Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. MANUFACTURING COST ANALYSIS- GALLIUM ARSENIDE MMIC FOR PHASE ARRAY RADAR TRANSMIT/RECEIVER MODULES

    SBC: Anadigics Inc            Topic: N/A

    MMIC YIELD IS THE SIGNIFICANT FACTOR IN DETERMINING BOTH CHIP COST AND LEVEL OF INTEGRATION. IN ORDER TO MAXIMIZE YIELD, IT IS NECESSARY TO ESTABLISH A CONSISTENT, REPRODUCIBLE PROCESS CONTROL, COUPLED WITH CREATIVE CIRCUIT DESIGN TECHNIQUES USED TO CREATE SHIP SETS WHICH ARE TOLERANT TO PROCESS VARIATIONS. A LARGE PROPORTION OF THE FINAL COST FOR THE END PRODUCT IS RELATED TO THE ASSEMBLY AND FIN ...

    SBIR Phase II 1987 Department of DefenseNavy
  2. TOUGH HIGH MODULUS EPOXY CASTING MATERIALS

    SBC: Gumbs Associates, Inc.            Topic: N/A

    THE OVERALL OBJECTIVE OF THIS PROJECT IS TO DEMONSTRATE THE FEASIBILITY OF PREPARING LOW VISCOSITY, ROOM TEMPERATURE CURABLE, TOUGH, HIGH MODULUS EPOXY CASTING MATERIALS USING POLY(ARYL ETHER KETONES) AND POLY(ARYL ETHER SULFONE KETONE) COPOLYMERS AS IMPACT MODIFIERS. TOUGH, HIGH MODULUS CASTING MATERIALS ARE NOT AVAILABLE. AS THE MODULUS INCREASES, THE BRITTLENESS OF THE CONVENTIONAL PLASTICS ALS ...

    SBIR Phase II 1987 Department of DefenseNavy
  3. DIRECT SURFACE MOUNT IC PACKAGE FOR PCB'S

    SBC: International Micro Industries            Topic: N/A

    THIS EFFORT WILL FOCUS ON LOWERING COST AND IMPROVING PER- FORMANCE BY ELIMINATING CERAMIC AND PLASTIC PACKAGES PRES- USED IN SURFACE MOUNTING SEMICONDUCTOR CHIPS. THE CHIP WILL BE MOUNTED DIRECTLY TO A PREPARED FOOTPRINT ON THE PRINTED CIRCUIT BOARD (PCB) UTILIZING ADVANCED TAPE AUTO- MATED BONDING (TAB) AND NEW CHIP OVERCOATING MATERIALS. A COMMERCIALLY AVAILBLE VLSI SHIP WITH MORE THAN 60 I/O'S ...

    SBIR Phase II 1987 Department of DefenseNavy
  4. MATRIX ALLOY DESIGN FOR TOUGHENING DISCONTINUOUSLY REINFORCED COMPOSITES

    SBC: Materials Reliability Inc            Topic: N/A

    CURRENT ALUMINUM MATRIX COMPOSITES WHICH USE ALLOYS REQUIRING SOLUTION HEAT TREATING, QUNEHCING, AND ELEVATED TEMPERATURE AGING SUFFER FROM POOR TOUGHNESS. IT IS EXPECTED THE TOUGHNESS OF ALUMINUM MATRIX COMPOSITES CAN BE SIGNIFICANTLY INCREASED THROUGH THE USE OF 5000 SERIES ALLOYS WHICH HAVE HIGH WORK HARDENING RATES AND GOOD DUCTILITY. ANY LOSS IN COMPOSITE STRENGTH CAN BE COMPENSATED BY ADJUST ...

    SBIR Phase II 1987 Department of DefenseNavy
  5. A CONFIGURABLE AUTOMATED LIBRARIAN FOR COMPUTER SOFTWARE SOURCE CODE

    SBC: Modular Software Systems            Topic: N/A

    COORDINATION OF THE SHARING OF SOURCE CODE IN MEDIUMETO LARGE-SCALE SOFTWARE DEVELOPMENT PROJECTS POSES A DIFFICULT PROBLEM IN THE ABSENCE OF A SOURCE CODE LIBRARIAN SYSTEM. UNFORTUNATELY, SYSTEMS OF THIS TYPE, WHILE POWERFUL AND FLEXIBLE, GENERALLY REQUIRE A LEVEL OF EXPERTISE AND COMMITMENT NOT COMMONLY FOUND IN THE APPLICATIONS CODE DEVELOPER. IN AN ATTEMPT TO ADDRESS THIS PROBLEM, THIS PROPOSA ...

