You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Disposable Micromachined Flow Immunoassay for Field Detection of Contaminants

    SBC: American Research Corporation of Virginia            Topic: N/A

    The use of enzyme-linked immunosorbent assay (ELISA) to detect contaminants such as solvents, fuels, and pesticides in soil and water samples is now well established. Although ELISA and related methods can facilitate analysis of samples, several washing and separation steps are involved that require 30 to 120 minutes per sample to reach equilibrium. Recently, near infrared fluorescence immunoassa ...

    SBIR Phase I 1997 Environmental Protection Agency
  2. A New Innovative Low Cost Manufacturing Process to Produce Titanium

    SBC: ATS-MER, LLC            Topic: N/A

    All titanium is produced by the Kroll process, which is a batch process for the magnesium (Mg) reduction of titanium tetrachloride (TiCl4). Separate operations are required to produce the toxic and very corrosive TiCl4, which must be stored and transported. Magnesium also is produced separately in liquid form via the electrolysis of magnesium chloride (MgCl2), which requires storage and transport ...

    SBIR Phase I 2008 Environmental Protection Agency
  3. Sensors for Metal Vapor and VOC Emissions

    SBC: Nanomaterials Research LLC            Topic: N/A

    Major improvements in process control, compliance monitoring, and objective environmental decisionmaking could be made if accurate, rugged, and affordable sensors were available. Of particular interest are environmental sensors that can continuously and quantitatively determine both toxic metal vapor emissions and organic compound emissions from complex matrix sources such as power plants, incine ...

    SBIR Phase I 1997 Environmental Protection Agency
  4. Hazardous Metal-Free Color Pigments

    SBC: Nanomaterials Research LLC            Topic: N/A

    Inorganic color pigments based on hazardous metals such as chromium, mercury, cobalt, lead, etc., account for more than 95% of the U.S. and worldwide pigments consumption. Color pigments are commonly used by numerous industries and in various consumer products. It is estimated that they are one of the largest vehicles of heavy metal-based chemicals in commerce. A technology that can provide a co ...

    SBIR Phase I 1997 Environmental Protection Agency
  5. Solvent Free Production of Performance Ceramics

    SBC: Nanomaterials Research LLC            Topic: N/A

    N/A

    SBIR Phase I 1996 Environmental Protection Agency
  6. Surface Functionalization of Packaging Fils to Promote Adhesion of Aqueous-Based Inks

    SBC: SIGMA TECHNOLOGIES INTERNATIONAL GROUP, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Environmental Protection Agency
  7. Silica Materials for Mercury Recovery From Wastewater

    SBC: TPL, INC            Topic: N/A

    A number of industrial processes generate wastewater with mercury contamination. Existing cleanup processes have difficulties in achieving low mercury discharge limits, especially in the presence of competing metal ions already below their discharge limits. Commercial ion exchange media are not selective for mercury, so other metal ions compete with mercury for binding sites. Consequently, excess ...

    SBIR Phase I 1997 Environmental Protection Agency
  8. A New Innovative Low Cost Manufacturing Process to Produce Titanium

    SBC: Environmental Abrasives, LLC            Topic: 07NCERA1

    All titanium is produced by the Kroll process, which is a batch process for the magnesium (Mg) reduction of titanium tetrachloride (TiCl4). Separate operations are required to produce the toxic and very corrosive TiCl4, which must be stored and transported. Magnesium also is produced separately in liquid form via the electrolysis of magnesium chloride (MgCl2), which requires storage and transport ...

    SBIR Phase I 2008 Environmental Protection Agency
  9. A Novel Approach for Safe and Rapid Decontamination of Buildings and Equipment and Nuetralization of Residues Using TERRACAP CB Decon System

    SBC: Rta Systems, Inc.            Topic: N/A

    Todays world and political climate lends itself to potential attacks by hostile forces and terrorists where both exterior and interior surfaces of vehicles, buildings, or equipment could become contaminated with biological warfare (BW) or chemical warfare (CW) agents. RTA Systems, Inc., proposes a system based on a two-part, water-based liquid solution that is spray-applied to contaminated surface ...

    SBIR Phase I 2008 Environmental Protection Agency
  10. A Safe and Rapid Method for Biological and Chemical Decontamination of Building and Equipment using the TERRACAP CB Decon System

    SBC: Rta Systems, Inc.            Topic: 07NCERN1

    Today’s world and political climate lends itself to potential attacks by hostile forces and terrorists where both exterior and interior surfaces of vehicles, buildings, or equipment could become contaminated with biological warfare (BW) or chemical warfare (CW) agents. RTA Systems, Inc., proposes a system based on a two-part, water-based liquid solution that is spray-applied to contaminated surf ...

    SBIR Phase I 2008 Environmental Protection Agency
US Flag An Official Website of the United States Government