You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  2. Resin Transfer Molding of High Temperature Composites

    SBC: Maverick Corporation            Topic: N/A

    Resin Transfer Molding (RTM) offers the opportunity for significant cost savings in the fabrication of polymer matrix composite structures. However, the realization of this cost savings has been limited to lower temperature (e.g. epoxy) matrix composites. The main reason for this has been that available high temperature (e.g. polymide) composites have not possessed the characteristics which make ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  3. ELECTROMAGNETIC ENVIRONMENTAL EFFECTS WITHIN A NUCLEAR POWER PLANT

    SBC: MISSION RESEARCH CORP.            Topic: N/A

    MRC PROPOSES TO DEVELOP A SAFETY PERFORMANCE INDICATOR (PI) OF THE ELECTROMAGNETIC (EM) PROTECTION STATUS OF A NUCLEAR POWER PLANT (NPP). WE BELIEVE THAT SUCH A PI IS NEEDED BECAUSE: (1) EM ENVIRONMENTAL POLLUTION IS ON THE INCREASE,(2) ADDITIONAL EM THREATS MUST BE EVALUATED, AND (3) DISRUPTION OF NPP OPERATIONS BY EM EFFECTS CAN AND MUST BE AVOIDED. PREVIOUS STUDIES HAVE ADDRESSED THE ISSUE OF E ...

    SBIR Phase I 1990 Nuclear Regulatory Commission
  4. The Marathon Transmitter: Dramatically Extending Air Time

    SBC: NOVA ENGINEERING, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  5. MICRO COMPUTER BASED PARALLEL PROCESSING SYSTEM FOR CODE COMPUTATIONS

    SBC: Risk Management Systems            Topic: N/A

    N/A

    SBIR Phase I 1988 Nuclear Regulatory Commission
  6. HLA Federation InterConnect (FedConnect) Tool Set

    SBC: Spectra Research, Inc.            Topic: N/A

    In order to become HLA compliant, a Simulation Object Model (SOM) and interface code must be developed for every legacy model that needs to interoperate with other models in a federation. Lessons learned from the protofederation experiments proved that this is a very difficult task that can take up to three person years of effort. At this point in the HLA development, no tool set to conduct this ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. AgentsTools- intelligent agents for analysis and modeling

    SBC: SYSTRAN FEDERAL CORP.            Topic: N/A

    SYSTRAN, and our subcontractor , Katherine Morse of SAIC (San Diego), will design and selectively demonstrate (in Phase I), and develop and significantly demonstrate (in Phase II), a series of intelligent software agents - collectively called AgentsTools - that will effect the analysis and modeling of data collected in real-time during HLA compliant simulations. AgentsTools will be developed usin ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  8. Implementing 3-D Audio into the HLA/RTI Structure

    SBC: SYSTRAN FEDERAL CORP.            Topic: N/A

    SYSTRAN, and our partner Ball Aerospace and Technologies Corp. (BATC) - an experienced HLA user and member of the HLA Protofederation activity - will design and selectively demonstrate (in Phase I), and develop and significantly demonstrate (in Phase II) a series of techniques and processes that will allow users of idstributed simulations the ability to incorporate audio signatures, audio transmis ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  9. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: TPL, INC            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  10. Processing of High Tg Polymers for Aircraft Canopies using a Supermicrocellular Foaming Technique

    SBC: WRIGHT MATERIALS RESEARCH CO.            Topic: N/A

    Current fighter canopy systems are fabricated using acrylics and polycarbonates which have low use temperatures, up to 220F and 300F, respectively. Wind tunnel testing of aircraft windshield showed that the transparency surface temperatures varied from 200F to 500F. Therefore, high Tg canopy systems are needed to fully utilize advanced weapon systems. Conventional processing techniques for high ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government