You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Optical Link for Cryogenic FPA Readout Using Si Circuitry and Thin Film Emitters, Detectors, and Modulators
SBC: Abj Integration Technologies, Topic: N/AStandard Digital CMOS silicon circuits will have high quality Thin Film emitters, and modulators integrated on to the silicon using epitaxial liftoff and results in low cost opto-electronics in the near future. ABJ Integration is a leader in the field and proposes to design an optimized FPA readout system using this technology. Both emitters and modulators as signal sources will be investigated.
SBIR Phase I 1995 Department of DefenseArmy -
Optoelectronic Packaging for Through-Substrate Communications
SBC: Abj Integration Technologies, Topic: N/AABJ Integration Technologies, Inc. proposes to model a vertically optically interconnected stack of silicon integrated circuits to form a three dimensional system. This 3D system will utilize through-substrate optoelectronic communication to which the package and silicon are optically transparent. System optimization for user specifications will include materials and components such as emitters ...
SBIR Phase I 1997 Department of DefenseArmy -
Self-Lubricating Wear Resistant Advanced Materials
SBC: Advanced Engineered Topic: N/AThis proposal is focused at testing a new family of intermetallic materials for superior wear resistance in automotive applications due to the self-lubricating potential of the base material at a significant reduction in operating cost and capital investment. The proposed materials are produced by a new technique resulting in uniquely superior properties. Due to the ultrafine microstructure resu ...
SBIR Phase I 1995 Department of DefenseArmy -
Fire Control Battle Management and Decision Support System Technology
SBC: Advanced Systems Technology, Inc. Topic: N/AFuture battlefields will require independent operations and increased operational tempo, placing severe burdens on weapons platform crewmembers in the areas of information flow management, data fusion, and assessment of data to arrive at the most tactically acceptable decisions. Work continues in the development of decision aids to assist direct/indirect fire weapon platform commanders in accompl ...
SBIR Phase I 1995 Department of DefenseArmy -
Nuclear Weapons Effects Phenomenology
SBC: Applied Physics Technologies Topic: N/AThe nuclear weapons community has traditionally focused on the next generation or level of weapon capability complimented by gathering and analysis of actual test data. Now, with the cessation of actual weapons testing, there is an increased need to use the actual test data in modeling techniques to better understand the phenomenology and potential effects of nuclear weapons. The first phase of ...
SBIR Phase I 1997 Department of DefenseDefense Threat Reduction Agency -
SUBSCALE TESTING OF ROCKBOLTED TUNNELS IN JOINTED MEDIA
SBC: Applied Research Associates, Inc. Topic: N/ADEVELOPMENT OF AN INNOVATIVE AND ECONOMICAL EXPERIMENTAL METHOD IS PROPOSED WHICH CAN PROVIDE THE BASIC BEHAVIOR DATA NECESSARY TO MEET THE DNA OBJECTIVE OF PROVIDING ADEQUATE ANALYSIS, DESIGN AND ASSESSMENT METHODS FOR MINIMALLY HARDENED TUNNELS. THIS DEVELOPMENT IS ACCOMPANIED BY ANALYSIS CAPABLE OF REPRESENTING THE COMPLEX INELASTIC MATERIAL BEHAVIOR OF THE ROCK MASS AND OF REPRESENTING SIMPLE ...
SBIR Phase I 1988 Department of DefenseDefense Threat Reduction Agency -
Non-Eroding Fin Materials
SBC: Applied Research Associates, Inc. Topic: N/AThis project will analyze and select promising materials and designs to be used in the plumes of tactical solid rocket motors for missile steering and control. The emphasis is on high-performance refractory materials and compatibility of material systems. The control fins experience severe thermal and severe particulate erosion environments. Missile controllability requires fins with minimal er ...
SBIR Phase I 1996 Department of DefenseArmy -
Laser Turbulence Measurements in the LB/TS
SBC: Applied Research Associates, Inc. Topic: N/ATurbulence of gas flows by its very nature is one of the most difficult things to model and measure. We propose to develop a new way of measuring the turbulence and to compare these measurements to predictions using the k-epsilon model. Typical measurements, in the past, use smoke, Schlierin or shadow graph techniques to visually infer turbulence characteristics. These features are either motio ...
SBIR Phase I 1997 Department of DefenseDefense Threat Reduction Agency -
DEVELOPMENT OF A HIGH DYNAMIC RANGE DOWNHOLE SIGNAL CONDITIONING MODULE
SBC: Applied Research Associates, Inc. Topic: N/AN/A
SBIR Phase I 1988 Department of DefenseDefense Threat Reduction Agency -
MAXIMIZING DATA ACQUISITION AND PROCESSING SYSTEM CAPABILITIES
SBC: Calculex Inc Topic: N/AA VARIETY OF HARDWRE ENHANCEMENTS HAVE BEEN MADE OVER THE YEARS TO THE HIGH ENERGY LASER DATA ACQUISITION AND PROCESSING SYSTEM (HELDAPS) AT THE WHITE SANDS MISSILE RANGE HIGH ENERGY LASER SYSTEM TEST FACILITY. THE EXISTING HELDAPS SOFTWARE DOES NOT FULLY UTILIZE THE CAPABILITIES OF THE ENHANCED SYSTEM CONFIGURATION. A PHASE I PROJECT IS PROPOSED TO SYSTEMATICALLY ANALYZE THE HELDAPS ROCESSING REQ ...
SBIR Phase I 1988 Department of DefenseArmy