You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Design, Manufacture, and Test of an Underwater Acoustic Intensity Probe

    SBC: Acoustech Corporation            Topic: N/A

    The Acoustech Corporation as the prime contractor and the Pennsylvania State University - Applied Research Labc-atory as the subcontractor propose to design, manufacture, and test an underwater acoustic intensity probe containing a geophone and two-hydrophones encased in a neutrally buoyant package. The results of this proposed effort are anticipated to be highly successful since the researc ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  2. WEIGHING TRUCK COMBINATIONS IN MOTION, SOLELY ON THE TRACTOR

    SBC: Airsport Corp.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of Transportation
  3. "Rolling Deflectometer"

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
  4. Motor Vehical Crash Costing Technology

    SBC: ARCCA, INC.            Topic: N/A

    With the advent of widely available PC technology, crash safety information can be cost-effectively disseminated to millions of people in an engaging and educational way. With an enticing and informative PC application, data about damages, costs, injuries and death can be personalized and grasped by anyone, particularily young drivers developing new driving behaviors. ARCCA's proposed system wil ...

    SBIR Phase I 1996 Department of Transportation
  5. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  6. Predictive Filtering of Situation Awareness Position Information

    SBC: DANIEL H WAGNER ASSOCIATES INC            Topic: N/A

    The proposed research project is directed at the problem of reducing communications requirements for Situation Awareness Target location by using an optimal Kalman filter to predict target motion, and only communicating data when the target position differs sufficiently from the position predicted by the filter. Our Phase I approach is to quantify the bandwidth limitations of the communications s ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  7. INTELLIGENT EMERGENCY MEDICAL SERVICES SYSTEM SIMULATION- IEMS(3)

    SBC: Data Communications Corp.            Topic: N/A

    THE PURPOSE OF THIS RESEARCH PROJECT IS TO DETERMINE THE FEASIBILITY OF MERGING AN EMERGENCY MEDICAL SERVICES (EMS) SIMULATOR WITH GEOGRAPHICAL INFORMATION SYSTEMS (GIS) IN ORDER TO PRODUCE IEMS(3) (INTELLIGENT EMERGENCY MEDICAL SERVICES SYSTEMS SIMULATOR), A PC-BASED SYSTEM WHICH CAN BE USED FOR BOTH ADDRESSING STRATEGIC PLANNING ISSUES OF EMS SYSTEMS (E.G., SYSTEM CONFIGURATION; VEHICLE LOCATION ...

    SBIR Phase I 1994 Department of Transportation
  8. RESTRICTED VISIBILITY WARNING SYSTEM

    SBC: Ecotek International            Topic: N/A

    ECOTEK INTERNATIONAL PROPOSES AN ALL SOLID-STATE VISIBILITY MONITORING SYSETM THAT WILL BE USED TO MONITOR VISIBILITY CONDITIONS ALONG ROADWAYS AND WARN TRAVELERS OF LOW VISIBILITY CONDITIONS. THE PURPOSE OF THE SYSTEM IS TO REDUCE THE NUMBER OF MULTIPLE-VEHICLE COLLISIONS AND CONSEQUENT FATALITIES, INJURIES, AND PROPERTY DAMAGES. THE SYSTEM IS BASED ON AN INNOVATIVE APPROACH TO A WELL-ESTABLISHED ...

    SBIR Phase I 1994 Department of Transportation
  9. Advanced Fasteners for Low Cost Airframe Assembly and Repair

    SBC: NAVMAR APPLIED SCIENCES CORP            Topic: N/A

    This SBIR proposes the development of the 3/16 inch diameter "Wing-It" blind fastener. This effort will include fastening both aluminum and composite sheet material. The technical objective is to demonstrate a low-cost fastener for future aircraft as an alternative to production fasteners. The "Wing-It" fastener distributes the load in the joint over a much larger area than conventional fastene ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  10. Novel Matrix Addressable Sonar Transducer

    SBC: Sensortex            Topic: N/A

    This Small Business Innovation Research Phase I will fabricate a new transducer element, which is matrix addressable, conformable and low cost. It is based on the use of a composite magnetoelectric film fabricated as a hollow cylinder. This cylinder contains both the sensing elements and the matrix-forming element. This approach builds on previous work on a composite laminar maggetoelectric mat ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government