You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. SCALABLE DIRECT ACCESS FRAME BUFFER

    SBC: Access Dynamics, Inc.            Topic: N/A

    CURRENT FRAME BUFFER TECHNOLOGY IS NOT OPTIMIZED FOR USE WITH GENERAL PURPOSE PROCESSORS. THIS PROPOSAL IS FOR A PROGRAM TO DEVELOP A BREADBOARD FRAME BUFFER WHICH IS EFFICIENTLY ACCESSED BY SUCH PROCESSORS. THE FRAME BUFFER IS BASED ON THE VME BUS AND IS SCALABLE TO LARGE AMOUNTS OF IMAGE MEMORY AND VERY FAST IMAGE ACQUISITION RATES. ALL IMAGE DATA IS RANDOMLY ACCESSIBLE AT HIGH SPEED. ANTICIPATE ...

    SBIR Phase I 1992 Department of DefenseDefense Advanced Research Projects Agency
  2. COST REDUCTION DESIGNS OF A LARGE RANGE OF HIGH PERFORMANCE PM ALTERNATORS AND CONTROLS WITH A PARALLEL EMPHASIS ON...

    SBC: Active Technologies Inc.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseDefense Advanced Research Projects Agency
  3. Micromachined Silicon Temperature Extreme Sensor Requiring No Power Source

    SBC: ADVANCED MICROMACHINES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
  4. Develop Exercise Software to Run on ARPA JANUS-3D Warqame in UNIX Environment

    SBC: Advanced Systems Technology, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
  5. SMALL, LOW COST, REMOTE-CONTROLLED, TURBOJET POWERED AVI- ONICS TESTBED/INEXPENSIVE TURBOJET AVIONICS PLATFORM (ITAP)

    SBC: Aero Composites            Topic: N/A

    THE ITAP REQUIRES ADVANCED TECHNOLOGY IN FABRICATION AND IN TEAM INTERACTION AS WELL. WE HAVE ASSEMBLED A CAPABLE TEAM, EAGER TO ACCOMPLISH THIS TASK. THE TECHNOLOGY FOR AIRFRAME CONSTRUCTION INVOLVES ADVANCED USE OF VACUUM FORMED GLASS AND CARBON FIBER REINFORCED EPOXY SKINS ON A ROHA-CELL PVC FOAM SANDWICH. THIS WILL PERMIT THE FABRICATION OF THE MAJOR AIRFRAME COMPONENTS IN 2 HALVES, A TOP AND ...

    SBIR Phase I 1992 Department of DefenseDefense Advanced Research Projects Agency
  6. EXPERIMENTAL EVALUATION OF THE INFLUENCE OF GEOLOGY ON EXPLOSIVE SOURCE YIELD DETERMINATION

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseDefense Advanced Research Projects Agency
  7. EXPERIMENTAL EVALUATION OF THE INFLUENCE OF SITE LAYERING AND BURST DEPTH ON RADIATED SEISMIC ENERGY

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseDefense Advanced Research Projects Agency
  8. DIAMOND P-N JUNCTION COLD CATHODE

    SBC: Applied Sciences Inc.            Topic: N/A

    A COLD CATHODE CAPABLE OF DELIVERING SEVERAL HUNDRED AMPS PER SQUARE CENTIMETER (UNDER AMBIENT CONDITIONS WITHOUT THE INTRODUCTION OF CESIUM VAPOR) WOULD BE VALUABLE FOR A NUMBER OF APPLICATIONS IN HIGH POWER HIGH FREQUENCY ELECTRONICS. ONE OF THE MOST HIGHLY SOUGHT APPLICATIONS IS THAT OF CATHODE RAY TUBE VISUAL DISPLAYS. DECREASED VOLTAGE REQUIREMENTS WOULD SIMPLIFY THE POWER SUPPLY REQUIREMENTS ...

    SBIR Phase I 1992 Department of DefenseDefense Advanced Research Projects Agency
  9. Affordable Lightweight Electronic Packaging Materials

    SBC: Cast Metal Composites            Topic: N/A

    The objective of the proposed program is to develop and demonstrate a low-cost, high thermal conductivity, low mass density material for use in electronic packaging. Target material characteristics are: less than aluminum heat sinks, thermal conductivity at least 200 W/m-k, and mass density less than aluminum. To address this objective, Cast Metal Composites, Inc. will produce lightweight, high ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  10. Solid State Growth of Advanced Ceramic Single Crystals

    SBC: CERONE, INC.            Topic: N/A

    The proposed experimental program demonstrates the technical feasibility of growing single crystals of technologically important ceramics by the solid state method. The proposed method relies on discontinuous grain growth which is often regarded as undesirable and deleterious during the sintering of many ceramics. In order to demonstrate the technical feasibility and versatility of the solid sta ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government