Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Microcomputer-Based Collateral-Effects Source Model for Hazardous Material Dispersal in Vent Plumes from Attacks on Hardened Structures

    SBC: SCIENCE & ENGINEERING ASSOC., INC.            Topic: N/A

    THE DEFENSE NUCLEAR AGENCY (DNA) IS DEVELOPING THE OPERATIONAL MESOSCALE ENVIRONMENT MODEL WITH GRID ADAPTIVITY (OMEGA) TO PREDICT REAL-TIME DISPERSAL OF HAZARDOUS AEROSOLS. ONE REQUIREMENT FOR OMEGA OR ANY SIMILAR MODEL IS TO PREDICT COLLATERAL EFFECTS FROM STRIKES ON NUCLEAR, BIOLOGICAL, AND CHEMICAL (NBC) FACILITIES. THE OBJECTIVE OF THE PROPOSED PHASE I PROGRAM IS TO DETERMINE THE ESSENTIAL FE ...

    SBIR Phase I 1994 Department of DefenseDefense Threat Reduction Agency
  2. Development of a Commercial Multiple Degree of Freedom Measurement System

    SBC: American Research Corporation of Virginia            Topic: N/A

    The Multiple Degree of Freedom Measurement (MDFM) System, developed under Wright Laboratory, has been identified as having strong commercial potential as a significant enhancement to existing products in the machine tool industry for machine tool calibration or coordinate measuring machine enhancement. The MDFM is in need of revision to incorporate state-of-the-art technology, to prepare the devi ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  3. Analysis and Improvement of Trivalent Chromium Conversion Coatings for Aluminum Alloys

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  5. EMP AND HPM SUPPRESSION TECHNIQUES

    SBC: Integrated Sciences            Topic: N/A

    Survival of present day microelectronic circuits depends on their protection from self generated and external electromagnetic interference. This proposal is oriented toward the class of interference generally referred to as overvoltage transients. Means for mitigating these transients include gas discharge tubes, and various solid state devices. Each of these has their own advantages in particu ...

    SBIR Phase I 1996 Department of DefenseDefense Threat Reduction Agency
  6. A FUEL/AIR DRIVE FLUX COMPRESSOR POWER UNIT FOR ELECTROTHERMAL GUNS

    SBC: KTECH CORP.            Topic: N/A

    The Ktech Team proposes a feasibility study of a fuel/air driven flux compression power unit (FCPU) for electric guns. Through variations of inductance gradients and through changes in scale, the proposed technology will be applicable to both electrothermal/chemical and electromagnetic guns. In the Phase 1 effort, we develop simulation models to predict the performance of the flux compression po ...

    SBIR Phase I 1996 Department of DefenseDefense Threat Reduction Agency
  7. LONGWAVE ELECTROMAGNETIC SENSOR FOR COUNTERPROLIFERATION ACTIVITIES

    SBC: Pacific-sierra Research Corp.            Topic: N/A

    We propose to design a compact, multiple purpose electromagnetic sensor for monitoring the extremely low frequency (ELF), very low frequency (VLF), and low frequency (LF) spectrum. Our goal is to design a modular, low cost sensor capable of being configured for multiple applications and capable of being employed in remote, unattended sensor networks. We describe three applications or scenarios t ...

    SBIR Phase I 1996 Department of DefenseDefense Threat Reduction Agency
  8. Hydrogen Supply System for Small Proton Exchange Membrane (PEM) Fuel Cell Stacks

    SBC: Royal Systems/ Associated            Topic: N/A

    1. A conceptual baseline design of a hydrogen supply system with a on/off capability will be prepared for delivering hydrogen in increments of up to 10g/hour with a total capacity of 120g hydrogen. This baseline design will be based upon a solid state hydrogen reactant mixture with a yield of 8% by reactant weight which has been previously qualified for military use. ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  9. Response of Dry Spore Biological Agets and Surrogates to Weapons Environment

    SBC: SCIENCE & ENGINEERING ASSOC., INC.            Topic: N/A

    The Defense Nuclear Agency hase undertaken several related programs to develop new technologies for countering the proliferation of weapons of mass destruction, including weapons which disperse dry spore biological agents. These initiatives require an increased understanding of the response o fthese agents and their surrogates to the environments generated by various weapons, including penetratin ...

    SBIR Phase I 1996 Department of DefenseDefense Threat Reduction Agency
  10. Digital Intelligence Situation Mapboard for Enhanced Situation Awareness

    SBC: Trident Systems Incorporated            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government