You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Advanced Conformal Piezoceramic Actuators

    SBC: Active Control eXperts, Inc.            Topic: N/A

    ACX proposes to develop durable and reliable conformal geometry actuator packages. These packages will have the ability to operate as linear actuators for motion control applications as well as to conform to structures with curved surfaces for applications requiring induced strain actuation. These packages provide a protective skin offering electrical isolation, and provide a means for integration ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  2. PULSE DETONATION SYNTHESIS FOR HIGH TEMPERATURE CERAMIC COMPOSITES AND COATINGS

    SBC: Adroit Systems, Inc.            Topic: N/A

    Adroit Systems, Inc. will develop a Pulse Detonation Synthesis (PDS) process to manufacture ceramic powders from gas-powder reactant mixtures more efficiently and inexpensively than current methods. A high combustion rate and simple design make the PDS system capable of mass producing these powders, which are used as raw materials for high-temperature, high-performance ceramics and ceramic composi ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  3. Ion-Implanted 2-D MESFET Technology for Wireless Communications

    SBC: Advanced Device Technologies,            Topic: N/A

    This Phase I project has two primary objectives. The first objective is to evaluate the feasibility of a fully ion implanted fabrication process based on the heterodimensional 2-D MESFET. The new device, the 2-D JFET, will have p+ ion implanted sidegates which laterally modulate a thin, highly doped n-type conducting channel. The 2-D JFET should have excellent high speed, low power characteristics ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  4. Visible Blind Detectors for UV Surveillance

    SBC: RADIATION MONITORING DEVICES, INC.            Topic: N/A

    ADVANCES IN SEMICONDUCTOR TECHNOLOGY HAVE RESULTED IN VAST NEW TECHNOLOGICAL CAPABILITIES AND HAVE AFFECTED EVERY ASPECT OF MODERN LIFE. ONE SUCH APPLICATION WHERE ADVANCES IN SEMICONDUCTOR MATERIALS CAN HAVE A SIGNIFICANT IMPACT ON SPACE EXPLORATION IS UV DETECTORS. THE IDEAL UV DETECTOR WOULD BE A SOLID STATE DEVICE WITH HIGH RESPONSITIVITY TO UV LIGHT AND NEGLIGIBLE RESPONSITIVITY TO VISIBLE LI ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  5. Low Cost Avalanche Photodiodes and Photodiode Arrays

    SBC: RADIATION MONITORING DEVICES, INC.            Topic: N/A

    Silicon avalanche photodiodes are among the most sensitive optical detectors available today. It 11as been shown that large area APDs are potentially an excellent alternative to photomultiplier tubes (PMTs) in applications such as LIDAR, nuclear medicine, physics research and nuclear radiation measurement instrumentation. They can offer improved performance based on their compact size, solid state ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  6. NEW SENSOR FOR MEASUREMENT OF AIR MOVEMENT

    SBC: ANALYSIS AND MEASUREMENT SERVICE CORPORATION            Topic: N/A

    THIS PROPOSAL IS PREPARED IN DIRECT RESPONSE TO THE NRC'S SOLICITATION FOR AN IMPROVED DEVICE TO MEASURE AIR MOVEMENT FOR PERSONNEL RADIATION PROTECTION AND HEALTH PHYSICS APPLICATIONS IN NUCLEAR FACILITIES. THE PURPOSE OF THE NEW DEVICE IS TO PROPERLY LOCATE AIR SAMPLERS SO THAT THE AIR SAMPLED IS REPRESENTATIVE OF THE AIR INHALED BY WORKERS. ALTHOUGH AIR FLOW RATE SENSORS SUCH AS ANEMOMETERS ARE ...

    SBIR Phase I 1994 Nuclear Regulatory Commission
  7. EXPERIMENTAL EVALUATION OF FIBER OPTIC PRESSURE SENSORS FOR NUCLEAR POWER PLANTS

    SBC: ANALYSIS AND MEASUREMENT SERVICE CORPORATION            Topic: N/A

    N/A

    SBIR Phase I 1994 Nuclear Regulatory Commission
  8. Actively Cooled Minority-Carrier Devices for Power Conditioning

    SBC: AMERICAN SUPERCONDUCTOR CORPORATION            Topic: N/A

    New power semiconductor device performance is limited by cooling because high heat-flux cooling systems have not matched their increased power density. Therefore, real designs rarely achieve device ratings. American Superconductor (ASC) demonstrated CryoPower+, which cools a variety of power MOSFET topologies by direct immersion in coolants from 77-300K, with boiling where appropriate. CryoPower ( ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. Enhanced Pulse Power Using Cryogenic Electronics

    SBC: AMERICAN SUPERCONDUCTOR CORPORATION            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  10. OF NUCLEAR STORAGE FACILITIES

    SBC: Anro Engineering, Inc.            Topic: N/A

    SINCE 1975, THE USAF HAS DEVELOPED THROUGH ITS FUZING BRANCH, EGLIN AFB, A NEW CLASS OF PROXIMITY DETECTORS KNOWN AS BASEBAND REFLECTOMETER (BAR) SYSTEMS. IN ADDITION TO HAVING EXCELLENT RESOLUTION (E.G.LESS THAN A FOOT), BAR SYSTEMS HAVE BEEN MADE IMMUNE TO MANY FORMS OF JAMMING AND HAVE BEEN USED AS ALTIMETERS IN TARGET ACTIVATED MUNITIONS(TAM) APPLICATIONS AS WELL AS SENSORS FOR PROXIMITY FUZES ...

    SBIR Phase I 1984 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government