Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Computed Tomography Algorithms for Helical Scanned Data

    SBC: ENSCO Inc            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseArmy
  2. A Cross Wind Sensor Using Optical Scintillation of a Laser Illuminated Target

    SBC: SCIENTIFIC TECHNOLOGIES CORP.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseArmy
  3. Economical and Reliable Adaptive Disturbance Cancellation for Lightly Damped Systems

    SBC: PLANNING SYSTEMS, INC.            Topic: N/A

    Efforts to apply active noise and vibration control commercially, while intensifying, continue to be hampered by the cost of the computers required to implement the active algorithms. Currently, the cost of wide-band control is prohibitive for lightly damped systems such as precision structures or highly reverberant acoustic spaces, even if the system has just one canceling actuator and one error ...

    SBIR Phase I 1997 Department of DefenseAir Force
  4. Post Exposure Bake Monitoring of Chemically Amplified Resists Using Scatterometry

    SBC: Sandia Systems, Inc.            Topic: N/A

    We will demonstrate the capability of scatterometry to provide a process monitor to post exposure bake of chemically amplified photoresist. Two or more scatterometers will be designed that are capable of monitoring the intensities of multiple diffraction orders that result from illuminating device patterns of photoresist. The goal is to demonstrate the capability of scatterometry to provide a PEB ...

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
  5. Automatic Feature Combined Track-Detect-Localize Technique

    SBC: DIGITAL SYSTEM RESOURCES, INC.            Topic: N/A

    A progressive system development is proposed which uses Bayesian methodology for combined detect, track, localize, and classify. The core paradigm focuses on detection followed by various estimation schemes to extract information on contact type, track, and location from the detector. A rapid prototype development using the Generic Multipurpose Processor (GMP) will provide optimal detection ...

    SBIR Phase I 1997 Department of DefenseNavy
  6. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. Non-invasive, Real-Time Measurement of Cognitive Workland for Adaptive Aiding of the Overburdened Decision-Maker

    SBC: Applied Innovation, Inc.            Topic: N/A

    This project will conceptually design and demonstrate the feasibility of a multivariate approach to the real-time measurement of cognitive workload, basedon operator psychophysiology as well as behavior, in the context of task demands. Such as approach will facilitate the development of cooperative human-computer controversy over how to implement such capabilities, including how to ascertain the ...

    SBIR Phase I 1997 Department of DefenseAir Force
  8. Advanced Six-Degree-of-Freedom (6-D) Laser Measurement System

    SBC: AUTOMATED PRECISION INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  9. HF Extension to Modern Network

    SBC: CENTER FOR REMOTE SENSING, INC.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
  10. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government