Award Data

N/A

PHASE I ADDRESSES A NEW APPROACH FOR THE DESIGN OF HIGH POWER NUCLEAR TARGETS USED FOR PRODUCTION OF RADIOISOTOPES BY HIGH ENERGY CHARGED PARTICLE BEAMS, NOTABLY HIGH ENERGY PROTONS. SUCH TARGETS WILL YIELD LARGER QUANTITIES OF RADIOACTIVE SPECIES THAN PRESENTLY AVAILABLE, EITHER FOR BASIC RESEARCH (E.G., STUDIES USING RADIOACTIVE BEAMS) OR FOR APPLIED PURPOSES (E.G., PRODUCTION OF MEDICAL RADIOI ...

N/A

N/A

Not Available The Department of Defense has expressed a need for an inexpensive inertial navigation system (INS), based on small-size, low-cost inertial sensors. Earlier designs could not be employed in many practical applications due to their restrictive specifications (high cost and low accuracy). Since 1995, the technical staff of VeNIS Technologies has been actively developing a design method ...

COALESCING THE FRAGMENTED INFORMATION ASSOCIATED WITH EACH EVENT OF A HIGH-ENERGY PHYSICS DETECTOR AND THEN PROCESSING IT AT THE RATES DEMANDED BY ACCELERATOR SYSTEMS ARE AMONG THE LARGEST CHALLENGES IN THE PHYSICS COMMUNITY. NEW DETECTOR SYSTEMS CONTINUE TO INCREASE THE NUMBER OF MEASURED PARAMETERS AND SIMULTANEOUSLY INCREASE THE RESOLUTION OF DETECTOR COMPONENTS SO THAT THE VOLUME OF GENRATED ...

86 A Low Cost Acoustic Property Sensor for Measuring Natural Gas Composition in Liquid Natural Gas (LNG) Powered Vehicles--Commercial Electronics, Inc., 801 North 15th Street, Broken Arrow, OK 74012-2838; (918) 251-0925 Mr. Scott Phillips, Principal Investigator Mr. Michael A. Phillips, Business Official DOE Grant No. DE-FG03-97ER82353 Amount: $75,000 Among the various alternative fuels propos ...

AT MULTI-UNIT NUCLEAR GENRATING STATIONS, CONTROL ROOM OPERATORS ARE GENERALLY LICENSED TO OPERATE ALL SIMILAR UNITS. SIMULATOR TRAINING CONDUCTED AT THE LICENSEE TRAINING FACILITY OCCURS ON ONE SIMULATOR WHICH MAY NOT EXACTLY MIMIC ANY UNIT. INADEQUATE TRAINING ON UNIT-TO-UNIT AND UNIT-TO-SIMULATOR DIFFERENCES, IN CONJUNCTION WITH LIMITED PER-PERSON SIMULATOR TRAINING HOURS, CAN RESULT IN INCREAS ...

Not Available The proposed solution to ultra-fast concrete and steel cutting is to simultaneously increase hardness and toughness of a cutting tool. Novel cellular cermet cutting tool inserts offer an order of magnitude increase in cutting rates compared to traditional carbide or ceramic cutting tool inserts. The actual form of a cellular insert will be in form of a coating (between 0.5mm and 1mm ...

REGULATIONS GOVERNING THE CONTROL OF PARTICULATE EMISSIONS ARE BECOMING INCREASINGLY STRICT IN TERMS OF THE CONTROL EFFICIENCIES THEY REQUIRE. SEVERAL DRIVING FORCES ARE RESPONSIBLE FOR THIS TREND, FOREMOST OF WHICH IS THE NEED TO CONTROL TOXIC AIR EMISSIONS, SUCH AS TRACE METALS AND HEAVY ORGANIC COMPOUNDS. OTHER DRIVING FORCES INCLUDE THE AMBIENT AIR QUALITY REGULATIONS AND STATE AND LOCAL REG ...