You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Sensor Fusion through Advanced Computing Techniques

    SBC: ABTECH CORPORATION            Topic: N/A

    AbTech Corporation proposes to apply its unique abductive information modeling (AIMTM) technology to develop a sensor fusion demonstration for command, control, communication, computer and information systems. Phase I is the necessary and sufficient precursor to an operational disparate sensor fusion for C4I applications. Phase I will show the feasibility of using AIM to model sensor data, threats ...

    SBIR Phase II 1997 Department of DefenseNavy
  2. Modeling Laminar to Turbulent transistion for improved high lift predictions

    SBC: AEROSOFT INC            Topic: N/A

    AeroSoft, Inc. proposes to develop, incorporate and validate transition and anisotropic turbulence models for improving the low-Reynolds number predictions for high-lift airfoil configurations. The turbulence-modeling package will use Menter's two equati

    SBIR Phase I 1997 Department of DefenseNavy
  3. Operational Trainer for FFG-7 AAW Combat System

    SBC: ZIMMERMAN ASSOC., INC.            Topic: N/A

    The proposed prototype Operational Trainer for the FFG-7 AAW Combat System will provide the US Navy with a means for training the FFG-7 AAW combat team to operate their equipment in condition 1 watch stations. Each watch station will be provided with the ability to train as they fight by allowing continuous on-board AAW training that includes all elements of the combat system with interactions as ...

    SBIR Phase I 1997 Department of DefenseNavy
  4. Fretting Wear Resistant Coatings for Turbine Engine Applications

    SBC: ANALYTICAL SERVICES & MATERIALS, INC.            Topic: N/A

    Attachment areas in the regions of rotating components of gas turbine engines degrade due to fretting wear and fatigue. Plasma sprayed coatings are often used to protect these regions. A thin, dense, Ti(C, N) composite coating based on sol-gel process is proposed. The simple, cost-effective sol-gel process will coat complex shapes and will provide superior performance against fretting wear. Di ...

    SBIR Phase I 1997 Department of DefenseNavy
  5. High Resolution Time-Frequency Representations

    SBC: AMRON CORPORATION            Topic: N/A

    The objective of the proposed Phase I work is to demonstrate the feasibility of using the Choi-Williams distribution to estimate the time ¿ frequency distribution of transients of interest to the IUSS. The specific objectives are to develop a metric for IUSS images and to show that the Choi-Williams distribution of these images may be used for classification. The Choi-Williams distribution is ...

    SBIR Phase I 1997 Department of DefenseNavy
  6. Engineering Models of Reactive Munitions and Damage Effects

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Warhead design calculations and weapons effectiveness estimates require a methodology to predict structural response and the associated damage to air targets from reactive munitions. The objectives for the proposed Phase I study effort are to develop candidate launch conditioning, reaction initiation and reaction rate methodology, to incorporate existing ballistic, blast and quasi-static pres ...

    SBIR Phase I 1997 Department of DefenseNavy
  7. Ship Manning Advanced Technology Evolution-SHIP MATE

    SBC: CARLOW INTERNATIONAL, INC.            Topic: N/A

    The anticipated result of the proposed approach will be an automated standardized and formalized design process integrated with a set of tools and data bases which will support the application of HSI to ship system and total ship design with emphasis on effectively, efficiently, and safely reducing human workloads and subsequently, ship manning. The value of the process, tools, and data bases, de ...

    SBIR Phase II 1997 Department of DefenseNavy
  8. Diagnostics & Control System-for Microwave Processing of Ceramics

    SBC: CENTER FOR REMOTE SENSING, INC.            Topic: N/A

    The development of diagnostic instruments with temporal and spatial resolution, for monitoring and controlling microwave based processing of ceramics and nanopowders is proposed. Emphasis is placed on techniques relevant to NRL's experimental plan and having significant commercial applications. Diagnostics for monitoring and possibly imaging temperature, dielectric properties and densification are ...

    SBIR Phase II 1997 Department of DefenseNavy
  9. Innovative Large Caliber Gun for Naval Gun Fire Support

    SBC: Central Technology, Inc.            Topic: N/A

    The objective of this project is to design a new large caliber naval gun to fit in a relatively small volume within a ship and yet be capable of firing ranges considerably greater than are presently available from equal caliber guns and ammunition. This gun will have a very short recoil whose greater recoil forces will be passed directly to major load bearing structure near the ship's ke ...

    SBIR Phase I 1997 Department of DefenseNavy
  10. Exploiting Chaos to Improve Signal Detection

    SBC: CHAOTIC.COM            Topic: N/A

    We will use our existing commercial grade chaotic data analysis tool kit to characterize ocean clutter and noise in hostile environments. This knowledge will be used to demonstrate how Receiver Operating Curves can be improved by reducing the mismatch between real noise and the noise model in traditional filters. We will also study the feasibility of signal detection with chaotic filters. For this ...

    SBIR Phase II 1997 Department of DefenseNavy
US Flag An Official Website of the United States Government