You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Pocket-Stove

    SBC: Charged Injection Corporation            Topic: N/A

    A playing-card deck sized, logistics-fuel Pocket Stove design employing a compact, low power electrostaticatomizer is proposed. Micron sized logistic fuel sprays are generated at one bar operating pressure ( 15 psi ) by a Spray Triode electrostatic atomized. A Single coupled to a compact DC-DC converter provides the low milli-watt level electrical power necessary for over 1000 hours ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  2. Crosslinked Fire-Resistant Poly (ethylene terephthalate) for Batting Insulation

    SBC: MATERIAL INNOVATIONS, INCORPORATED            Topic: N/A

    There is a need for an inexpensive, lighter, effective nonhalogenated, and environmentally friendly fire-resistant (FR) textile material for batting insulation and shell fabrics to be used in ground soldiers combat uniforms. The current FR textile materials are very expensive, ranging in price from $13/pound (Nomex TM) TO $70/pound (polybenzimidazole). Less expensive FR textile material either c ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  3. A Compact Self-Cleaning Filtration System with Periodic Automatic Back-Flushing for Pretreatment of RO Filtration

    SBC: MECHANICAL SOLUTIONS INC            Topic: N/A

    The objective of this proposal is to demonstrate the feasibility of an innovative design that combines centrifugal separation, cross-flow filtration (CFF), Dean flow surface cleaning and back-flush techniques into an effective micro-filtration unit. The centrifugal separation is effective in separating particles that have higher specific gravity that the feed fluid down to 20 microns. CFF is espe ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  4. SMALL SIZE, MULTI-FREQUENCY, MULTIBEAM PHASED ARRAY ANTENNA SYSTEM

    SBC: PRINCETON MICROWAVE TECHNOLOGY INC            Topic: N/A

    Satellite communications, Airborne radar, EW, and Communications systems differ significantly in their antenna requirements. Not only do the various systems differ in their primary functions, but the many variations within one system will affect antenna requirements. For example, an airborne radar system may be configured functionally as a tracking, search and track, altimeter, navigation, groun ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  5. Breathable Release Coatings for Ceramic Tooling

    SBC: UTILITY DEVELOPMENT CORP            Topic: N/A

    The main objective of this Phase I program will be to develop a release coating for use with ceramic tooling that will be capable of withstanding cure temperatures in excess of 700F and will have high solvent vapor permeability. The main approach will be to formulate a high temperature film forming silicone resin system by investigating improvements of silicone resins that will be modified with p ...

    SBIR Phase II 1998 Department of DefenseOffice of the Secretary of Defense
  6. Dental Restorative Materials with Improved Long-Term Storage Stability, Processability and Performance

    SBC: UTILITY DEVELOPMENT CORP            Topic: N/A

    Our main objective will be to investigate and develop, test, and deploy polymeric based dental restorative materials that are suitable for minimum 5 years storage, and are temperature and humidity insensitive for use under deployed conditions. During this Phase I program, UDC will perform the feasibility determination and development of temperature and humidity insensitive dental restorative comp ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  7. Emerging Weapons Technology Evaluation Model

    SBC: APPLIED SCIENCES LABORATORY, INC.            Topic: N/A

    Accelerated development of directed energy technologies has presented new problems to mission planners and weapon operators regarding the capabilities, lethality and performance of weapon systems. The Emerging Weapons Technology Evaluation Model willaddress these shortcomings by providing users of varying technical expertise 1) the ability to model a variety of weapons in various mission scenario ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
  8. SOF Micro Lab

    SBC: F&H APPLIED SCIENCE ASSOC., INC.            Topic: N/A

    The overall goal of this program is to build a compact, lightweight, portable laboratory kit that can be used to analyze chemistries, cell counts, parasites, bacteria, and other pathogens in blood, urine, and body fluids. Our proposed Portable Micro-Lab(PML) kit will be composed of two sub-systems:1) Environmentally stable microdot test strips smaller than a stick of chewing gum and containing th ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
  9. Battery Modulation for Communications Equipment

    SBC: Policell Technolpgies, Inc.            Topic: N/A

    Policell Technologies Inc. proposes 6 month research effort to demonstrate the feasibility of replacing the lithium BA-5590 with a rechargeable battery. It is proposed to design and develop basic pouch lithium-ion cells that are suitable for assembly ofBA-5590 battery and deliver some basic pouch cells to SOCOM by the end of the Phase I program. The battery system will be based on Policell Technol ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
  10. Scalable 500W Fieldable TPV Power Supply

    SBC: STRUCTURED MATERIALS INDUSTRIES, INC.            Topic: N/A

    We propose to develop a 500W thermophotovoltaic based power supply by combining and optimizing our highest efficiency 2.4 micron cutoff thermophotovoltaic cells with our partners developed burner that uses conventional fuels. In Phase I, we will completeengineering design based upon existing and projected capabilities. In Phase II we will build, field and test a manufacturable prototype. In Phase ...

    SBIR Phase I 2003 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government