You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Novel Recycling Process for Aircraft Transparencies

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for reclaiming scrap aircraft transparency materials. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200 C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Met ...

    SBIR Phase I 1995 Department of DefenseAir Force
  2. RECYCLING PROCESS FOR AIRCRAFT PLASTICS AND COMPOSITES

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of DefenseAir Force
  3. Advanced Aluminum Alloy: Extruded Thin Wall Structural Concepts

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    The primary objective of this proposed work is to develop a method of producing integrally stiffened, complex shaped monolithic structural components in high strength aluminum alloys at a lower cost and lighter weight than equivalent conventional built-up assemblies. In Phase I the feasibility of attaining this objective will be demonstrated by conducting a series of subscale experiments based upo ...

    SBIR Phase I 1994 Department of DefenseAir Force
  4. Development of Smart Structures Employing Novel Melt Spun Piezoelectric Fibers

    SBC: Sensintel Inc.            Topic: N/A

    Functionally smart materials, which have to ability to perform both sensing and actuating operations, are being developed to perform many aircraft type of control events. Smart materials, fabricated suing "continuous ferroelectric fibers," are being consider for full flight control of subsonic missiles, as the servoactuator system, specifically, and for active aerodynamic surface cont ...

    SBIR Phase I 1996 Department of DefenseAir Force
  5. Composite Reinforcing Fiber and Interfacial Coating Process

    SBC: Sensintel Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseAir Force
  6. Processing of Selectively-Discontinuous-Fiber (SDF) Composite Materials

    SBC: Advanced Composite Operations            Topic: N/A

    This proposal is directed at creating discontinuous unidirectional composite from continuous unidirectional prepreg. The process, Selectively-Discontinuous-Fiber (SDF), introduces micro-cuts in preimpregnated unidirectional materials at specified locations. This process will allow unidirectional composite prepreg to be used for the fabrication of complex-compound components that have be ...

    SBIR Phase I 1996 Department of DefenseAir Force
  7. Electromagnetic Coupling to Satellite Cavities

    SBC: ADVANCED ELECTROMAGNETICS            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseAir Force
  8. Augmenting Fire Fighter Training With Virtual Reality Technology

    SBC: 5, Inc. (full Immersion            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseAir Force
  9. LIGHT-WEATHER DATABASE FOR REENTRY TECHNOLOGIES

    SBC: Aeromet, Inc.            Topic: N/A

    DEVELOPMENT OF A PLAN AND ITS DEMONSTRATION IN PRODUCING MODERN DATABASE FOR RV TECHNOLOGIES IS PROPOSED BY USING CLOUD MICROPHYSICAL DATA SETS COLLECTED SINCE 1985 OVER THE NORTH AMERICAN CONTINENT AND U.S. ARMY KWAJALEIN ATOLL. THE PLAN INCLUDES THE USE OF AIRBORNE RADAR, MODELING, AND SATELLITE ADDITIONS TO THE PARTICLE SIZE DATA TO CORRELATE PARTICLE SIZE AND LIQUID WATER CONTENT OVER AN EXTEN ...

    SBIR Phase I 1990 Department of DefenseAir Force
  10. DESIGN OF A STAR HYPERVELOCITY EML SYSTEM FOR AIR FORCE REQUIREMENTS

    SBC: American Advanced Technologies            Topic: N/A

    THE WORK PROPOSED WILL RESULT IN A COMPLETE, PRELIMINARY SYSTEM DESIGN OF AN ELECTROMAGNETIC PROJECTILE LAUNCHER, BASED ON THE STAR EML CONCEPT DEVELOPED BY AMERICAN ADVANCED TECHNOLOGIES. THE COMPLETED DESIGN WILL PERMIT THE AIR FORCE TO COMPARE THE PERFORMANCE, WEIGHT AND SIZE OF THE STAR EML WITH OTHER CONCEPTS BEING INVESTIGATED. THE STAR EML SYSTEM IS OF INTEREST TO THE AIR FORCE BECAUSE THE ...

    SBIR Phase I 1988 Department of DefenseAir Force
US Flag An Official Website of the United States Government