You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy
  2. Tertiary Recycling Process for Shipboard Plastic Processor Product

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

    SBIR Phase I 1996 Department of DefenseNavy
  3. HIGH-SPEED LAUNCHER FOR FRAGMENT SIMULATOR

    SBC: Applied Research Associates, Inc.            Topic: N/A

    AN ECONOMICAL FRAGMENT LAUNCH SYSTEM IS NEEDED TO DUPLICATE WARHEAD FRAGMENT/AIR TARGET ENCOUNTER CONDITIONS ASSOCIATED WITH MODERN AIR TO AIR COMBAT. THE OBJECTIVE OF THIS EFFORT IS TO PROVIDE A DETAILED CONCEPTUAL DESIGN, INCLUDING BUILDING AND OPERATING COST ESTIMATES, FOR A LAUNCH SYSTEM CAPABLE OF PROJECTING METALLIC, PARALLELEPIPED FRAGMENTS WITH WEIGHTS IN THE RANGE OF 30-250 GRAINS (1.9-16 ...

    SBIR Phase I 1990 Department of DefenseNavy
  4. Lighter-Than-Air Optical Platform

    SBC: Applied Research Associates, Inc.            Topic: N/A

    A miniaturized lighter-than-air (LTA) unmanned air vehicle (UAV) is proposed as a low altitude, station keeping, optical instrumentation platform. The advanced airship design will be derived from parameters developed during the successful Small Aerostat Surveillance System, Low Intensity Target Exploitation (SASS LITE) UAV program. This miniature airship developed by Applied Research Associates, I ...

    SBIR Phase I 1994 Department of DefenseNavy
  5. Methodology to Predict Ballistic Penetration and Damage of Composite Laminated Structures

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Current utilization of composite materials in air and surface weapons systems and structures is extensive, and the use of these materials can be expected to increase in the future. Weapons effectiveness assessments and the design of protective structures require methodologies to predict the terminal ballistic interactions between projectiles and fragments penetrating composite laminated target st ...

    SBIR Phase I 1996 Department of DefenseNavy
  6. Engineering Models of Reactive Munitions and Damage Effects

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Warhead design calculations and weapons effectiveness estimates require a methodology to predict structural response and the associated damage to air targets from reactive munitions. The objectives for the proposed Phase I study effort are to develop candidate launch conditioning, reaction initiation and reaction rate methodology, to incorporate existing ballistic, blast and quasi-static pres ...

    SBIR Phase I 1997 Department of DefenseNavy
  7. Missile Battery Damage Prediction Methodology

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of DefenseNavy
  8. MHD ANGULAR SPIN SENSOR (MASS)

    SBC: A-TECH CORPORATION            Topic: N/A

    ATA HAS DEVELOPED SEVERAL ANGULAR SENSORS BASED ON THE MAGNETOHYDRODYNAMIC (MHD) PRINCIPLE AND CURRENTLY HOLDS A PATENT ON THE BASIC DESIGN. THE NAVY REQUIRES A PROJECTILE SPIN SENSOR WHICH CAN MEASURE THE PEAK ANGULAR VELOCITY AND INDIRECTLY, THE PROJECTILE MUZZLE VELOCITY. THIS INFORMATION CAN THEN BE USED TO SET CONTROLLED VARIABLE TIME (CVT) FUSES FOR PRECISE PROXIMITY DETONATION. AN MBD ANGUL ...

    SBIR Phase I 1988 Department of DefenseNavy
  9. RADIATION HARDENED ROBOT POSITIONER FOR TEST SAMPLES IN PROTON EXPERIMENTS

    SBC: Design Engineering Inc            Topic: N/A

    A ROBOTIC POSITIONER WILL BE DEVELOPED FOR HANDLING AND CHANGING DEVICES TO BE TESTED (DUTS) IN HAZARDOUS RADIATION ENVIRONMENTS SUCH AS THAT FOUND INSIDE THE TEST CELL OF THE BROOKHAVEN NATION LABORATORY PROTON ACCELERATOR. PRESENTLY, PERSONNEL SAFETY INDICATES A LONG "COOLING" TIME BEFORE TEST FIXTURES CAN BE ACCESSED. THIS RESULTS IN LOWERED FACILITY USEFULNESS, INCREASED REAL FACILITY COSTS AN ...

    SBIR Phase I 1990 Department of DefenseNavy
  10. Identification of Specific Protein Markers that Correlate with Initiation and Progression of Microbially Influenced Corrosion

    SBC: Geo-microbial Technologies, In            Topic: N/A

    Current Techniques for identifying microbially influenced corrosion (MIC) involve a battery of chemical, electrochemical, metallurgical, and microbiological tests. The most common method for detection and evaluation of microbial activity employs plate or tube culture technique. These methods are expensive and time consuming yielding results that may not be truly representative of the consortia of ...

    SBIR Phase I 1992 Department of DefenseNavy
US Flag An Official Website of the United States Government