You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. PULSE DETONATION SYNTHESIS FOR HIGH TEMPERATURE CERAMIC COMPOSITES AND COATINGS

    SBC: Adroit Systems, Inc.            Topic: N/A

    Adroit Systems, Inc. will develop a Pulse Detonation Synthesis (PDS) process to manufacture ceramic powders from gas-powder reactant mixtures more efficiently and inexpensively than current methods. A high combustion rate and simple design make the PDS system capable of mass producing these powders, which are used as raw materials for high-temperature, high-performance ceramics and ceramic composi ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  2. Functional Gradient Materials

    SBC: Sensintel Inc.            Topic: N/A

    Functional gradient materials (FGMs) have a microstructurally graded transition in composition (e.g. zirconia to a nickel based superalloy). The graded transition eliminates problems associated with a discrete interface such as poor mechanical strength and transport losses. They are being actively pursued by the engineering community, particularly in Japan, as a means of taking advantage of two di ...

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  3. Ion-Implanted 2-D MESFET Technology for Wireless Communications

    SBC: Advanced Device Technologies,            Topic: N/A

    This Phase I project has two primary objectives. The first objective is to evaluate the feasibility of a fully ion implanted fabrication process based on the heterodimensional 2-D MESFET. The new device, the 2-D JFET, will have p+ ion implanted sidegates which laterally modulate a thin, highly doped n-type conducting channel. The 2-D JFET should have excellent high speed, low power characteristics ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  4. NEW SENSOR FOR MEASUREMENT OF AIR MOVEMENT

    SBC: ANALYSIS AND MEASUREMENT SERVICES CORPORATION            Topic: N/A

    THIS PROPOSAL IS PREPARED IN DIRECT RESPONSE TO THE NRC'S SOLICITATION FOR AN IMPROVED DEVICE TO MEASURE AIR MOVEMENT FOR PERSONNEL RADIATION PROTECTION AND HEALTH PHYSICS APPLICATIONS IN NUCLEAR FACILITIES. THE PURPOSE OF THE NEW DEVICE IS TO PROPERLY LOCATE AIR SAMPLERS SO THAT THE AIR SAMPLED IS REPRESENTATIVE OF THE AIR INHALED BY WORKERS. ALTHOUGH AIR FLOW RATE SENSORS SUCH AS ANEMOMETERS ARE ...

    SBIR Phase I 1994 Nuclear Regulatory Commission
  5. DEGRATION OF NUCLEAR PLANT TEMPERATURE SENSORS

    SBC: ANALYSIS AND MEASUREMENT SERVICES CORPORATION            Topic: N/A

    N/A

    SBIR Phase I 1986 Nuclear Regulatory Commission
  6. EXPERIMENTAL EVALUATION OF FIBER OPTIC PRESSURE SENSORS FOR NUCLEAR POWER PLANTS

    SBC: ANALYSIS AND MEASUREMENT SERVICES CORPORATION            Topic: N/A

    N/A

    SBIR Phase I 1994 Nuclear Regulatory Commission
  7. MULTI LEVEL SECURE IMAGE OPERATING SYSTEM

    SBC: ARIES Technology Corporation            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  8. Optic Bistable Device with Low Threshold-Intensity (mw/cm2)

    SBC: BRIMROSE CORPORATION OF AMERICA            Topic: N/A

    BRIMROSE CORPORATION PROPOSES TO INVESTIGATE, DESIGN AND DEMONSTRATE A NOVEL OPTICAL BISTABLE DEVICE WITH A THRESHOLD OPTICAL INTENSITY SEVERAL ORDERS OF MAGNITUDE LOWER THAN THE CONVENTIONAL DEVICES. THIS DEVICE WILL OPERATE AT ROOM TEMPERATURE USING A LOW POWER CW LASER. ADVANTAGE OF SUCH A DEVICE WILL SIGNIFICANTLY FACILITATE THE NUMBER OF PROCESSING OPERATIONS IN OPTICAL COMPUTING AND SIGNAL P ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  9. Long Wave IR HgZnTe

    SBC: BRIMROSE CORPORATION OF AMERICA            Topic: N/A

    IR DETECTOR MATERIAL, MERCURY CADMIUM TELLURIDE HAS BEEN THE MOST MATURES AND OFTEN A MATERIAL OF CHOICE FOR ADVACNED INFRARED DETECTION. HOWEVER, IT IS EXTREMELY DIFFICULT TO PRODUCE THE MATERIAL FOR DETECTION AT A WAVELENGTH GREATER THAN 14um. THIS PROBLEM IS DUE TO EXCCESSIVE FUNNELLING AND SURFACE LEAKAGE RELATED TO DARK CURRENTS. IN RECENT YEARS MERCURY ZINC TELLURIDE (MZT) HAS EMERGED AS A S ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  10. Infrared Detectors Using Mercury Manganese Telluride

    SBC: BRIMROSE CORPORATION OF AMERICA            Topic: N/A

    In the proposed research we will investigate methods for improving the performance of very long wavelength infrared (VLWIR) photovoltaic detectors fabricated from Hg1-xMnxTe. This material was chosen because Hg1-xMnxTe has been shown to have superior mechanical, chemical and thermal stability compared Hg1-xCdxTe. During previously SBIR-BMDO funded work, Brimrose Corporation successfully fabricate ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government