You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. A Balloon Assisted Launch System

    SBC: Winzen Engineering, Inc.            Topic: N/A

    This innovation proposes the use of a thin film stratospheric balloon to lift a launch vehicle with a payload to an altitude above most of the Earth's atmosphere, then ignite the launch vehicle rocket motor. It will have the capability to carry the payload to its final destination, either into Earth orbit or to the mission design goal. This launch system will eliminate the first stage rocket thr ...

    SBIR Phase II 1996 Department of DefenseAir Force
  2. Abductive Electronics Prognostic Tool (ADEPT)

    SBC: ABTECH CORPORATION            Topic: N/A

    AbTech Corporation proposes to apply its unique Statistical Network ModelingTM technology to develop a non contact prognostic assessment tool that 1) acquires, processes, and analyzes electronic radiated signal data, 2) learns the expected characteristics and patterns of specific radiated signals measured from microelectronic semiconductor devices using AbTech's statistical network modeling techno ...

    SBIR Phase I 1997 Department of DefenseAir Force
  3. ABDUCTIVE NETWORKS FOR COMPLEX AERONAUTICAL SYSTEMS DEVELOPMENT

    SBC: ABTECH CORPORATION            Topic: N/A

    INNOVATIVE ARTIFICIAL INTELLIGENCE TECHNIQUES HAVE THE POTENTIAL TO SOLVE MANY COMPLEX AIR FORCE PROBLEMS. ADVANCES IN COMPUTING SPEED AND EXISTING SOFTWARE TECHNOLOGY ALONE ARE UNLIKELY TO RESULT IN REAL-TIME AERONAUTICAL SYSTEMS CAPABLE OF MEETING THE COMPLEX REQUIREMENTS OF THE AIR FORCE MISSION. RATHER, AN ALTERNATIVE METHODOLOGY SUCH AS ABDUCTIVE TECHNOLOGY, A NEW TECHNOLOGY PRESENTED IN THIS ...

    SBIR Phase I 1990 Department of DefenseAir Force
  4. ABDUCTIVE NETWORKS FOR SPACE SURVEILLANCE AND CLASSIFICATION

    SBC: ABTECH CORPORATION            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseAir Force
  5. A Comprehensive System for the Prevention and Remediation of Biofilms in Dental Equipment

    SBC: Lynntech Inc.            Topic: N/A

    There is a substantial body of evidence demonstrating that biofilms growing inside the water lines of dental units pose a significant risk as a source of infection. The problem has been recognized by practitioners, regulators, manufacturers, and the ADA, with the ADA proposing a set of guidelines for water quality that include a limit of 200 colony forming units per milliliter for the year 2000. ...

    SBIR Phase I 1997 Department of DefenseAir Force
  6. A Cost-Effective System for Hydraulic Conductivity Measurement and

    SBC: Monitoring Technology Corp            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of DefenseAir Force
  7. ACQUISITION, CONTROL, AND TELEMETRY SYSTEM (ACTS)

    SBC: A-TECH CORPORATION            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseAir Force
  8. Active Noise Reduction Headphones for In-Situ Audiometry Testing

    SBC: Adaptive Technologies, Inc.            Topic: N/A

    Active noise reduction (ANR) headsets have found a market niche in the hearing protection industry, thereby validating the technology of active noise control for personal applications. This Phase I project will seek to extend the application of personal ANR systems to include specialized headphones which can successfully evaluate hearing acuity in typical clinical environments. To ensure a succe ...

    SBIR Phase I 1997 Department of DefenseAir Force
  9. Adaptive Cure Controller Using Multiplexed Fiber Optic Sensors

    SBC: Luna Innovations Incorporated            Topic: N/A

    Fiber & Sensor Technologies (F&S), teaming with Virginia Tech, proposes to develop an adaptive control system for cure of thermoset resins during manufacture and repair of polymer matrix composites. Leveraging DOD-sponsored development of fiber optic cure monitor sensors, F&S will develop an embeddable "sensor string" by multi-plexing pressure, temperature, and viscosity sensors on a single optic ...

    SBIR Phase I 1996 Department of DefenseAir Force
  10. A Design Improvement Study for the CFTF Centrifuge

    SBC: Biodynamic Research Corporation            Topic: N/A

    The CFTF Centrifuge at Armstrong Laboratory will be a useful tool for crewmember training and human factors research for future high performance aircraft. The centrifuge features an accelearation of performance that is unmatched by other Air Force facilities, however, it lacks a set of powered gimbals that would allow positioning of the rider with respect to acceleration. With these additional d ...

    SBIR Phase I 1997 Department of DefenseAir Force
US Flag An Official Website of the United States Government