You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Fabrication of Armor Composite Materials

    SBC: Adaptive Cognitive Systems            Topic: N/A

    Explosion bonding of dissimilar materials has been performed since the 1960s on a commercial basis. However, titanium and ultra high hardness steel is not currently fabricated. This research will develop baseline explosion bonding parameters for titanium and medium carbon alloy steel in the annealed condition and susequent parameters for heat treating the steel to the desired hardness. This wor ...

    SBIR Phase II 1997 Department of DefenseArmy
  2. A Novel Non-Lethal Effects Device

    SBC: Adroit Systems, Inc.            Topic: N/A

    The topic presented in this proposal has direct application to the development of non-lethal devices capable of temporarily incapacitating personnel, controlling crowds, immobilizing small vehicles, and other applications where a controlled amount of acoustic c energy needs to be delivered a a distance. The proposed effort would determine the characteristic acoustic waveforms and amplitudes gener ...

    SBIR Phase II 1997 Department of DefenseArmy
  3. Ion-Implanted 2-D MESFET Technology for Wireless Communications

    SBC: Advanced Device Technologies,            Topic: N/A

    This Phase I project has two primary objectives. The first objective is to evaluate the feasibility of a fully ion implanted fabrication process based on the heterodimensional 2-D MESFET. The new device, the 2-D JFET, will have p+ ion implanted sidegates which laterally modulate a thin, highly doped n-type conducting channel. The 2-D JFET should have excellent high speed, low power characteristics ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  4. Molecular Modeling Study of Nitration over Zeolites

    SBC: Am Technologies, Inc.            Topic: N/A

    In response to the DOD request to design and develop novel catalysts to facilitate the synthesis of energetic materials and commercially viable products, it is proposed to undertake a detailed molecular modeling studies on the structures of various zeolites and the binding of organic compounds and inorganic cations with these zeolites. New force field will be developed for these zeolites suitabl ...

    SBIR Phase I 1997 Department of DefenseArmy
  5. Si-CeO2 Silicon-On-Insulator Device Structure Grown by Laser Assisted Molecular Beam Deposition

    SBC: AMBP Technology Corporation            Topic: N/A

    We propose to develop and commercialize a Laser Assisted Molecular Beam Deposition (LAMBD) process for the growth of single crystal lattice matched CeO2 thin films on a Si substrate and thin film Si on CeO2 for the development and commercialization of silicon-on-insulator (SOI) devices and potentially Si based optoelectronic devices. CeO2 is nearly lattice matched to Si (0.35% rnismatched), which ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  6. Pulsed Arc Molecular Beam Film and Powder Production System

    SBC: AMBP Technology Corporation            Topic: N/A

    We propose to develop and commercialize a Pulsed Arc Molecular Beam Processing (PAMBP) process which can be used to produce high quality and high purity thin films as well as nanopowders. The PAMBP source uses a pulsed valve to generate gas pulses between two electrodes. During the gas pulse, an electric discharge is struck between the electrodes causing ablation of the cathode material. The ablat ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  7. Detector/Amplifier/Mixer Array for a Low Cost Imaging Ladar

    SBC: ZIMMERMAN ASSOC., INC.            Topic: N/A

    Current production ladar system and components involve coherent optical system using pulse waveform. "bile demonstrating impressive accuracy and resolution, the system are coupler, difficult to manufacture, and thereby erpensive. An alternative approach is being investigated for short range system which uses an FM/CW waveform for ranging with incoherent light detection. This approach should prod ...

    SBIR Phase I 1997 Department of DefenseArmy
  8. Low Frequency (LF), Ultra Wideband (UWB), Synthetic Aperture Radar (SAR), Antennas Compatible with Unmanned Aerial Vehicles (UAV)

    SBC: ZIMMERMAN ASSOC., INC.            Topic: N/A

    Unmanned Aerial Vehicles (UAVs) offer a lower risk and lower cost platform for the use of an Ultra Wide Band (UWE) Synthetic Aperture Radar (SAR) system for the detection of ground targets concealed by foliage. Given the size, weight, and power restrictions of a UAV, an impulse radar is an attractive radar system alternative because it offers a lighter and lower cost solution than a traditional c ...

    SBIR Phase I 1997 Department of DefenseArmy
  9. Single Pixel FM/CW Range-Only Laser Radar (LADAR)

    SBC: ZIMMERMAN ASSOC., INC.            Topic: N/A

    The main thrust of this proposed effort is to design, develop, and fabricate a low cost, producible, robust and rugged, one pixel, range-only laser radar (Ladar) fuze sensor sufficient to support the safe and reliable delivery of a ballistic round against an intended target. A CW/FW waveform is planned for use to amplitude modulate the laser diode transmitter. The returned optical energy will be ...

    SBIR Phase I 1997 Department of DefenseArmy
  10. DAXIS- Data Analysis of X-Ray Image System

    SBC: ANALYSIS & SIMULATION, INC.            Topic: N/A

    Analysis and Simulation, Inc. (AnSim) proposes to develop a Data Analysis of X-Ray Image System (DAXIS) software package. The software will analyze the digital data obtained from X-ray images using three analytical filters: wavelets, fractals, and artificial neural networks (ANN). Wavelet analysis will be used for (1) noise reduction, (2) determination of edges and curvatures, and (3) gray-scal ...

    SBIR Phase I 1997 Department of DefenseArmy
US Flag An Official Website of the United States Government