You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Accelerator Pulse Power Modulators

    SBC: DIVERSIFIED TECHNOLOGIES, INC.            Topic: N/A

    160 Accelerator Pulse Power Modulators--Diversified Technologies, Inc., 35 Wiggins Avenue, Bedford, MA 01730-2314; (617) 275-9444 Dr. Marcel P.J. Gardeau, Principal Investigator Mr. Michael A. Kempkes, Business Official DOE Grant No. DE-FG02-97ER82358 Amount: $74,938 Linear colliders and accelerators used in high energy physics research require both high peak-power pulse modulators and fast op ...

    SBIR Phase I 1997 Department of Energy
  2. A Compact Neutron Generator

    SBC: Science Research Laboratory, Inc            Topic: N/A

    40870 November 13, 1996 Science Research Laboratory, Inc. Several verification technologies for nuclear nonproliferation treaties use techniques that are based upon Prompt Neutron Activation (PNA) and neutron inelastic scattering. However, the use of neutrons is severely limited by the lack of an adequate electronic source. This project will develop a c ...

    SBIR Phase I 1996 Department of Energy
  3. A Cost-Effective Technical Approach to Fabricating High Jc Bronze-Route (Nb,Ti)3Sn Superconducting Wire for Fusion Applications

    SBC: Supercon, Inc.            Topic: N/A

    41161 Supercon, Inc. This project will investigate the possibility of developing a superconducting composite wire in a cost-effective way. It is expected that use of composite filaments instead of alloy filaments will greatly improve the fabricability of the superconducting wire and cut the production cost. In addition, substitution of regular bronze with high tin bronze can enhance the overall e ...

    SBIR Phase I 1996 Department of Energy
  4. Adaptive Daylighting Systems

    SBC: Aspen Systems, Inc.            Topic: N/A

    81 Adaptive Daylighting Systems--Aspen Systems, Inc., 184 Cedar Hill Street, Marlborough, MA 01752-3017; (508) 481-5058 Mr. Glenn Demming, Principal Investigator Mr. Hamed Borhanian, Business Official DOE Grant No. DE-FG02-97ER82334 Amount: $74,981 There is a need to promote the design and development of products or systems that utilize passive solar energy in combination with energy efficien ...

    SBIR Phase I 1997 Department of Energy
  5. A Device to Increase Candle Filter Failsafe Protection and Jet Pulse Cleaning Effectiveness in Pressurized Fluidized-Bed Combustion Processes

    SBC: Industrial Filter And Pump Man            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Energy
  6. Advanced Electrocatalysts for Direct Methanol Oxidation

    SBC: Giner, Inc.            Topic: N/A

    58 Advanced Electrocatalysts for Direct Methanol Oxidation--Giner, Inc., 14 Spring Street, Waltham, MA 02154-4497; (617) 899-7270 Dr. John A. Kosek, Principal Investigator Dr. Anthony B. LaConti, Business Official DOE Grant No. DE-FG02-97ER82405 Amount: $74,974 In an effort to reduce airborne emissions of pollutants from vehicles and significantly improve urban air quality, fuel cells are be ...

    SBIR Phase I 1997 Department of Energy
  7. Advanced Low-Stress Bonding of Thermally Stable Polycrystalline Diamond Cutters to Tungsten Carbide Substrates

    SBC: Science Research Laboratory, Inc            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Energy
  8. ADVANCED LOW-STRESS BRAZING OF PLASMA-FACING FUSION COMPONENTS WITH HIGH ENERGY ELECTRON BEAMS

    SBC: Science Research Laboratory, Inc            Topic: N/A

    THE USE OF HIGH ENERGY (E ~ 2 TO 19 MEV) ELECTRON BEAMS (HEEB) AT HIGH AVERAGE POWER (P ~ 50 KW TO 1 MW) ALLOWS COMPRESSION ANNEALED PYROLYTIC GRAPHITE (CAPG) AND CARBON-CARBON (CC) COMPOSITE COMPONENTS TO BE JOINED TO METALLIC SUBSTRATES WITHOUT THE HIGH RESIDUAL STRESSES THAT ACCOMPANY CONVENTIONAL BRAZING. RELIABLE BRAZING OF CAPG AND CC TO COPPER ALLOYS IS NECESSARY TO FABRICATE PLASMA LIMITE ...

    SBIR Phase I 1994 Department of Energy
  9. Advanced Silicon Carbide and Beryllium/Aluminum Alloy Integrally Cooled X-ray Synchrotron Mirrors

    SBC: SSG, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Energy
  10. Advanced Water Sensor for Unmanned Aerial Vehicles

    SBC: Southwest Sciences, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Energy
US Flag An Official Website of the United States Government