You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Sensor Fusion through Advanced Computing Techniques

    SBC: ABTECH CORPORATION            Topic: N/A

    AbTech Corporation proposes to apply its unique abductive information modeling (AIMTM) technology to develop a sensor fusion demonstration for command, control, communication, computer and information systems. Phase I is the necessary and sufficient precursor to an operational disparate sensor fusion for C4I applications. Phase I will show the feasibility of using AIM to model sensor data, threats ...

    SBIR Phase II 1997 Department of DefenseNavy
  2. NARROW BANDWIDTH, WIDE FIELD OF VIEW OPTICAL FILTER

    SBC: Accuwave Corp.            Topic: N/A

    Accuwave Corporation has developed a narrow bandwidth (1/8 angstrom) optical imaging filter operating in the red. A critical need exists for narrow bandwidth imaging filters with a wide field of view. In this proposed research effort, Accuwave filter technology will be extended to a wider field of view using multimple holograms stored in a LiNb03 crystal.

    SBIR Phase II 1996 Department of DefenseNavy
  3. Validation and security verification using a holographic phase mask correlator

    SBC: Accuwave Corp.            Topic: N/A

    Accuwave Corporation will study the feasibility of a volume holographic, phase-encoded optical image correlator for credit card and document validation and security application. Fourier transform holograms of a phase-encoded input image are stored using wavelength multiplexed holographic gratings in a photorefractive crystal. High spatial resolution images can be sotred with low crosstalk using ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. Compact, High Capacity Parallel Optical Memories

    SBC: Accuwave Corp.            Topic: N/A

    In this proposed SBIR program, Accuwave will investigate and demonstrate architectures for compact hologrpahic storage using materials and system innovations to reduce complexity and improve performance. Crosstalk, data formatting, input/output interfaces, and other relevant parameters will be characterized. Both wavelength and angle multiplexing, as well as its combination, will be used to prov ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  5. Holographic wide field of view imaging filter for visible and eye-safe LIDAR receivers

    SBC: Accuwave Corp.            Topic: N/A

    Accuwave Corporation will demonstrate a new approach to obtaining wide field of view imaging ( up to 15 degrees full angle) with a holographic grating filter. This new approach will make the filter element independent of the detector array dimensions, enabling resolution changes to be made without affecting the filter. This technique can also be extended to IR filters for use in eye-safe LIDAR s ...

    SBIR Phase I 1997 Department of DefenseNavy
  6. Compact optical sensor for detecting and tracking ocean-penetrating laser radar

    SBC: Accuwave Corp.            Topic: N/A

    The innovation proposed in this SBIR program is to develop a threat warning system against airborne laser radars in the blue-green transmission window. The proposed sensor system characterizes a sample through wavlelength, temporal, and spatial (theta fi) characteristics of the backscattered and source emission signals, enabling the air-borne laser radar to be identitied and tracked. The sensors ...

    SBIR Phase I 1997 Department of DefenseNavy
  7. NARROW BANDWIDTH, WIDE FIELD OF VIEW OPTICAL FILTER

    SBC: Accuwave Corp.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseNavy
  8. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy
  9. Tertiary Recycling Process for Shipboard Plastic Processor Product

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

    SBIR Phase I 1996 Department of DefenseNavy
  10. Advanced Avionics Test, Evaluation, and Analysis System

    SBC: Adroit Systems, Inc.            Topic: N/A

    Avionics flight tests are critical for evaluating weapon systems in operational environments not cost-effectively emulated in flight test. This proposal is for an AATEAS designed to provide the tools necessary to obtain optimal results during avionics testing using established techniques in various test environments. The core of the AATEAS is the Master Workstation (AMWS). This is a mini/macro com ...

    SBIR Phase I 1994 Department of DefenseNavy
US Flag An Official Website of the United States Government