    SBIR Phase II 1987 Department of DefenseNavy
  6. FAST SHORTLINE TRACING FOR SURVIVABILITY/VULNERABILITY CODES

    SBC: Physics Mathematics &            Topic: N/A

    ALL SURVIVABILITY/VULNERABILITY COMPUTER CODES, INCLUDING THOSE FOR PROJECTILES, LASERS, AND RADIATION EFFECTS, INVOLVE TRACING SAMPLE PATHS (CALLED SHOTLINES) THROUGH COMPUTERIZED GEOMETRY MODELS. FOR COMPLEX EQUIPMENT, HUNDREDS OF THOUSANDS OF SHOTLINES ARE ANALYZED TO DETERMINE ITS VULNERABILITY TO VARIOUS WEAPON EFFECTS. THUS, THE SHOTLINE-TRACING COMPUTER CODES STRONGLY INFLUENCE THE ACCURACY ...

    SBIR Phase II 1987 Department of DefenseNavy
  7. COMPACT HIGH POWER LASERS FOR MODERN DEFENSE APPLICATIONS

    SBC: Advec Corp.            Topic: N/A

    THE DEVELOPMENT OF COMPACT, HIGH ENERGY DENSITY, HIGH POWER (AND POTENTIALLY C.W.) LASER SYSTEMS CAPABLE OF PROPAGATING THROUGH BOTH AIR AND WATER COULD PAVE THE WAY FOR NEXT GENERATION TACTICAL NAVAL SYSTEMS. APPLICATIONS IN OTHER DEFENSE AREAS AS WELL AS A HOST OF COMMERCIAL APPLICATIONS ARE ALSO POSSIBLE WITH THESE TYPES OF SYSTEMS. WE PROPOSE TO PROVIDE A DETAILED PLAN AND DESIGN OF SPECIFIC E ...

    SBIR Phase II 1989 Department of DefenseNavy
  8. VAPOR COATING OF BORON FUEL PARTICLES BY MAGNESIUM

    SBC: Aerochem Research            Topic: N/A

    THE OBJECTIVE OF THE PHASE I RESEARCH IS TO DEMONSTRATE THE FEASIBILITY OF VAPOR DEPOSITING A THIN COATING OF MAGNESIUM ON BORON PARTICLES TO PROTECT THEM FROM LOW TEMPERATURE OXIDATION AND AID THEIR IGNITION IN BORON-CONTAINING FUELS. THE FEASIBILITY WILL BE DEMONSTRATED IN A LABORATORY SCALE DIFFUSION-FLOW APPARATUS. COLLECTED, COATED BORON PARTICLES WILL BE EXAMINED WITH OPTICAL AND ELECTRON MI ...

    SBIR Phase II 1989 Department of DefenseNavy
  9. WARFARE SYSTEMS ARCHITECTURE

    SBC: American Power Jet Company            Topic: N/A

    THE APPLICATION OF MODERN COMPUTER ASSISTED SYSTEMS ENGINEERING (CASE) TOOLS IS PROPOSED TO ADDRESS THE DEVELOPMENT OF A NAVY LOGISTICS WARFARE SYSTEMS ARCHITECTURE AND ENGINEERING (WSA&E) CONCEPT. THIS TECHNIQUE HAS BEEN APPLIED TO SIMILARLY COMPLEX AND INTERRELATED LARGE-SCALE ENTERPRISES. APJ HAS DEMONSTRATED THE VIABILITY OF STRUCTURED SYSTEMS ANALYSIS UTILIZING CASE IN THE PROCESS OF ORGANIZI ...

    SBIR Phase II 1989 Department of DefenseNavy
  10. MULTIPOINT TARGET RADIO FREQUENCY AUGMENTATION

    SBC: ELECTRO-RADIATION, INC.            Topic: N/A

    THE PROGRAM EXAMINES THE MAJOR DESIGN REQUIREMENTS AND DESIGN DECISIONS ASSOCIATED WITH THE DEVELOPMENT OF AN ACTIVE DUAL SOURCE MULTIPOINT TARGET RF AUGMENTOR FOR RADAR SIGNATURE ENHANCEMENT OF SMALL MISSILE-TYPE TEST TARGETS. THE EFFORT CONDUCTS THE TARGET AND INSTALLATION RESEARCH; DEFINES THE OPERATIONAL OBJECTIVES; DEFINES LARGE TARGET RF SIGNATURES; SELECTS AN AUGMENTATION SYSTEM DESIGN APPR ...

    SBIR Phase II 1989 Department of DefenseNavy
US Flag An Official Website of the United States Government