You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Seat/Bolster/Other

    SBC: ACTIVE SHOCK, INC.            Topic: N/A

    A shock mitigating suspended seat, which places the Special Forces Operator in an optimal ergonomic position, will be developed for use in the NSW 11M RIB. It will feature a semi-actively controlled shock absorber to optimize the suspension for a broadrange of operator weights and sea states. In the Phase I effort, a conceptual design and architecture for both control hardware and software was d ...

    SBIR Phase II 2003 Department of DefenseSpecial Operations Command
  2. Emerging Weapons Technology Evaluation Model

    SBC: APPLIED SCIENCES LABORATORY, INC.            Topic: N/A

    Accelerated development of directed energy technologies has presented new problems to mission planners and weapon operators regarding the capabilities, lethality and performance of weapon systems. The Emerging Weapons Technology Evaluation Model willaddress these shortcomings by providing users of varying technical expertise 1) the ability to model a variety of weapons in various mission scenario ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
  3. SOF Micro Lab

    SBC: F&H APPLIED SCIENCE ASSOC., INC.            Topic: N/A

    The overall goal of this program is to build a compact, lightweight, portable laboratory kit that can be used to analyze chemistries, cell counts, parasites, bacteria, and other pathogens in blood, urine, and body fluids. Our proposed Portable Micro-Lab(PML) kit will be composed of two sub-systems:1) Environmentally stable microdot test strips smaller than a stick of chewing gum and containing th ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
  4. Development of Frequency Hopper/DSSS Detection Algorithms

    SBC: Herrick Technology Laboratories Inc.            Topic: N/A

    The development of a hardware module for installation in DRT Receiver hardware to allow for the real-time detection and identification of FH and DSSS spread spectrum signals using the FDDM algorithm developed under Phase I.

    SBIR Phase II 2003 Department of DefenseSpecial Operations Command
  5. Composite Stuff-Proof Windshield and Lightweight Pilothouse Assembly

    SBC: PACKER TECHNOLOGIES INTERNATIONAL (FORME            Topic: N/A

    The Phase II effort builds on Phase I. Phase II starts with an integrated product and process design and engineering analysis of the baseline structure described in the Phase I report and variants that may reduce cost and risk. The emphasis is on use ofnonlinear FEA with continuum analysis to handle stiffeners, window frames, and connectors. After review and approval by SOCOM, the design is fab ...

    SBIR Phase II 2003 Department of DefenseSpecial Operations Command
  6. Battery Modulation for Communications Equipment

    SBC: Policell Technolpgies, Inc.            Topic: N/A

    Policell Technologies Inc. proposes 6 month research effort to demonstrate the feasibility of replacing the lithium BA-5590 with a rechargeable battery. It is proposed to design and develop basic pouch lithium-ion cells that are suitable for assembly ofBA-5590 battery and deliver some basic pouch cells to SOCOM by the end of the Phase I program. The battery system will be based on Policell Technol ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
  7. Scalable 500W Fieldable TPV Power Supply

    SBC: STRUCTURED MATERIALS INDUSTRIES, INC.            Topic: N/A

    We propose to develop a 500W thermophotovoltaic based power supply by combining and optimizing our highest efficiency 2.4 micron cutoff thermophotovoltaic cells with our partners developed burner that uses conventional fuels. In Phase I, we will completeengineering design based upon existing and projected capabilities. In Phase II we will build, field and test a manufacturable prototype. In Phase ...

    SBIR Phase I 2003 Department of DefenseOffice of the Secretary of Defense
  8. Diode Laser-Based Ketosis Sensor

    SBC: SOUTHWEST SCIENCES INC            Topic: N/A

    The nutritional health of field personnel deployed for extended periods is a long-standing problem critical to military troop performance and readiness. The combination of extraordinary physical stresses and the limited provisions carried by militaryfield personnel result in large caloric imbalances. Personnel may experience: loss of strength and decreased endurance; loss of motivation and decr ...

    SBIR Phase II 2003 Department of DefenseOffice of the Secretary of Defense
  9. Advanced Lightweight NBC Protective Clothing

    SBC: UTILITY DEVELOPMENT CORP            Topic: N/A

    N/A

    SBIR Phase II 2003 Department of DefenseSpecial Operations Command
  10. Fast Curing Modular Composite Patch System for Field Applications

    SBC: CONTINUUM DYNAMICS INC            Topic: SOCOM07002

    SOCOM requires a method to field repair multiple materials as well as to mount armor and related hardware for a variety of tactical purposes with a composite material. To address this need, we propose application of a “Modular UV Patch” (MUVP) system that incorporates ultraviolet curing resin systems and an innovative technique for delivering the UV light through optically lossy fibers that f ...

    SBIR Phase I 2007 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government