You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. WEIGHING TRUCK COMBINATIONS IN MOTION, SOLELY ON THE TRACTOR

    SBC: Airsport Corp.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of Transportation
  2. "Rolling Deflectometer"

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
  3. Cost-effective Optical Correlator for Security Applications

    SBC: BOULDER NONLINEAR SYSTEMS, INC.            Topic: N/A

    Pattern recognition systems using optical correlation are being developed. The optical correlator is a powerful tool since it simultaneously processes large data arrays. This capability reduces data handling and process control, makes the system less susceptable to obstruction and increases throughput. An optical correlator is also a phase sensitive detector. It can read an optical phase mask ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  5. Digital Waveform-Based System for Acoustic Emission Measurement for Nondestructive Testing of Structural Steel

    SBC: Digital Wave Corp.            Topic: N/A

    Digital Wave Corporation proposed to develop a novel nondestructive testing (NDT) system for high speed acquisition and analysis of wide band acoustic emission (AE) waveforms. The system will provide the capability to detect, identify and locate crack growth in loaded steel structures. This system will incorporate the new high fidelity sensor developed by the Federal Highway Administration and a ...

    SBIR Phase I 1996 Department of Transportation
  6. RESTRICTED VISIBILITY WARNING SYSTEM

    SBC: Ecotek International            Topic: N/A

    ECOTEK INTERNATIONAL PROPOSES AN ALL SOLID-STATE VISIBILITY MONITORING SYSETM THAT WILL BE USED TO MONITOR VISIBILITY CONDITIONS ALONG ROADWAYS AND WARN TRAVELERS OF LOW VISIBILITY CONDITIONS. THE PURPOSE OF THE SYSTEM IS TO REDUCE THE NUMBER OF MULTIPLE-VEHICLE COLLISIONS AND CONSEQUENT FATALITIES, INJURIES, AND PROPERTY DAMAGES. THE SYSTEM IS BASED ON AN INNOVATIVE APPROACH TO A WELL-ESTABLISHED ...

    SBIR Phase I 1994 Department of Transportation
  7. "Transportation Planning Decision Support Systems"

    SBC: In Motion            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
  8. Extensible Beamformer for Portable Imaging Sonar

    SBC: Q-DOT, INC.            Topic: N/A

    Q-DOT proposes to develop a unizue, lower-power, low-cost beamformer for portable imaging sonars. The original two chip set will form 100 beams from 100 input channels. A 0.3 cm2 BiCMOS chip comprises a low noise amplifier (LNA), a time-gain control (TGC), an apodizer and a Delta-Signma modulation (ADC) for each channel. A 0.66 cm2 CMOS chip accepts 100 digital input channels and produces 100 d ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  9. Microwave NDT of Cracks in Structural Metals

    SBC: Raymond & Lae Engineering,            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of Transportation
  10. A Two-Dimensional Avalanche Photodiode Array Suitable for Near IR LADAR

    SBC: Silicon Mountain Design, Inc.            Topic: N/A

    SMD proposes the design and fabrication of a two-dimensional APD array. A novel APD array is proposed which requires low bias voltages, thus making it compatible with both CMOS and CCD multiplexer designs. The on-chip CMOS/CCD circuitry will allow for multiplexing of a large number of pixels to a single output. Further, each pixel in the APD array will have its own range detection circuitry allo ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government