You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Optoelectronic Packaging for Through-Substrate Communications

    SBC: Abj Integration Technologies,            Topic: N/A

    ABJ Integration Technologies, Inc. proposes to model a vertically optically interconnected stack of silicon integrated circuits to form a three dimensional system. This 3D system will utilize through-substrate optoelectronic communication to which the package and silicon are optically transparent. System optimization for user specifications will include materials and components such as emitters ...

    SBIR Phase I 1997 Department of DefenseArmy
  2. Ultra-High-Density Arrays for Genome Research

    SBC: Accelerator Technology Corporation            Topic: N/A

    We will develop porous silicon based detector chips for the identification of biomoleculefragments. Patches of porous silicon on a silicon wafer act as active sieves, loaded with taggingmolecules, where during passage through it biomolecule fragments are identified by their response afterattachment of a tag to a modulated electric field applied across the porous patch. This technique, ifsuccessful ...

    SBIR Phase I 1994 Department of Health and Human Services
  3. Electronic Pasteurization of Meat Patties

    SBC: Accelerator Technology Corporation            Topic: N/A

    Accelerator Technology Corp. proposes to develop a compact, cost-effective elctron-beam disinfestation system for pasteurization of meat patties. The system is designed to be integrated into the production line of a conventional meat patty operation. In such operations, the patties are stamped from sheets of ground meat in rows of 4-5 patties, moving on a conveyor at the rate of ~1 row/second. ...

    SBIR Phase I 1996 Department of Agriculture

    SBC: Accelerator Technology Corporation            Topic: N/A


    SBIR Phase I 1996 Department of Health and Human Services

    SBC: Active Technologies Inc.            Topic: N/A


    SBIR Phase I 1990 Department of DefenseDefense Advanced Research Projects Agency
  6. Low Complexity Adaptive Algorithms for Airborne ECCM

    SBC: Adaptronics, Inc.            Topic: N/A

    Recent research has shown that effective jammer and clutter suppression is best performed with fully space-time adaptive processing. However, allowing adaptive weights on every tap on every element is computationally prohibitive and requires too many samples to converge. Eigenvalue analysis shows that the required number of degrees of freedom (DOF) is significantly less than the dimensionality of ...

    SBIR Phase I 1994 Department of DefenseAir Force
  7. Special Architecture to Break Speed Barriers in Real-Time Applications for Automatic Target Recognition

    SBC: 3D-Computing, Inc.            Topic: N/A

    The 3D-Flow Processor system is a new concept in very fast, real-time system architectures. The throughput of this system can reach up to 100 millin frames/sec, yet unlike currently available systems of comparable speed, it is fully programmable and extremely flexible. Algorithms for processing information from the input of multiple sensor can easily be implemented on a 3D-Flow system to achiev ...

    SBIR Phase I 1996 Department of DefenseArmy
  8. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy
  9. Tertiary Recycling Process for Shipboard Plastic Processor Product

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

    SBIR Phase I 1996 Department of DefenseNavy
  10. Ultrafast Polysilylene Scintillators

    SBC: Adherent Technologies, Inc.            Topic: N/A


    SBIR Phase I 1996 Department of Energy
US Flag An Official Website of the United States Government