You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Redesign of an OCU-Style MTV Model and Demonstration of Use in Command and Control

    SBC: Accel Software Engineering            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseAir Force
  2. Design, Manufacture, and Test of an Underwater Acoustic Intensity Probe

    SBC: Acoustech Corporation            Topic: N/A

    The Acoustech Corporation as the prime contractor and the Pennsylvania State University - Applied Research Labc-atory as the subcontractor propose to design, manufacture, and test an underwater acoustic intensity probe containing a geophone and two-hydrophones encased in a neutrally buoyant package. The results of this proposed effort are anticipated to be highly successful since the researc ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  3. RETENTION METHODS FOR PLASTIC ROTATING BANDS

    SBC: 3c Systems, Inc.            Topic: N/A

    THE PROBLEM IS TO DEVELOP SHALLOW DEPTH ROTATING BANDS FOR HIGH VELOCITY PROJECTILES THAT WILL MINIMIZE BARREL EROSION AND REDUCE DRAG TO AN ABSOLUTE MINIMUM, USING INEXPENSIVE METHODS OF RETAINING INJECTION-MOLDABLE THERMOPLASTIC MATERIALS. THE PROPOSED APPROACH IS TO TRADE OFF STRONGLY-RETAINED LOW DRAG ROTATING BANDS AGAINST BARREL EXIT-SEPARATING BANDS THAT ARE ASSISTED IN RETENTION INSIDE THE ...

    SBIR Phase I 1988 Department of DefenseAir Force
  4. Simulation of Critical Interior Ballistic Effects

    SBC: 3c Systems, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseArmy
  5. DEVELOPMENT OF A DEEP ULTRAVIOLET PELLICLE FOR SUBMICRON I.C. LITHOGRAPHY

    SBC: Act Inc            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseDefense Advanced Research Projects Agency
  6. COST REDUCTION DESIGNS OF A LARGE RANGE OF HIGH PERFORMANCE PM ALTERNATORS AND CONTROLS WITH A PARALLEL EMPHASIS ON...

    SBC: Active Technologies Inc.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseDefense Advanced Research Projects Agency
  7. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy
  8. Tertiary Recycling Process for Shipboard Plastic Processor Product

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

    SBIR Phase I 1996 Department of DefenseNavy
  9. Development of Smart Structures Employing Novel Melt Spun Piezoelectric Fibers

    SBC: Sensintel Inc.            Topic: N/A

    Functionally smart materials, which have to ability to perform both sensing and actuating operations, are being developed to perform many aircraft type of control events. Smart materials, fabricated suing "continuous ferroelectric fibers," are being consider for full flight control of subsonic missiles, as the servoactuator system, specifically, and for active aerodynamic surface cont ...

    SBIR Phase I 1996 Department of DefenseAir Force
  10. Liquid Rocket Engine Combustion Components Fabricated from ZrB2/BN Composite Using Electroconsolidation (TM) Rapid Densification Technique

    SBC: Sensintel Inc.            Topic: N/A

    The goal of this program is to design and fabricate selected liquid rocket engine combustion components. This goal will be accomplished by developing a low-cost, near net-shape technology for fabrication and rapid densification of ablation and oxidation-resistant LRE components for a wide variety of Air Force missions. The material which will be used for this purpose is zirconium diboride/boron ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government