Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Development of a Compact Electron Beam Accelerator

    SBC: MICROWAVE TECHNOLGIES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  2. Embedded Sensors via Laser Engineered Net Shaping

    SBC: OPTOMEC, INC.            Topic: N/A

    Optomec Design Company proposes to use Laser Engineered Net Shaping (LENSTM), a Rapid Prototyping and Manufacturing (RP&M) technology currently under development at Sandia National Laboratories (SNL), as a new method for integrating instrumentation (e.g., embedded sensors) into metal structural components. SNL has demonstrated the ability of the LENSTM technology to produce near net shape stainles ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  3. Ultrahigh Quality, Single-Crystal Bulk Silicon Carbide

    SBC: INTRINSIC SEMICONDUCTOR CORP.            Topic: N/A

    Silicon carbide materials will revolutionize semiconductor devices for military and commercial markets. The material's wide bandgap, high electric field breakdown, high thermal conductivity give SiC capabilities that far exceed those of silicon or gallium arsenide. Despite significant progress in silicon carbide development, fundamental defects--most prominently micropipes--persist. If SiC is to s ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  4. Optimal SiC Source Powder for Bulk SiC Growth

    SBC: INTRINSIC SEMICONDUCTOR CORP.            Topic: N/A

    The properties of single-crystal silicon carbide are such that electronics devices from this material have demonstrated remarkable performance characteristics. Despite the material's promise, the material has not yet found acceptance in mainstream device markets because of the material's high cost, among other reasons. This Phase I SBIR proposes an SiC source powder with unique properties which wi ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  5. Novel Technology for Electronic Multilayer Devices

    SBC: Sumi Tech, Inc.            Topic: N/A

    A novel technological approach was recently devised by Sumi Tech engineers to fabricate multilayer electronic components, which enables the manufacture of devices with very high volumetric efficiency and reliability. Inexpensive electrode materials such as copper, or aluminum are potential candidates, since the process takes place at relatively low ambient temperature (e.g., less than 400 C), thus ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  6. Solid-State Spray Forming of Near-Net-Shape Structural Materials

    SBC: INNOVATIVE TECHNOLOGY INC            Topic: N/A

    The objective of this research is to demonstrate the feasibility of spray forming aluminum Metal Matrix Composites (MMC) in the solid-state physical form as a light weight structural material. It is anticipated that this innovative manufacturing process will provide opportunities to fabricate near-net-shape spacecraft and interceptor structures with unique material properties. The process called S ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  7. CROSSED-FIELD WIGGLER

    SBC: MISSION RESEARCH CORP.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseMissile Defense Agency
  8. Ion-Implanted 2-D MESFET Technology for Wireless Communications

    SBC: Advanced Device Technologies,            Topic: N/A

    This Phase I project has two primary objectives. The first objective is to evaluate the feasibility of a fully ion implanted fabrication process based on the heterodimensional 2-D MESFET. The new device, the 2-D JFET, will have p+ ion implanted sidegates which laterally modulate a thin, highly doped n-type conducting channel. The 2-D JFET should have excellent high speed, low power characteristics ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. MULTI LEVEL SECURE IMAGE OPERATING SYSTEM

    SBC: ARIES Technology Corporation            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  10. Sensors-Adaptive Beam Expander

    SBC: LSA            Topic: N/A

    We propose to design and fabricate an adaptive beam expander that can be switched between two magnifications. Specifically, the beam expander provides diffraction-limited performance for laser radar beams with diameters of 1 mm and 3 mm. The adaptive beam expander is lightweight, and it has no moving parts. Because the beam expander is an afocal system, it operates on both outgoing and incoming be ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government