Award Data

We propose a plan sentinel prototype consisting of three components. The first component is the development of a plan mining tool which identifies and computes false or missing assumptions and deviations to plans and time phased tasks. The second component, the annotated database, computes plans which the plan mining tool access and parses into a logical annotated rule set. Finally, MAVIS, a to ...

N/A

Adroit Systems, Inc. will develop a Pulse Detonation Synthesis (PDS) process to manufacture ceramic powders from gas-powder reactant mixtures more efficiently and inexpensively than current methods. A high combustion rate and simple design make the PDS system capable of mass producing these powders, which are used as raw materials for high-temperature, high-performance ceramics and ceramic composi ...

N/A

Functional gradient materials (FGMs) have a microstructurally graded transition in composition (e.g. zirconia to a nickel based superalloy). The graded transition eliminates problems associated with a discrete interface such as poor mechanical strength and transport losses. They are being actively pursued by the engineering community, particularly in Japan, as a means of taking advantage of two di ...

Solid Free Forming of monolith and uniform discrete reinforced materials has been demonstrated by fused deposition of heavily loaded slurries. In this program we will extend the fused deposition process to functional gradient material. The composition of material deposited will be controlled by the flow rates of two individual materials that are mixed in a low dead volume head. Thus, it will be po ...

This Phase I project has two primary objectives. The first objective is to develop an engineering model of Resonant Tunneling Devices (RTD) to be implemented in AIM-Spice, a commercial software package running under Windows 95/NT. The development of a reliable device model is a prerequisite for the design and production of any semiconductor device technology. The RTD model will be a semi-empiri ...

This Phase I project has two primary objectives. The first objective is to evaluate the feasibility of a fully ion implanted fabrication process based on the heterodimensional 2-D MESFET. The new device, the 2-D JFET, will have p+ ion implanted sidegates which laterally modulate a thin, highly doped n-type conducting channel. The 2-D JFET should have excellent high speed, low power characteristics ...

N/A

There is a need for simple, light-weight practical instrumentation for rapid characterization of chemical and biological analytes in the modern battlefield. Recently, a surface-sensitive diode laser (SSDL), having over 1% of the mode power in the region extending 40 nm from the laser surface has been designed and fabricated. The SSDL was capable of monitoring the deposition of absorptive films a ...