List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. WEIGHING TRUCK COMBINATIONS IN MOTION, SOLELY ON THE TRACTOR

    SBC: Airsport Corp.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of Transportation
  2. "Rolling Deflectometer"

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
  3. RESTRICTED VISIBILITY WARNING SYSTEM

    SBC: Ecotek International            Topic: N/A

    ECOTEK INTERNATIONAL PROPOSES AN ALL SOLID-STATE VISIBILITY MONITORING SYSETM THAT WILL BE USED TO MONITOR VISIBILITY CONDITIONS ALONG ROADWAYS AND WARN TRAVELERS OF LOW VISIBILITY CONDITIONS. THE PURPOSE OF THE SYSTEM IS TO REDUCE THE NUMBER OF MULTIPLE-VEHICLE COLLISIONS AND CONSEQUENT FATALITIES, INJURIES, AND PROPERTY DAMAGES. THE SYSTEM IS BASED ON AN INNOVATIVE APPROACH TO A WELL-ESTABLISHED ...

    SBIR Phase I 1994 Department of Transportation
  4. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  5. Cost effective, rapid densification of lightweight ceramic matrix composite LRE components by gas phase reaction synthesis

    SBC: EXOTHERMICS, INC.            Topic: N/A

    Sabulon, Inc. has developed novel and rapid gas phase nitridation methods which have considerable potential for manufacturing rocket nozzle components from structurally robust and thermally stable silicon-based CMC materials in more cost-effective and rapid fashion than currently available chemical capor infiltration or polymer impregnation and pyrollysis processing techniques. This proposal advo ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  6. Cost effective, rapid densification of lightweight ceramic matrix composite LRE components by gas phase reaction synthesis

    SBC: EXOTHERMICS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  7. Low-Cost Cascade J-T Cryocooler with an Oil-Free Compressor

    SBC: CREARE LLC            Topic: N/A

    We propose to develop an inexpensive, high performance closed-cycle cascade J-T cryocooler. The cryocooler will be based on a high pressure ratio, oil-free, metal diaphragm compressor. This innovative compressor will be compact, inexpensive and extremely reliable. The compressor can either be used with single-stage mixed-gas or multi-stage cascade cycles. For a single-stage mixed gas cryocoo ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  8. Haptic Display Software for Hiqh Level Architecture Simulations

    SBC: CREARE LLC            Topic: N/A

    Future High Level Architecture (HLA) simulations will incorporate non-visual stimuli. One such stimulus will be force feedback that is provided using haptic displays. Force feedback will be instrumental in o btaining high fidelity information exchange between the simulation and the user. However, one significant problem with providing force feedback between a simulation and a user is that time ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  9. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: TPL, INC.            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government