You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes
SBC: American Research Corporation of Virginia Topic: N/AN/A
SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense -
Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition
SBC: Cm Consulting Topic: N/AThe final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...
SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense -
Development of a Compact Electron Beam Accelerator
SBC: MICROWAVE TECHNOLGIES, INC. Topic: N/AN/A
SBIR Phase I 1997 Department of DefenseMissile Defense Agency -
Embedded Sensors via Laser Engineered Net Shaping
SBC: OPTOMEC, INC. Topic: N/AOptomec Design Company proposes to use Laser Engineered Net Shaping (LENSTM), a Rapid Prototyping and Manufacturing (RP&M) technology currently under development at Sandia National Laboratories (SNL), as a new method for integrating instrumentation (e.g., embedded sensors) into metal structural components. SNL has demonstrated the ability of the LENSTM technology to produce near net shape stainles ...
SBIR Phase I 1997 Department of DefenseMissile Defense Agency -
Hydrogen Supply System for Small Proton Exchange Membrane (PEM) Fuel Cell Stacks
SBC: Royal Systems/ Associated Topic: N/A1. A conceptual baseline design of a hydrogen supply system with a on/off capability will be prepared for delivering hydrogen in increments of up to 10g/hour with a total capacity of 120g hydrogen. This baseline design will be based upon a solid state hydrogen reactant mixture with a yield of 8% by reactant weight which has been previously qualified for military use. ...
SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense -
Ultrahigh Quality, Single-Crystal Bulk Silicon Carbide
SBC: INTRINSIC SEMICONDUCTOR CORP. Topic: N/ASilicon carbide materials will revolutionize semiconductor devices for military and commercial markets. The material's wide bandgap, high electric field breakdown, high thermal conductivity give SiC capabilities that far exceed those of silicon or gallium arsenide. Despite significant progress in silicon carbide development, fundamental defects--most prominently micropipes--persist. If SiC is to s ...
SBIR Phase I 1997 Department of DefenseMissile Defense Agency -
Optimal SiC Source Powder for Bulk SiC Growth
SBC: INTRINSIC SEMICONDUCTOR CORP. Topic: N/AThe properties of single-crystal silicon carbide are such that electronics devices from this material have demonstrated remarkable performance characteristics. Despite the material's promise, the material has not yet found acceptance in mainstream device markets because of the material's high cost, among other reasons. This Phase I SBIR proposes an SiC source powder with unique properties which wi ...
SBIR Phase I 1997 Department of DefenseMissile Defense Agency -
Porous Sol-Gel Derived Ceramic Release Agent
SBC: TPL, INC Topic: N/ABreathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...
SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense -
HLA Federation Implementation Tools
SBC: SYNETICS, INC. Topic: N/ADeveloping a set of tools that is automated, integrated, and compliant with the deired goals of this SBIR is not a simple task. If a coordinated approach is not taken from the start, then a hodgepodge of tools and capabilities for a hodgepodge of environments wil be developed with unwanted outcome of falling short of the desired goals. Therefore, SYNETICS proposes to establish a CASE-like enviro ...
SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense -
Development of a Commercial Multiple Degree of Freedom Measurement System
SBC: American Research Corporation of Virginia Topic: N/AThe Multiple Degree of Freedom Measurement (MDFM) System, developed under Wright Laboratory, has been identified as having strong commercial potential as a significant enhancement to existing products in the machine tool industry for machine tool calibration or coordinate measuring machine enhancement. The MDFM is in need of revision to incorporate state-of-the-art technology, to prepare the devi ...
SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense