Award Data

Chlorinated hydrocarbons represent the most prevalent contaminants of groundwater in the country. When released in the subsurface, they tend to persist below the water table, and it can take decades or centuries before slow-moving groundwater completely dissolves accumulations of chlorinated solvent product. Analytical methods currently available for monitoring these compounds require extensive ...

Heavy metal species mobilized and released into the environment by technological activities tend to persist indefinitely, circulating and eventually accumulating throughout the food chain, posing a serious threat to the environment, animals, and humans. Typical industrial metal-containing discharges can be considered as point-source emissions, which in turn offer the possibility of feasible remed ...

N/A

A number of industrial processes generate wastewater with mercury contamination. Existing cleanup processes have difficulties in achieving low mercury discharge limits, especially in the presence of competing metal ions already below their discharge limits. Commercial ion exchange media are not selective for mercury, so other metal ions compete with mercury for binding sites. Consequently, excess ...

N/A

MOTOR OPERATED GATE VALVE OPERABILITY PROBLEMS AND FAILURES AT NUCLEAR POWER PLANTS ARE A MAJOR SAFETY CONCERN AS STATEDIN NRC IE BULLETIN 85-03 AND GENERIC LETTER 89-10. THIS PROPOSAL IS AIMED AT IMPROVING GATE VALVE PERFORMANCE BY (1) DEVELOPING COMPREHENSIVE PERFORMANCE PREDICTION MODELS FOR USE OVER A RANGE OF OPERATING CONDITIONS, (2) DEFINING LIMITS, BASED ON SPECIFIC DESIGNS, BEYOND WHICH E ...

MRC PROPOSES TO DEVELOP A SAFETY PERFORMANCE INDICATOR (PI) OF THE ELECTROMAGNETIC (EM) PROTECTION STATUS OF A NUCLEAR POWER PLANT (NPP). WE BELIEVE THAT SUCH A PI IS NEEDED BECAUSE: (1) EM ENVIRONMENTAL POLLUTION IS ON THE INCREASE,(2) ADDITIONAL EM THREATS MUST BE EVALUATED, AND (3) DISRUPTION OF NPP OPERATIONS BY EM EFFECTS CAN AND MUST BE AVOIDED. PREVIOUS STUDIES HAVE ADDRESSED THE ISSUE OF E ...

SOIL WASHING OR FLUSHING HAS BEEN SHOWN TO BE AN EFFECTIVE METHOD FOR REMOVING HEAVY METALS FROM METAL-CONTAMINATED SOILS AT SUPERFUND SITES. SANDY SOILS CAN OFTEN BE WASHED WITH WATER TO MOBILIZE METAL IONS IN AN AQUEOUS PHASE, BUT FOR CLAY SOILS OR SOILS WHICH CONTAIN INSOLUBLE METAL COMPOUNDS, E.G., LEAD SULFATE, OTHER ADDITIVES SUCH AS CHELATING AGENTS (EDTA) ARE USED TO EFFECT TRANSFER OF MET ...

CURRENT METAL CUTTING AND FINISHING OPERATIONS USE SKIMMING AND FILTRATION TO TRY TO SEPARATE WASTES FROM THEIR WATER BASED CUTTING FLUIDS. THE RESIDUAL LIQUID FROM THE FILTRATION CONSISTS OF ULTRAFINE METAL PARTICLES CONTAINING HAZARDOUS HEAVY METALS LIKE LEAD, ZINC, AND CADMIUM AND A TIGHTLY EMULSIFIED OIL-IN-WATER PHASE. THIS SLUDGE IS NOT AMENABLE TO FURTHER TREATMENT AND MUST BE HAULED OFF AS ...