You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. THE PERIPHERAL COMPONENT INTERCONNECTION/SCALABLE COHERENT INTERFACE BRIDGE FOR DATA ACQUISITION AND COMPUTATION APPLICATIONS

    SBC: BI RA SYSTEMS, INC            Topic: N/A

    COALESCING THE FRAGMENTED INFORMATION ASSOCIATED WITH EACH EVENT OF A HIGH-ENERGY PHYSICS DETECTOR AND THEN PROCESSING IT AT THE RATES DEMANDED BY ACCELERATOR SYSTEMS ARE AMONG THE LARGEST CHALLENGES IN THE PHYSICS COMMUNITY. NEW DETECTOR SYSTEMS CONTINUE TO INCREASE THE NUMBER OF MEASURED PARAMETERS AND SIMULTANEOUSLY INCREASE THE RESOLUTION OF DETECTOR COMPONENTS SO THAT THE VOLUME OF GENRATED ...

    SBIR Phase I 1994 Department of Energy
  2. A Low Cost Acoustic Property Sensor for Measuring Natural Gas Composition in Liquid Natural Gas (LNG) Powered Vehicles

    SBC: Commercial Electronics, Inc.            Topic: N/A

    86 A Low Cost Acoustic Property Sensor for Measuring Natural Gas Composition in Liquid Natural Gas (LNG) Powered Vehicles--Commercial Electronics, Inc., 801 North 15th Street, Broken Arrow, OK 74012-2838; (918) 251-0925 Mr. Scott Phillips, Principal Investigator Mr. Michael A. Phillips, Business Official DOE Grant No. DE-FG03-97ER82353 Amount: $75,000 Among the various alternative fuels propos ...

    SBIR Phase I 1997 Department of Energy
  3. Noncontact Viscosity Measurement of Molten Glass Using Laser-Generated Ultrasound for Process Control During Melting and Forming Operations

    SBC: KARTA TECHNOLOGIES            Topic: N/A

    40879 November 13, 1996 Karta Technology, Inc. In almost all glass-manufacturing processes, production yield depends critically on the viscosity of the melt. Because the glass viscosity is a function of temperature, most active control systems monitor the temperature of the molten glass. However, temperature readings are not reliable for measuring viscos ...

    SBIR Phase I 1996 Department of Energy
  4. CONTAMINATION-TOLERANT ANODES FOR PROTON EXCHANGE MEMBRANE FUEL CELLS

    SBC: Lynntech Inc.            Topic: N/A

    THERE IS A RENEWED INTEREST IN FUEL CELLS AS PRIMARY POWER SOURCES FOR ELECTRIC VEHICLES. THE ACIDIC PROTON EXCHANGE MEMBRANE FUEL CELL OPERATES AT A MAXIMUM TEMPERATURE OF 95 DEGREES CENTIGRADE AND, AT PRESENT, RELIES ON THE USE OF PLATINUM-BASED ELECTROCATALYSTS. FOR ACID FUEL CELLS OPERATING AT TEMPERATURES BELOW 130 DEGREES CENTIGRADE, HYDROGEN IS THE MOST ACTIVE COMMON FUEL THAT CAN BE USED ...

    SBIR Phase I 1994 Department of Energy
  5. An Easily Dispersed Reactive Coating for Surface Decontamination

    SBC: Lynntech Inc.            Topic: N/A

    126 An Easily Dispersed Reactive Coating for Surface Decontamination--Lynntech, Inc., 7610 Eastmark Drive, Suite 105, College Station, TX 77840-4023; (409) 693-0017 Dr. Anthony Giletto, Principal Investigator Dr. Oliver J. Murphy, Business Official DOE Grant No. DE-FG03-97ER82420 Amount: $75,000 Terrorist nerve gas attacks are a growing concern facing emergency response teams. Decontam ...

    SBIR Phase I 1997 Department of Energy
  6. Novel Separation Method Based On The Electrosynthesis of Dual Oxidants

    SBC: Lynntech Inc.            Topic: N/A

    11 Novel Separation Method Based On The Electrosynthesis of Dual Oxidants--Lynntech, Inc., 7610 Eastmark Drive, Suite 105, College Station, TX 77840-4024; (409) 693-0017 Dr. Adrian Denvir, Principal Investigator Dr. Oliver J. Murphy, Business Official DOE Grant No. DE-FG03-97ER82421 Amount: $75,000 There are 110 million cubic meters of groundwater and surface water on Department of Ene ...

    SBIR Phase I 1997 Department of Energy
  7. Novel Proton Exchange Membrane (PEM) for Fuel Cell Application

    SBC: Lynntech Inc.            Topic: N/A

    40394 November 18, 1996 Lynntech, Inc. Due to their high power density for both stationary or mobile applications, fuel cells employing solid polymer electrolytes have promising applications ranging from portable power sources to electric vehicles to commercial buildings. In a fuel cell, a solid polymer electrolyte should function as an acid electrolyte, ...

    SBIR Phase I 1996 Department of Energy
  8. A New Separation and Treatment Method for Soil and Groundwater Restoration

    SBC: Lynntech Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Energy
  9. FORECASTING RESERVOIR THICKNESS WITH FRACTALS

    SBC: Nw Resources            Topic: N/A

    THE NATION DESIRES TO EXPAND THE USE OF CLEAN BURNING, COMPETITIVELY PRICED NATURAL GAS. THE INCREASED DEMAND FOR NATURAL GAS HAS PROMPTED NEW DRILLING IN ESTABLISHED GAS FIELDS. THE PROPER PLACEMENT OF THE NEW WELLS IS DEPENDENT ON THE GAS FORMATION PROPERTIES BETWEEN THE EXISTING WELLS. ONE OF THE PROPERTIES IS THE THICKNESS OF THE GAS BEARING ZONE. IT IS GENERALLY ACCEPTED THAT THE FORMATIO ...

    SBIR Phase I 1994 Department of Energy
  10. High-Flux, Low Energy, Ion Source for High Rate Ion-Assisted Deposition of Hard Coatings

    SBC: Plasmaquest, Inc.            Topic: N/A

    45 High-Flux, Low Energy, Ion Source for High Rate Ion-Assisted Deposition of Hard Coatings--PlasmaQuest, Inc., 850 North Dorothy Drive, Suite 504, Richardson, TX 75081-2769; (972) 680-1811 Dr. Chris Doughty, Principal Investigator Dr. John E. Spencer, Business Official DOE Grant No. DE-FG03-97ER82459 Amount: $75,000 Hard coatings have many applications in the transportation, manufacturing an ...

    SBIR Phase I 1997 Department of Energy
US Flag An Official Website of the United States Government