You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Compact X-Ray Laser

    SBC: Tetra Corporation            Topic: N/A

    The advanced technology described in this proposal promises to increase the performance of laboratory and, specifically, tabletop x-ray lasers by up to an order of magnitude. Such gains in performance coupled with compact technology will lead to the introduction of the world s first table-top, commercial x-ray laser. Tetra proposes to develop an advanced driver for the laboratory laser based upo ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  2. Active Mode Millimeter Wave Imaging

    SBC: K&c Tech., Inc.            Topic: N/A

    This proposal addresses an approach to millimeter wave imaging called encoded image detection (EID). The concept offers a means of achieving a low cost, all weather seeker for smart munition and submunitions. Its low cost potential makes adaptation of the imager also attractive for a variety of other military applications such as search and rescue, surveillance, and security. Most current devel ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  3. Active Multi-Functional Polymeric Material With Modulation, Switching, and Amplification Capabilities

    SBC: RADIANT RESEARCH, INC.            Topic: N/A

    The achievement in realizing low-loss waveguides on any surface of interests using photolime gel polymer motivates us to further investigate the feasibility of employing such a unique material as a multi-functional polymer that can provide modulation, switching, wavelength conversion and amplification simultaneously on any optoelectronic substrate of interest. In this program, we propose to resear ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  4. Active Suppression of Thruster Induced Seeker Jitter Using Electro-

    SBC: PROPULSION RESEARCH, INC.            Topic: N/A

    SEEKER STABILIZATION VIBRATION SUPPRESSION ELECTRO-ACTIVE MATERIALS PROPULSION RESEARCH WILL USE ITS MINIATURE "FERRO-MAGNETIC" ACTUATOR EFFORTD CAN BE USED TO CREATE A "SEEKER ANTI-MOTION SYSTEM". THIS TECHNOLOGY TAKES AN AGGRESSIVE APPROACH TOWARD "INTELLIGENTLY" MANAGING THE SEEKER DYNAMIC RESPONSE TO INDUCED MOTION BY ISOLATING IT "DYNAMICALLY" FROM THE REAMINDER OF THE AIRFRAME USING ELECTRO- ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  5. Advanced Metal Powder Manufacture for MLCC Applications

    SBC: NANOCHEM RESEARCH, INC.            Topic: N/A

    Sensors, capacitors, and conducting features such as resistors and capacitors on circuit boards are produced from metal and ceramic powders 1-12 These powders are manufactured by liquid phase precipitation routes which often start with reduction of metal salts or by solid-state routes where solid reactants are mixed, heated and then milled. The solid-state processing is generally repeated several ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  6. Advanced Projectile Diverters for Strategic Defense and Theater Missile Defense Miniature Interceptor Applications

    SBC: Tg&c Assoc., Inc.            Topic: N/A

    This proposal addresses the exploratory development and evaluation of novel thin film and/or monolithic detonators as diverters for guided spinning projectile use. A number of such detonators comprise a diverter technology termed RMDM, (for Ring Matrix Diverter Module) which, along with the SSPG (for Small Spinning Projectile Guidance) seeker, forms the basis for inexpensive miniature guided proje ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  7. AN YTTRIUM ALUMINUM PEROVSKITE BASED GAMMA-RAY DOSIMETER

    SBC: W Peter Trower Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Nuclear Regulatory Commission
  8. Application of a Novel Micromachining Process to Millimeter Wave Circuit Fabrication

    SBC: MICROFAB (WASVA MILLIMETER WAVE)            Topic: N/A

    MicroFab Research (MFR, Inc.) proposes to apply the techniques of micromachining to aid in the fabrication of millimeter wave components, thereby reducing manufacturing expenses. Many microwave applications such as radar and communication systems would be improved by shifting to higher frequencies, provided new lower cost manufacturing techniques can be found. A manufacturing technique is presente ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. Bonding of Dissimilar Materials Using Pulsed Power

    SBC: UTRON, Inc.            Topic: N/A

    BMDO seeks development of novel low-to-no outgassing joining/bonding techniques for advanced composites. Explosive welding, employing actual chemical explosives, is a versatile process that can be used, in principle, with any two materials. In some situations involving difficult materials, explosive bonding is the only practical joining method. Typically, a layer of explosive is carefully coated o ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  10. Boron Nitride Coating Process Oxidation Resistant Tribological

    SBC: SI Diamond Technology Inc            Topic: N/A

    A NEW PLASMA ASSISTED CHEMICAL VAPOR DEPOSITION (CVD0 PROCESS ACHIEVES PHENOMENALLY HIGH GROWTH RATES, EXCELLENT ADHESION AND UNIQUELY CONTROLLABLE MICROSTRUCTURES IN LOW-Z CUBIC MATERIALS AT ATMOSPHERIC PRESSURE. SI DIAMOND TECHNOLOGY, INC. PROPOSES TO EXTEND THIS TECHNOLOGY TO PRODUCE CUBIC BORON NITRIDE (cBN) COATINGS, AND EXAMINE THEIR UTILITY AS OXIDATION BARRIERS AND TRIBOLOGICAL COATINGS ON ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government