You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Acoustic Sensor Simulation and Environment Technology

    SBC: TECHNICAL SOLUTIONS, INC.            Topic: N/A

    A quality simulation which allows a user to simulate the acoustic emissions in a multi-source environment and then study the effects these conditions have on a set of acoustic sensors would be of great value. As acoustic sensors technology continues to advance with robust algorithms for detection, tracking and identification as well as high performance hardware providing real-time operation, thes ...

    SBIR Phase I 1996 Department of DefenseArmy
  2. Actuation for Compressor Surge Allevation and Stall Line Management

    SBC: Scientific Monitoring, Inc.            Topic: N/A

    Control systems that stabilize the operation of a compressor around the surge line have been demonstrated in controlled laboratory conditions on fixed speed compressors. Jet engine manufacturers are considering this technology for improving engine performance and operability by reducing the compressor surge margins that are currently built into engine control logic. To demonstrate this technolog ...

    SBIR Phase I 1996 Department of DefenseArmy
  3. Adaptive Wavelet Data Compression

    SBC: Fastman, Inc.            Topic: N/A


    SBIR Phase I 1994 Department of DefenseArmy
  4. Advanced Armor Vehicle Design

    SBC: Physics Mathematics &            Topic: N/A

    This project applies a combination of Artificial Neural Networks (ANN), Genetic Algorithms (GA), and CAD software to the problem of optimum armor design. Previous work for TACOM has established the efficacy of ANN/GA as applied to the problem of 1-D armor design. This new work will extend the concept to full 3-D vehicle geometries (CAD models). The CAD part of the code will handle the 3D data d ...

    SBIR Phase I 1997 Department of DefenseArmy

    SBC: KTECH CORP.            Topic: N/A

    The Ktech Team proposes a feasibility study of a fuel/air driven flux compression power unit (FCPU) for electric guns. Through variations of inductance gradients and through changes in scale, the proposed technology will be applicable to both electrothermal/chemical and electromagnetic guns. In the Phase 1 effort, we develop simulation models to predict the performance of the flux compression po ...

    SBIR Phase I 1996 Department of DefenseDefense Threat Reduction Agency
  6. A Generalized Event Representation Modeling and Analysis Tool

    SBC: KNOWLEDGE BASED SYSTEMS, INC.            Topic: N/A

    This SBIR Phase I project will create an event representation framework and generate a catalogue of reasoning mechanisms for transforming domain specific events into a convenient representational framework. The choice of the representation scheme used to model a domain for analysis by the neural network of fuzzy logic system can make an enormous difference in the ease and efficiency of the proble ...

    SBIR Phase I 1997 Department of DefenseArmy
  7. A High Density Liquid Hydride Based Hydrogen Storage System

    SBC: ATS-MER, LLC            Topic: N/A

    A liquid chemical hydride-based hydrogen storage system is proposed for high density hydrogen supply for fuel cell power generation applications. Research works performed at MER showed that certain liquid hydrides can be catalytically dehydrogenated at temperatures as low as 150¿C. The released hydrogen gas can be withdrawn from the system through a hydrogen permeable membrane to achieve comple ...

    SBIR Phase I 1997 Department of DefenseArmy

    SBC: Radiation Safety Engineering, Inc.            Topic: N/A


    SBIR Phase I 1994 Nuclear Regulatory Commission
  9. Air Release Valve and Control for Airbags

    SBC: Warrick & Assoc., Inc.            Topic: N/A

    An air pressure relief valve for airbags is described that has high frequency response owing to its low inertial mass. It is able to open to expose up to 2 square feet of exhaust area within .010 second, thus achieving optimum energy management. The relief valve operation is passive; it is opened and closed by variation of air pressure within the airbag, rather than any external power source. T ...

    SBIR Phase I 1997 Department of DefenseArmy
  10. A Method and Automated Support Tool for Model Correlation

    SBC: KNOWLEDGE BASED SYSTEMS, INC.            Topic: N/A

    Enterprises today rely heavily upon a wide variety of modeling methods and modeling technologies for the development of requirements for complex, software intensive systems. In general, however, (i) the different modeling methods provide very different perspectives on system information, (ii) models created with these methods are expressed in very different modeling languages, and (iii) models ar ...

    SBIR Phase I 1996 Department of DefenseArmy
US Flag An Official Website of the United States Government