You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. AN OPTICAL FIBER INTRUSION LOCATION (FIBLOC) SENSOR FOR SURFACE AND SUBSURFACE PERIMETER PROTECTION

    SBC: Anro Engineering, Inc.            Topic: N/A

    THE PROPOSED FIBLOC SENSOR PROVIDES AN ECONOMIC MEANS TO PROTECT, LITERALLY, MILES OF A PREFERRED PERIMETER REGION AGAINST UNAUTHORIZED INTRUSIONS. THE OPTICAL FIBERS EMPLOYED INT HE FIBLOC SENSOR PROPAGATE CW OR PULSED INFRARED LIGHT SIGNALS WHOSE TRANSMISSION AND/OR REFLECTION SENSITIVITY IS AFFECTED BY MECHANICAL PRESSURE SUCH AS WOULD BE PRODUCED BY THE DISTENSION OF SURFACED MOUNTED FIBERS AL ...

    SBIR Phase I 1988 Department of DefenseDefense Threat Reduction Agency
  2. Batteryless Sensors for Intrusion Detection and Assessment of Threats

    SBC: Anro Engineering, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseDefense Threat Reduction Agency
  3. Nuclear Weapons Effects Phenomenology

    SBC: Applied Physics Technologies            Topic: N/A

    The nuclear weapons community has traditionally focused on the next generation or level of weapon capability complimented by gathering and analysis of actual test data. Now, with the cessation of actual weapons testing, there is an increased need to use the actual test data in modeling techniques to better understand the phenomenology and potential effects of nuclear weapons. The first phase of ...

    SBIR Phase I 1997 Department of DefenseDefense Threat Reduction Agency
  4. SUBSCALE TESTING OF ROCKBOLTED TUNNELS IN JOINTED MEDIA

    SBC: Applied Research Associates, Inc.            Topic: N/A

    DEVELOPMENT OF AN INNOVATIVE AND ECONOMICAL EXPERIMENTAL METHOD IS PROPOSED WHICH CAN PROVIDE THE BASIC BEHAVIOR DATA NECESSARY TO MEET THE DNA OBJECTIVE OF PROVIDING ADEQUATE ANALYSIS, DESIGN AND ASSESSMENT METHODS FOR MINIMALLY HARDENED TUNNELS. THIS DEVELOPMENT IS ACCOMPANIED BY ANALYSIS CAPABLE OF REPRESENTING THE COMPLEX INELASTIC MATERIAL BEHAVIOR OF THE ROCK MASS AND OF REPRESENTING SIMPLE ...

    SBIR Phase I 1988 Department of DefenseDefense Threat Reduction Agency
  5. Laser Turbulence Measurements in the LB/TS

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Turbulence of gas flows by its very nature is one of the most difficult things to model and measure. We propose to develop a new way of measuring the turbulence and to compare these measurements to predictions using the k-epsilon model. Typical measurements, in the past, use smoke, Schlierin or shadow graph techniques to visually infer turbulence characteristics. These features are either motio ...

    SBIR Phase I 1997 Department of DefenseDefense Threat Reduction Agency
  6. DEVELOPMENT OF A HIGH DYNAMIC RANGE DOWNHOLE SIGNAL CONDITIONING MODULE

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of DefenseDefense Threat Reduction Agency
  7. High Performance Dielectrics for High Energy Density Capacitors

    SBC: Aspen Systems, Inc.            Topic: N/A

    Aspen Systems proposes to develop high dielectric constant (K), low loss tellurium polymers to meet the design objectives of high energy density capacitors. In the proposed Phase I program we will apply rigorous computational chemical techniques to predict the properties of this new class of polymers. We will attempt the synthesis of the parent polymer of the tellurium family, fabricate films for ...

    SBIR Phase I 1994 Department of DefenseDefense Threat Reduction Agency
  8. SECOND GENERATION LABORATORY SIMULATOR FOR SINGLE EVENT EFFECTS TESTING OF MICROELECTRONICS

    SBC: Daniel H. Valles & Assoc.            Topic: N/A

    WE PROPOSE TO PROVE THE SCIENTIFIC AND TECHNICAL FEASIBILITY TO USE ELECTROSTATIC ACCELERATION TO BOOST THE ENERGY OF CF-252 FISSION FRAGMENTS AS A LABORATORY SIMULATION OF COSMIC RAY EFFECTS I MICROELECTRONICS. THE PROJECT OBJECTIVE IS TO BOOST THE ENERGY SUCH THAT A LARGE FRACTION OF THE ACCELERATED IONS HAVE A RANGE IN SILICON GRATER THAN 20 MICROMETERS. THIS SOLVES A NUMBER OF PROBLEMS ASSOCIA ...

    SBIR Phase I 1992 Department of DefenseDefense Threat Reduction Agency
  9. INSTRUMENTATION (ADVANCED INSTRUMENTATION FOR STANDARDIZED EMP TESTING)

    SBC: ENSCO Inc            Topic: N/A

    A GREAT DEAL OF EFFORT HAS BEEN SPENT IN RECENT YEARS TO DEVELOP STANDARDIZED METHODOLOGIES FOR ACCEPTING AND VERIFYING EMP HARDENED MILITARY FACILITIES. THE FIRST OF THESE STANDARDIZATION EFFORTS TO BE PUT INTO EFFECT APPLIES TO FIXED SITE, CRITICAL, TIME URGENT C4I FACILITIES. THE REQUIREMENTS EXISTS FOR AN ADVANCED INSTRUMENTATION APPROACH THAT CAN OVERCOME THE DIFFICULT ACQUISITION ENVIRONMENT ...

    SBIR Phase I 1992 Department of DefenseDefense Threat Reduction Agency
  10. NUCLEAR WEAPONS EFFECTS SIMULATION (INDUCTIVE COUPLER DEVELOPMENT FOR DIRECT DRIVE SIMULATION)

    SBC: ENSCO Inc            Topic: N/A

    ONE COMMON NUCLEAR WEAPONS EFFECTS CIMULATION TECHNIQUE SIMULATES THE EMP RESPONSE OF LONG CABLES USING DIRECT CURRENT INJECTION. DIRECT CURRENT INJECTION TYPICALLY INVOLVES THE CONNECTION OF HIGH VOLTAGE PULSE SOURCES TO THE CABLES THAT ARE ATTACHED TO A MILITARY SYSTEM. A RECENTLY DEVELOPED MILITARY STANDARD SPECIFIES THAT DIRECT CURRENT INJECTION TESTING WILL BE USED IN CONJUNCTION WITH SEVERAL ...

    SBIR Phase I 1992 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government