You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. HealthTrakT: Technology Enhanced Human Interface to the Computerized Patient Record

    SBC: ACUSOFT, INC.            Topic: N/A

    After Action Review is an essential part of both the training and actual combat environment. Sophisticated AAR Tools, such as PowerSTRIPES, have been developed for use in the modeling and simulation environment. These tools allow users to collect thedata, transform the data as useful information, and present this information in multi-media formats as objective evidence of performance. These too ...

    SBIR Phase I 2001 Department of DefenseOffice of the Secretary of Defense
  2. Controlled Rigidization Technology for Inflatable Spacecraft

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Large space-deployed structures such as synthetic aperture radars, radiometers, and solar arrays are receiving a great deal of interest by NASA in the Earth Sciences program. These large structures by necessity must be ultra-lightweight and low stored volume. Inflatable or self-deployable approaches that become rigid after they reach the correct shape appear to be a promising approach for fabricat ...

    SBIR Phase I 2001 National Aeronautics and Space Administration
  3. Self-Deploying Foam Antenna Structures

    SBC: Adherent Technologies, Inc.            Topic: N/A

    There is an increasing need for large, reliable, and cost-effective inflatable space antennas for communications applications. This Phase I program will focus on the design and development of open-celled foams as structural elements in self-deploying antenna systems. Foams offer the following significant advantages over conventional materials for these applications: open cellular structure allowin ...

    STTR Phase I 2001 National Aeronautics and Space Administration
  4. Electron Beam Processable Polyimides for High-Performance Composite Applications

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Performance requirements for polymer matrix composites (PMCs) in aerospace and transportation applications are generally quite stringent. Among these requirements are excellent thermal stability, high strength and high toughness. Easy processing is also desirable. Electron-beam (e-beam) curing has the potential to significantly reduce the overall cost of manufacturing PMC parts for use in aerospac ...

    SBIR Phase I 2001 National Aeronautics and Space Administration
  5. HIGH-TEMPERATURE FINISH FOR AMB-21 MATRIX COMPOSITES

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 National Aeronautics and Space Administration
  6. Superconducting Magnetic Energy Storage for Maglifter Launch Assist

    SBC: Advanced Magnet Lab, Inc.            Topic: N/A

    NASA is considering an electromagnetic catapult, the MagLifter to lowerthe cost of cargo delivery to space and improve launch reliability. Acarrier sled, levitated and propelled by magnets, provides an inintialvelocity to a space transportation vehicle. For Large payloads, therequired energy for this launch assist is in the range of 20 gigajoulewith peak-power requirements of several gigawatt.Usin ...

    STTR Phase I 2001 National Aeronautics and Space Administration
  7. Universal Superconducting Magnets for MagLifter Launch Assist Sleds

    SBC: Advanced Magnet Lab, Inc.            Topic: N/A

    NASA is considering an electromagnetic catapult, the MagLifter to lowerthe cost of cargo delivery to space. A carrier sled levitated and propelledby magnets provides the initial velocity to a space transportation vehicle.Superconducting magnets enable higher fields at lower weights than normalconducting magnets and consequently a significantly larger clearancebetween the guideway and the carrier s ...

    STTR Phase I 2001 National Aeronautics and Space Administration
  8. Swirl Annular Combustor for Aircraft Gas Turbine Engines

    SBC: Advanced Projects Research, Incorporated            Topic: N/A

    This proposal describes an innovative Ultra-Low NOx annular swirl combustor concept for aircraft gas turbine engines. The concept is based on previously demonstrated means for creating high mixing rate regions in free shear flows by manipulating existing vorticity to create multiple discrete vortices in the flow. This mixing technique coupled with a Lean-Burn Direct-Ignition (LBDI) combustion stra ...

    SBIR Phase I 1994 National Aeronautics and Space Administration
  9. Biomimetics Based Design of Damage Tolerant Airframe Panels

    SBC: AeroChem Corporation            Topic: N/A

    The specific innovation proposed is to design an advanced composite airframe panel for damage tolerance by incorporating biologic solutions to a similar problem found in nature, using a biomimetic approach. We will identify principal material (fiber) directions and density profiles about naturally occurring holes in bones through a microscopic and radiographic techniques. These holes are known to ...

    SBIR Phase I 2001 National Aeronautics and Space Administration
  10. LOW-COST DESIGN AND ANALYSIS METHOD FOR HYDROSTATIC BEARINGS

    SBC: AFAB Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government