Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Economical and Reliable Adaptive Disturbance Cancellation for Lightly Damped Systems

    SBC: PLANNING SYSTEMS, INC.            Topic: N/A

    Efforts to apply active noise and vibration control commercially, while intensifying, continue to be hampered by the cost of the computers required to implement the active algorithms. Currently, the cost of wide-band control is prohibitive for lightly damped systems such as precision structures or highly reverberant acoustic spaces, even if the system has just one canceling actuator and one error ...

    SBIR Phase I 1997 Department of DefenseAir Force
  2. Non-invasive, Real-Time Measurement of Cognitive Workland for Adaptive Aiding of the Overburdened Decision-Maker

    SBC: Applied Innovation, Inc.            Topic: N/A

    This project will conceptually design and demonstrate the feasibility of a multivariate approach to the real-time measurement of cognitive workload, basedon operator psychophysiology as well as behavior, in the context of task demands. Such as approach will facilitate the development of cooperative human-computer controversy over how to implement such capabilities, including how to ascertain the ...

    SBIR Phase I 1997 Department of DefenseAir Force
  3. Flight Control Technology

    SBC: DIGITAL SYSTEM RESOURCES, INC.            Topic: N/A

    The Air Force has identified the need to develop affordable flight control technology to support Air Force Global Engagement objectives. Of particular interest to the Air Force is the development of real-time optimization algorithms for cooperative engagement solutions among Uninhabited Air Vehicles (UAV) in a multiple target environment. DSR proposes developing a real-time, rule based, Cooperat ...

    SBIR Phase I 1997 Department of DefenseAir Force
  4. Digital Model Reuse through Reconfigurable Pattern Translation

    SBC: GMA INDUSTRIES, INC.            Topic: N/A

    This project involves research and development of a means for reusing existing digital models and test vectors generated using the LASAR and HITS ATPG for digital test programs that are currently hosted on absolete and non-supported automatic test equipment. The approach identified herein promotes translation of LASAR and HITS ATPG into VXIbus-compatible instrument functions that are interoperabl ...

    SBIR Phase I 1997 Department of DefenseAir Force
  5. Nondestructive Ultrasonic Near-Surface Residual Stress Measurements in Aircraft Wheels

    SBC: Industrial Quality, Inc.            Topic: N/A

    An ultrasonic Rayleigh surface wave method is propose to determine residual stress depth profile in aluminum aircraft wheels. The Rayleigh wave method has several distinct advantages. The residual stress depth profile can be easily obtained by altering the penetration depth of the Rayleigh wave. The Rayleigh wave is bound to the surface of the wheel, enabling measurements on curved and ...

    SBIR Phase I 1996 Department of DefenseAir Force
  6. Nondestructive Characterization of Temperature Dependent Tension in Track Rail

    SBC: Industrial Quality, Inc.            Topic: N/A

    An ultrasonic method is proposed to determine the level of pre-tension in rails of the high speed test-track. The specific ultrasonic approach has the benefits of being able to perform measurements without the need to account for the texture in the sample and can be used on structures with irregular geometries. The ultrasonic technique can also be used to establish the temperature dependent chan ...

    SBIR Phase I 1997 Department of DefenseAir Force
  7. Electronic, Digital X-Radiologic Imaging Systems for Field Inspections

    SBC: Industrial Quality, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseAir Force
  8. A Job Performance Measurement System

    SBC: Research Development Corporation            Topic: N/A

    As organizations move toward increased performance measurement and accountability, there is an increasing need to measure job performance at the individual worker level. Traditional assessment tools have been criticized as measuring test taking skills more than job performance skills. A number of approaches have been developed to address this weakness by measuring performance in practical proble ...

    SBIR Phase I 1997 Department of DefenseAir Force
  9. A Gallium Arsenide Synchronous Rectified-based Low Voltage Power Converter for High Radiation Environments

    SBC: Virginia Power Technologies            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseAir Force
  10. An Advanced Sensor For Field Characterization of Operational Laser Systems

    SBC: WAVEFRONT SCIENCES, INC.            Topic: N/A

    To field characterize laser systems the laser power, beam divergence, intensity profile and spot size of the laser must be measured with a robust, vibration insensitive system. While some of these parameters can be obtained using conventional components, beam divergence is difficult to measure because of the complexity and vibration sensitivity of typical interferometry based elements. We propos ...

    SBIR Phase I 1997 Department of DefenseAir Force
US Flag An Official Website of the United States Government