Award Data

The current tested and proven LBVDS system is limited in the platforms that can host it due to the large volume and weight requirements of the system. Active Signal Technologies proposes to retain the high power density features of the system, but modify it to retain as much performance as feasible in a much smaller package. To achieve this, we will perform a rigorous study of materials, transdu ...

AcuSoft proposes to develop a set of HLA Development Tools to assist simulation software developers in their efforts to implement the HLA. The HLA Development Tools will support the Federation Execution and Development Process (FEDEP) and present an approach to solving the problems associated with the HLA's flexible FOM data definitions. A set of data visualization tools, such as a 2D Plan View ...

AcuSoft proposes to research and develop a Synthetic Environment RTI (SE-RTI). The SEDRIS initiative has established a new programming paradigm that provides lossless transmission of synthetic environment objects. The HLA has been designed to support interoperability and reuse of DoD simulations, and SEDRIS is a major component of HLA. Currently, the SEDRIS data model, APIs and format are prima ...

AcuSoft proposes to research and develop a database conversion tool based on the Synthetic Environment Data Representation and Interchange Specification (SEDRIS) to maximize the reusability and interchangeability of existing and future USSOCOM database. In the proposed PHASE I effort, we will investigate SEDRIS technology and develop a functioning prototype tools to demonstrate the ability to imp ...

Reducing reverberation noise, and increasing resolution drive the ability to detect, and classify underwater mines in a shallow littoral environment. This proposal addresses the problem with an analysis of reverberation noise from recorded sea tests, adaptive beamforming (ABF), and adaptive direction of arrival estimation (ADOA). In the reverberation noise analysis phase, the primary focus will be ...

Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

The interface is often a limiting factor in determining the durability of composite materials used in harsh environments. Attaining a well-bonded interface is particularly difficult with low-temperature curing matrix resin systems. A need exists for a carbon fiber adhesion promoting finish that is compatible with vinyl ester chemistry. Prior work using reactive coupling agent chemistries modifi ...

Asbestos insulation material has been used in shipboard environments for many years. While the material is usually safe when left undisturbed, it becomes a major health hazard during removal. The fine, needle like crystals that can be released into the air during handling are inhaled into the deep parts of the lung where they are known to cause cancer. Current removal procedures require a compl ...

New high temperature sizings are needed that are compatible with resin infusion processes to improve the properties and durability of carbon/polyimide composites. Compatibility with resin infusion processes includes compatibility with weaving and braiding operations and improved wetting with the infusing polyimide resin. Achieving these characteristics will result in reducing life cycle costs. ...