You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. CP-SMARTS: Cyber Physical Security for Mission-Aware Army Tactical Systems

    SBC: GRAF RESEARCH CORPORATION            Topic: OSD153005

    For this Phase 1 SBIR, we propose to create a model of cyber physical security called CP-SMARTS: Cyber Physical Security for Mission-Aware ARmy Tactical Systems.CP-SMARTS will model not only the services required of Cyber Physical Systems (such as computation, communications, control, etc.) but also Mission Assurance requirements (definitions of Mission Essential Function and corresponding vulnera ...

    SBIR Phase I 2016 Department of DefenseOffice of the Secretary of Defense
  2. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  3. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. Hydrogen Supply System for Small Proton Exchange Membrane (PEM) Fuel Cell Stacks

    SBC: Royal Systems/ Associated            Topic: N/A

    1. A conceptual baseline design of a hydrogen supply system with a on/off capability will be prepared for delivering hydrogen in increments of up to 10g/hour with a total capacity of 120g hydrogen. This baseline design will be based upon a solid state hydrogen reactant mixture with a yield of 8% by reactant weight which has been previously qualified for military use. ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  5. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: TPL, INC            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  6. Extensible Beamformer for Portable Imaging Sonar

    SBC: Q-DOT, INC.            Topic: N/A

    Q-DOT proposes to develop a unizue, lower-power, low-cost beamformer for portable imaging sonars. The original two chip set will form 100 beams from 100 input channels. A 0.3 cm2 BiCMOS chip comprises a low noise amplifier (LNA), a time-gain control (TGC), an apodizer and a Delta-Signma modulation (ADC) for each channel. A 0.66 cm2 CMOS chip accepts 100 digital input channels and produces 100 d ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. HLA Federation Implementation Tools

    SBC: SYNETICS, INC.            Topic: N/A

    Developing a set of tools that is automated, integrated, and compliant with the deired goals of this SBIR is not a simple task. If a coordinated approach is not taken from the start, then a hodgepodge of tools and capabilities for a hodgepodge of environments wil be developed with unwanted outcome of falling short of the desired goals. Therefore, SYNETICS proposes to establish a CASE-like enviro ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  8. Data Analysis Tools for HLA Simulations

    SBC: OPTIMETRICS, INC.            Topic: N/A

    OptiMetrics, Inc. proposes to develop real-time monitoring and after action review tools specifically designed to function in advanced HLA simulation environments. The development approach will include: Tailoring tools to user requirements; A highly object-oriented design; A layered design to interface between our software and the external interfaces (e.g., HLA/RTI); A preference for COTS or GOT ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  9. Development of a Commercial Multiple Degree of Freedom Measurement System

    SBC: American Research Corporation of Virginia            Topic: N/A

    The Multiple Degree of Freedom Measurement (MDFM) System, developed under Wright Laboratory, has been identified as having strong commercial potential as a significant enhancement to existing products in the machine tool industry for machine tool calibration or coordinate measuring machine enhancement. The MDFM is in need of revision to incorporate state-of-the-art technology, to prepare the devi ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  10. SMART SENSORS USING OPTICAL FIBER INTERCONNECTS AND DISTRIBUTED MEMS

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government