You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy
  2. Tertiary Recycling Process for Shipboard Plastic Processor Product

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

    SBIR Phase I 1996 Department of DefenseNavy
  3. WEIGHING TRUCK COMBINATIONS IN MOTION, SOLELY ON THE TRACTOR

    SBC: Airsport Corp.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of Transportation
  4. Missile Battery Damage Prediction Methodology

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Warhead design calculations and weapons effectiveness estimates require a methodology to predict the terminal ballistic structural response and the associated functional damage to operating missile batteries subjected to warhead fragment impacts at speeds up to 16,000 ft/sec. The objectives for the proposed Phase I study effort are to develop a candidate structural representation for the missile b ...

    SBIR Phase II 1994 Department of DefenseNavy
  5. Lighter-Than-Air Optical Platform

    SBC: Applied Research Associates, Inc.            Topic: N/A

    A miniaturized lighter-than-air (LTA) unmanned air vehicle (UAV) is proposed as a low altitude, station keeping, optical instrumentation platform. The advanced airship design will be derived from parameters developed during the successful Small Aerostat Surveillance System, Low Intensity Target Exploitation (SASS LITE) UAV program. This miniature airship developed by Applied Research Associates, I ...

    SBIR Phase I 1994 Department of DefenseNavy
  6. Methodology to Predict Ballistic Penetration and Damage of Composite Laminated Structures

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Current utilization of composite materials in air and surface weapons systems and structures is extensive, and the use of these materials can be expected to increase in the future. Weapons effectiveness assessments and the design of protective structures require methodologies to predict the terminal ballistic interactions between projectiles and fragments penetrating composite laminated target st ...

    SBIR Phase I 1996 Department of DefenseNavy
  7. Engineering Models of Reactive Munitions and Damage Effects

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Warhead design calculations and weapons effectiveness estimates require a methodology to predict structural response and the associated damage to air targets from reactive munitions. The objectives for the proposed Phase I study effort are to develop candidate launch conditioning, reaction initiation and reaction rate methodology, to incorporate existing ballistic, blast and quasi-static pres ...

    SBIR Phase I 1997 Department of DefenseNavy
  8. "Rolling Deflectometer"

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
  9. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  10. RESTRICTED VISIBILITY WARNING SYSTEM

    SBC: Ecotek International            Topic: N/A

    ECOTEK INTERNATIONAL PROPOSES AN ALL SOLID-STATE VISIBILITY MONITORING SYSETM THAT WILL BE USED TO MONITOR VISIBILITY CONDITIONS ALONG ROADWAYS AND WARN TRAVELERS OF LOW VISIBILITY CONDITIONS. THE PURPOSE OF THE SYSTEM IS TO REDUCE THE NUMBER OF MULTIPLE-VEHICLE COLLISIONS AND CONSEQUENT FATALITIES, INJURIES, AND PROPERTY DAMAGES. THE SYSTEM IS BASED ON AN INNOVATIVE APPROACH TO A WELL-ESTABLISHED ...

    SBIR Phase I 1994 Department of Transportation
US Flag An Official Website of the United States Government