You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Ruggedized System for Measuring Extreme Winds

    SBC: Caregiver Technologies, Inc.            Topic: N/A

    We will develop technology, termed a Ruggedized Wind Measurement System (RWMS), to measure directly extreme winds with high space and time resolution, focusing on the winds that occur beneath hurricanes at land fall. This development effort will include design, fabrication of two prototype RWMS units, and a series of proof-of-concept demonstrations in strong mountain-induced downslope and severe t ...

    SBIR Phase I 1997 Department of Commerce
  2. Commercial Game Development Using HLA and SEDRIS

    SBC: CYBERNET SYSTEMS CORPORATION            Topic: N/A

    Significant similarities exist between DoD simulation applications and networked simulation games developed for entertainment. To date, however, there has been no compelling reason for commercial game developers to adopt DoD methods and standards. Interestingly, HLA compares favorably to current commercial solutions like Microsoft's DirectPlay. There is clear benefit to DoD if HLA is embraced b ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  3. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. Machine Tool Operational Visualizer

    SBC: CNC Connection Corporation            Topic: N/A

    CNC machine tools continue to be a critical part of manufacturing; yet, a majority of the users still do not have a comprehension of how the systems function internal to the control system. With the current capability and cost benefits of personal computers and multimedia tools, the opportunity to create an educational tool to display the inner workings of the CNC system is feasible. This proposal ...

    SBIR Phase I 1997 Department of Commerce
  5. NO MOVING PARTS RAIN GAUGE

    SBC: THE CORE GROUP, INC.            Topic: N/A

    THE U.S. WEATHER SERVICE PRESENTLY USES A "TIPPING BUCKET" RAIN GAUGE FOR MEASURING RAIN ACCUMULATION. THIS DEVICE IS SENSITIVE TO WIND AND MOTION (AS ON BUOYS), CANNOT MEASURE RAIN RATE, AND REQUIRES FREQUENT MAINTENANCE, BECAUSE OF MOVING PARTS. AN ALTERNATIVE DEVICE IS BEING PROPOSED, WHICH INCORPORATES A RIGID, RESONANT TUBE, CLOSED AT THE TOP BY AN ELECTRO-ACOUSTIC TRANSDUCER, AND AT THE BOTT ...

    SBIR Phase I 1994 Department of Commerce
  6. Advanced Fasteners for Low Cost Airframe Assembly and Repair

    SBC: Damona Service Co. & Fastenix            Topic: N/A

    The Joint Venture of Damona Service Company and the Fastenix Corporation proposes to develop self-locking fasteners for airframe assembly and repair. The design concepts for these self-locking fasteners are well thought-out. A prototype fastener is made and proves the design concept works. In order to claim total success of the product, mathematics and stress models need to be developed to pred ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. Diamond Indenter Finishing Machine

    SBC: Dia-Tool Corporation            Topic: N/A

    Dia-Tool proposes herein a new manufacturing machine that will combine the processing steps of shaping the indenter and the measurement of the resulting cone into a single automated Diamond Indenter Finishing Machine. The images of the edges of the indenter cone are digitized through an imaging array and directly stored in computer memory. The indenter cone images are then transformed by image ana ...

    SBIR Phase I 1997 Department of Commerce
  8. Use of Very High Frequency Plasmas to Prepare a-SiGe Alloy Photovoltaic

    SBC: ENERGY CONVERSION DEVICES, INC.            Topic: N/A

    The program objective is to investigate the feasibility of using a very high frequency (VHF) [70 MHz] plasma technique to produce high efficiency a-SiGe:H solar cells at relatively high deposition rates. Using the VHF technique, high quality a-SiGe:H material is expected due to enhanced low energy ion bombardment of the growing film surface which has been found to be beneficial to the growth of th ...

    SBIR Phase I 1997 Department of Commerce
  9. Analysis Software for Near-Field Optical Microscopes

    SBC: Field Precision            Topic: N/A

    The near-field scanning optical microscope can supply information on the shape and electrical properties of surfaces with nanometer resolution. The quantitative interpretation of images is difficult because of the difficulty of electromagnetic field solutions in the near-field limit. We propose to supply software to aid in this analysis. The finite-element programs generate two and three-dimension ...

    SBIR Phase I 1997 Department of Commerce
  10. New Methods for Evaluating Thermal Performance of Protective Clothing for

    SBC: KTECH CORP.            Topic: N/A

    A growing number of fire fighters are suffering third degree burns; this has led to questions about the adequacy of thermal protective performance (TPP) measurements for protective clothing. A new heat flux sensor, whose response approximates that of skin, will be developed to provide better measurements of heat transfer in TPP tests. This sensor will be used with nonlinear parameter estimation an ...

    SBIR Phase I 1997 Department of Commerce
US Flag An Official Website of the United States Government