You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Optical Link for Cryogenic FPA Readout Using Si Circuitry and Thin Film Emitters, Detectors, and Modulators

    SBC: Abj Integration Technologies,            Topic: N/A

    Standard Digital CMOS silicon circuits will have high quality Thin Film emitters, and modulators integrated on to the silicon using epitaxial liftoff and results in low cost opto-electronics in the near future. ABJ Integration is a leader in the field and proposes to design an optimized FPA readout system using this technology. Both emitters and modulators as signal sources will be investigated.

    SBIR Phase I 1995 Department of DefenseArmy
  2. Optoelectronic Packaging for Through-Substrate Communications

    SBC: Abj Integration Technologies,            Topic: N/A

    ABJ Integration Technologies, Inc. proposes to model a vertically optically interconnected stack of silicon integrated circuits to form a three dimensional system. This 3D system will utilize through-substrate optoelectronic communication to which the package and silicon are optically transparent. System optimization for user specifications will include materials and components such as emitters ...

    SBIR Phase I 1997 Department of DefenseArmy
  3. Low Complexity Adaptive Algorithms for Airborne ECCM

    SBC: Adaptronics, Inc.            Topic: N/A

    Recent research has shown that effective jammer and clutter suppression is best performed with fully space-time adaptive processing. However, allowing adaptive weights on every tap on every element is computationally prohibitive and requires too many samples to converge. Eigenvalue analysis shows that the required number of degrees of freedom (DOF) is significantly less than the dimensionality of ...

    SBIR Phase I 1994 Department of DefenseAir Force
  4. ADAPTIVE SUBBAND DECOMPOSITIONS FOR ARBITRARY TIME-FREQUENCY TILINGS

    SBC: Adaptronics, Inc.            Topic: N/A

    The extension of classical frequency domain and wavelet transformation adaptive subband decompositions result in arbitrary time frequency til. The use of a time-varying tree-structured filterbank is proposed to provide a signal dependent transform which is capable of tracking non-stationarities via local reconfigurations. Under stationary assemptions, the filterbank converges to a unitary operat ...

    SBIR Phase I 1995 Department of DefenseNavy
  5. Novel Recycling Process for Aircraft Transparencies

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for reclaiming scrap aircraft transparency materials. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200 C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Met ...

    SBIR Phase I 1995 Department of DefenseAir Force
  6. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy
  7. Tertiary Recycling Process for Shipboard Plastic Processor Product

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

    SBIR Phase I 1996 Department of DefenseNavy
  8. Electromagnetic Coupling to Satellite Cavities

    SBC: ADVANCED ELECTROMAGNETICS            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseAir Force
  9. Self-Lubricating Wear Resistant Advanced Materials

    SBC: Advanced Engineered            Topic: N/A

    This proposal is focused at testing a new family of intermetallic materials for superior wear resistance in automotive applications due to the self-lubricating potential of the base material at a significant reduction in operating cost and capital investment. The proposed materials are produced by a new technique resulting in uniquely superior properties. Due to the ultrafine microstructure resu ...

    SBIR Phase I 1995 Department of DefenseArmy
  10. Fire Control Battle Management and Decision Support System Technology

    SBC: Advanced Systems Technology, Inc.            Topic: N/A

    Future battlefields will require independent operations and increased operational tempo, placing severe burdens on weapons platform crewmembers in the areas of information flow management, data fusion, and assessment of data to arrive at the most tactically acceptable decisions. Work continues in the development of decision aids to assist direct/indirect fire weapon platform commanders in accompl ...

    SBIR Phase I 1995 Department of DefenseArmy
US Flag An Official Website of the United States Government