You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. SCALABLE DIRECT ACCESS FRAME BUFFER

    SBC: Access Dynamics, Inc.            Topic: N/A

    CURRENT FRAME BUFFER TECHNOLOGY IS NOT OPTIMIZED FOR USE WITH GENERAL PURPOSE PROCESSORS. THIS PROPOSAL IS FOR A PROGRAM TO DEVELOP A BREADBOARD FRAME BUFFER WHICH IS EFFICIENTLY ACCESSED BY SUCH PROCESSORS. THE FRAME BUFFER IS BASED ON THE VME BUS AND IS SCALABLE TO LARGE AMOUNTS OF IMAGE MEMORY AND VERY FAST IMAGE ACQUISITION RATES. ALL IMAGE DATA IS RANDOMLY ACCESSIBLE AT HIGH SPEED. ANTICIPATE ...

    SBIR Phase I 1992 Department of DefenseDefense Advanced Research Projects Agency
  2. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy
  3. Tertiary Recycling Process for Shipboard Plastic Processor Product

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

    SBIR Phase I 1996 Department of DefenseNavy
  4. Development of Smart Structures Employing Novel Melt Spun Piezoelectric Fibers

    SBC: Sensintel Inc.            Topic: N/A

    Functionally smart materials, which have to ability to perform both sensing and actuating operations, are being developed to perform many aircraft type of control events. Smart materials, fabricated suing "continuous ferroelectric fibers," are being consider for full flight control of subsonic missiles, as the servoactuator system, specifically, and for active aerodynamic surface cont ...

    SBIR Phase I 1996 Department of DefenseAir Force
  5. Liquid Rocket Engine Combustion Components Fabricated from ZrB2/BN Composite Using Electroconsolidation (TM) Rapid Densification Technique

    SBC: Sensintel Inc.            Topic: N/A

    The goal of this program is to design and fabricate selected liquid rocket engine combustion components. This goal will be accomplished by developing a low-cost, near net-shape technology for fabrication and rapid densification of ablation and oxidation-resistant LRE components for a wide variety of Air Force missions. The material which will be used for this purpose is zirconium diboride/boron ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  6. Fabrication of Functional Gradient Materials Thru Solid Freeforming

    SBC: Sensintel Inc.            Topic: N/A

    Solid Free Forming of monolith and uniform discrete reinforced materials has been demonstrated by fused deposition of heavily loaded slurries. In this program we will extend the fused deposition process to functional gradient material. The composition of material deposited will be controlled by the flow rates of two individual materials that are mixed in a low dead volume head. Thus, it will be po ...

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
  7. Development of a Low Cost Technique for the Fabrication of HfC/C-fiber Composites for Propulsion Systems

    SBC: Sensintel Inc.            Topic: N/A

    The goal of this program is to develop a low cost, flexible manufacturing method for the production of Cf reinforced composites for ablation-resistant propulsion components for Theater Missile Defense (TMD) concepts. The matrix material selected for demonstration of the technology will be HfC, a material which has demonstrated good oxidation and ablation resistance at elevated temperatures.

    SBIR Phase I 1997 Department of DefenseNavy
  8. INJECTION STEREOLITHOGRAPHY METHOD FOR NET SHAPE FABRICATION OF REINFORCED CERAMIC COMPONENTS

    SBC: Sensintel Inc.            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of DefenseDefense Advanced Research Projects Agency
  9. Electromagnetic Coupling to Satellite Cavities

    SBC: ADVANCED ELECTROMAGNETICS            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseAir Force
  10. 3D IMAGING OF OPAQUE OBJECTS BY USING PHASE RETRIEVAL

    SBC: ADVANCED MODULAR POWER SYSTEMS            Topic: N/A

    As an alternative to holographic laser radar, AMPS will develop a 3-D imaging concept that collects far-field intensity speckle patterns. This kind of measurement greatly relaxes the tolerances on vibration and coherence length. However, phase retrieval will be required to retrieve a 3-D image. Phase retrieval algorithms typically utilize some type of prior knowledge about the object. In industria ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government