL AND EXTERNAL FLOW PROBLEMS AND WILL BE IN THE FORM OF GENERALIZED CURVILINEAR ...

    SBIR Phase I 1987 Department of DefenseNavy
  7. THREE-DIMENSIONAL NON-LINEAR PHASED ARRAY CONCEPT FEASIBILITY STUDY

    SBC: Electro Magnetic            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseNavy
  8. MULTIPOINT TARGET RADIO FREQUENCY AUGMENTATION

    SBC: ELECTRO-RADIATION, INC.            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseNavy
  9. A SIMPLE SAFETY ARMING SWITCH

    SBC: Enfitek Inc            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseNavy
  10. TOUGH HIGH MODULUS EPOXY CASTING MATERIALS

    SBC: Gumbs Associates, Inc.            Topic: N/A

    THE OVERALL OBJECTIVE OF THIS PROJECT IS TO DEMONSTRATE THE FEASIBILITY OF PREPARING LOW VISCOSITY, ROOM TEMPERATURE CURABLE, TOUGH, HIGH MODULUS EPOXY CASTING MATERIALS USING POLY(ARYL ETHER KETONES) AND POLY(ARYL ETHER SULFONE KETONE) COPOLYMERS AS IMPACT MODIFIERS. TOUGH, HIGH MODULUS CASTING MATERIALS ARE NOT AVAILABLE. AS THE MODULUS INCREASES, THE BRITTLENESS OF THE CONVENTIONAL PLASTICS ALS ...

    SBIR Phase II 1987 Department of DefenseNavy
US Flag An Official Website of the United States Government