You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. WEIGHING TRUCK COMBINATIONS IN MOTION, SOLELY ON THE TRACTOR

    SBC: Airsport Corp.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of Transportation
  2. "Rolling Deflectometer"

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
  3. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. Chalcogenide Superconductors

    SBC: Cryopower Associates, Inc.            Topic: N/A

    WE PROPOSE TO SEARCH FOR NEW SUPERCONDUCTORS THAT ARE SIMILAR TO THE PEROVSKITE-BASED HIGH TEMPERATURE SUPERCONDUCTORS (HTS), BUT WITH THE OXYGEN REPLACED BY A CHALCOGEN, THAT IS SULFUR, SELENIUM OR TELLURIUM. WE BELIEVE THAT THE HTS COPPER OXIDES ARE NOT A UNIQUE ACCIDENT OF NATURE, BUT THAT THERE ARE OTHER COMPLEX CHEMICAL COMPOUNDS THAT COULD ALSO BE SUPERCONDUCTING. AN OBVIOUS PLACE TO LOOK WO ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  5. RESTRICTED VISIBILITY WARNING SYSTEM

    SBC: Ecotek International            Topic: N/A

    ECOTEK INTERNATIONAL PROPOSES AN ALL SOLID-STATE VISIBILITY MONITORING SYSETM THAT WILL BE USED TO MONITOR VISIBILITY CONDITIONS ALONG ROADWAYS AND WARN TRAVELERS OF LOW VISIBILITY CONDITIONS. THE PURPOSE OF THE SYSTEM IS TO REDUCE THE NUMBER OF MULTIPLE-VEHICLE COLLISIONS AND CONSEQUENT FATALITIES, INJURIES, AND PROPERTY DAMAGES. THE SYSTEM IS BASED ON AN INNOVATIVE APPROACH TO A WELL-ESTABLISHED ...

    SBIR Phase I 1994 Department of Transportation
  6. Ultraspectral Imager

    SBC: KESTREL CORP            Topic: N/A

    This Phase I SBIR demonstrates the underlying technology required to construct an ultraspectral imager that has the ability to spectrally resolve molecular absorption lines while simultaneously creating a two dimensional spatial mapping. The proposed instrument will have a spectral resolution that is better than 2 cm-1 and two dimensional spatial resolution that exceeds 2 milliradian. Based on Fou ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  7. Advanced Metal Powder Manufacture for MLCC Applications

    SBC: NANOCHEM RESEARCH, INC.            Topic: N/A

    Sensors, capacitors, and conducting features such as resistors and capacitors on circuit boards are produced from metal and ceramic powders 1-12 These powders are manufactured by liquid phase precipitation routes which often start with reduction of metal salts or by solid-state routes where solid reactants are mixed, heated and then milled. The solid-state processing is generally repeated several ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  8. Embedded Sensors via Laser Engineered Net Shaping

    SBC: OPTOMEC, INC.            Topic: N/A

    Optomec Design Company proposes to use Laser Engineered Net Shaping (LENSTM), a Rapid Prototyping and Manufacturing (RP&M) technology currently under development at Sandia National Laboratories (SNL), as a new method for integrating instrumentation (e.g., embedded sensors) into metal structural components. SNL has demonstrated the ability of the LENSTM technology to produce near net shape stainles ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. A Compact X-Ray Laser

    SBC: Tetra Corporation            Topic: N/A

    The advanced technology described in this proposal promises to increase the performance of laboratory and, specifically, tabletop x-ray lasers by up to an order of magnitude. Such gains in performance coupled with compact technology will lead to the introduction of the world s first table-top, commercial x-ray laser. Tetra proposes to develop an advanced driver for the laboratory laser based upo ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  10. Ultra-high Dielectric Constant Dielectric Materials

    SBC: TPL, INC            Topic: N/A

    NON-NUCLEAR APPROACHES ARE SOUGHT FOR HIGH ENERGY DENSITIES FOR SPACE POWER SYSTEMS. ONE CRITICAL COMPONENT TO ACHIEVE IMPROVED PERFORMANCE IS CAPACITOR STORES. THESE ARE DEPENDENT UPON ADVANCES IN LOW LOSS, HIGH ENERGY/HIGH POWER DENSITY STORAGE MATERIALS. A UNIQUE INORGANIC COMPOSITE IS PROPOSED FOR INVESTIGATION AS A HIGH ENERGY DENSITY STORAGE MATERIAL. AN APPROACH IS FORMULATED BASED ON SOL-G ...

    SBIR Phase II 1996 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government