You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Optical Link for Cryogenic FPA Readout Using Si Circuitry and Thin Film Emitters, Detectors, and Modulators

    SBC: Abj Integration Technologies,            Topic: N/A

    Standard Digital CMOS silicon circuits will have high quality Thin Film emitters, and modulators integrated on to the silicon using epitaxial liftoff and results in low cost opto-electronics in the near future. ABJ Integration is a leader in the field and proposes to design an optimized FPA readout system using this technology. Both emitters and modulators as signal sources will be investigated.

    SBIR Phase I 1995 Department of DefenseArmy
  2. Optoelectronic Packaging for Through-Substrate Communications

    SBC: Abj Integration Technologies,            Topic: N/A

    ABJ Integration Technologies, Inc. proposes to model a vertically optically interconnected stack of silicon integrated circuits to form a three dimensional system. This 3D system will utilize through-substrate optoelectronic communication to which the package and silicon are optically transparent. System optimization for user specifications will include materials and components such as emitters ...

    SBIR Phase I 1997 Department of DefenseArmy
  3. Damage Detection in Thick Walled Composites Using Surface Mounted Piezoelectric Elements

    SBC: Active Control eXperts, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseArmy
  4. Aided recovery from Visual Loss

    SBC: AMS. Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseArmy
  5. ONE-WAY DOPPLER MEASUREMENT

    SBC: ADCOM SYSTEMS TECHNOLOGY,INC.            Topic: N/A

    INNOVATIVE APPROACHES ARE DESCRIBED IN THIS PROPOSAL FOR SUPPRESSING FREQUENCY MODULATION ON A SINUSOIDAL CARRIER. PARTICULAR EMPHASIS IS DIRECTED TO THE SUPPRESSION OF IDENTIFIABLE COMPONENTS OF A COMPOSITE MODULATION PROCESS FOR THE PURPOSE OF RETAINING, FOR SEPARATE MEASUREMENT, ANY FORM OF RANGE-RATE DOPPLER SHIFT/MODULATION PRESENT. THE PROPOSED EFFORT WILL CONSIST OF AN ANALYTICAL STUDY FOR ...

    SBIR Phase I 1988 Department of DefenseArmy
  6. Self-Lubricating Wear Resistant Advanced Materials

    SBC: Advanced Engineered            Topic: N/A

    This proposal is focused at testing a new family of intermetallic materials for superior wear resistance in automotive applications due to the self-lubricating potential of the base material at a significant reduction in operating cost and capital investment. The proposed materials are produced by a new technique resulting in uniquely superior properties. Due to the ultrafine microstructure resu ...

    SBIR Phase I 1995 Department of DefenseArmy
  7. WASTE HEAT EXCHANGER FOR DIESEL EXHAUST POWERED AIR CONDITIONING

    SBC: Advanced Mechanical Technology, Inc.            Topic: N/A

    THE WASTE HEAT EXCHANGER IS OFTEN THE LARGEST SINGLE COMPONENT IN DIESEL-EXHAUST POWERED AIR CONDITIONING SYSTEMS, AND ON ACCOUNT OF ITS HIGH MATERIAL CONTENT, IS OFTEN THE HEAVIEST AND MOST COSTLY AS WELL. THE NEED EXISTS FOR A HEAT EXCHANGER DESIGN AND FABRICATION TECHNIQUE WHICH IS COMPACT AND LIGHTWEIGHT, RESISTS FOULING FROM EXHAUST GASES, IS EASILY CLEANED, USES INEXPENSIVE MATERIALS, AND IS ...

    SBIR Phase I 1988 Department of DefenseArmy
  8. Diesel-Fired Self-Pumping Water Heater R&D

    SBC: Advanced Mechanical Technology, Inc.            Topic: N/A

    A self-pumping water heater is proposed wherein a small portion of the water to be pumped is evaporated in a boiler and used to pressurize and heat the main stream of water. Unlike early slow direct-acting steam pumps, the proposed approach operates at moderate frequencies and is extremely compact. In Phase I, an analytical model describing the dynamics of the process would be formulated, and a pr ...

    SBIR Phase I 1993 Department of DefenseArmy
  9. Metal Hydride Preheater for M2 Diesel Burner

    SBC: Advanced Mechanical Technology, Inc.            Topic: N/A

    The XA2 gasoline burner is widely used by the military to meet a variety of food preparation and heating requirements in the field. Because of the trend toward an single-fuel Army vehicle fleet and away from gasoline as a general purpose fuel, a diesel/JPS fueled burner is sorely needed. A recently developed catalytic vapor generator together with the proposed metal-hydride preheater should prov ...

    SBIR Phase I 1997 Department of DefenseArmy
  10. Fire Control Battle Management and Decision Support System Technology

    SBC: Advanced Systems Technology, Inc.            Topic: N/A

    Future battlefields will require independent operations and increased operational tempo, placing severe burdens on weapons platform crewmembers in the areas of information flow management, data fusion, and assessment of data to arrive at the most tactically acceptable decisions. Work continues in the development of decision aids to assist direct/indirect fire weapon platform commanders in accompl ...

    SBIR Phase I 1995 Department of DefenseArmy
US Flag An Official Website of the United States Government