Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  2. Resin Transfer Molding of High Temperature Composites

    SBC: Maverick Corporation            Topic: N/A

    Resin Transfer Molding (RTM) offers the opportunity for significant cost savings in the fabrication of polymer matrix composite structures. However, the realization of this cost savings has been limited to lower temperature (e.g. epoxy) matrix composites. The main reason for this has been that available high temperature (e.g. polymide) composites have not possessed the characteristics which make ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  3. The Marathon Transmitter: Dramatically Extending Air Time

    SBC: NOVA ENGINEERING, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. Data Analysis Tools for HLA Simulations

    SBC: OPTIMETRICS, INC.            Topic: N/A

    OptiMetrics, Inc. proposes to develop real-time monitoring and after action review tools specifically designed to function in advanced HLA simulation environments. The development approach will include: Tailoring tools to user requirements; A highly object-oriented design; A layered design to interface between our software and the external interfaces (e.g., HLA/RTI); A preference for COTS or GOT ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  5. AgentsTools- intelligent agents for analysis and modeling

    SBC: SYSTRAN FEDERAL CORP.            Topic: N/A

    SYSTRAN, and our subcontractor , Katherine Morse of SAIC (San Diego), will design and selectively demonstrate (in Phase I), and develop and significantly demonstrate (in Phase II), a series of intelligent software agents - collectively called AgentsTools - that will effect the analysis and modeling of data collected in real-time during HLA compliant simulations. AgentsTools will be developed usin ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  6. Implementing 3-D Audio into the HLA/RTI Structure

    SBC: SYSTRAN FEDERAL CORP.            Topic: N/A

    SYSTRAN, and our partner Ball Aerospace and Technologies Corp. (BATC) - an experienced HLA user and member of the HLA Protofederation activity - will design and selectively demonstrate (in Phase I), and develop and significantly demonstrate (in Phase II) a series of techniques and processes that will allow users of idstributed simulations the ability to incorporate audio signatures, audio transmis ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. Processing of High Tg Polymers for Aircraft Canopies using a Supermicrocellular Foaming Technique

    SBC: WRIGHT MATERIALS RESEARCH CO.            Topic: N/A

    Current fighter canopy systems are fabricated using acrylics and polycarbonates which have low use temperatures, up to 220F and 300F, respectively. Wind tunnel testing of aircraft windshield showed that the transparency surface temperatures varied from 200F to 500F. Therefore, high Tg canopy systems are needed to fully utilize advanced weapon systems. Conventional processing techniques for high ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  8. HLA Federation InterConnect (FedConnect) Tool Set

    SBC: Spectra Research, Inc.            Topic: N/A

    In order to become HLA compliant, a Simulation Object Model (SOM) and interface code must be developed for every legacy model that needs to interoperate with other models in a federation. Lessons learned from the protofederation experiments proved that this is a very difficult task that can take up to three person years of effort. At this point in the HLA development, no tool set to conduct this ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  9. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: T P L, INC            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  10. Commercial Game Development Using HLA and SEDRIS

    SBC: Cybernet Systems Corporation            Topic: N/A

    Significant similarities exist between DoD simulation applications and networked simulation games developed for entertainment. To date, however, there has been no compelling reason for commercial game developers to adopt DoD methods and standards. Interestingly, HLA compares favorably to current commercial solutions like Microsoft's DirectPlay. There is clear benefit to DoD if HLA is embraced b ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government