You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of a Compact Electron Beam Accelerator

    SBC: MICROWAVE TECHNOLGIES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  2. Embedded Sensors via Laser Engineered Net Shaping

    SBC: OPTOMEC, INC.            Topic: N/A

    Optomec Design Company proposes to use Laser Engineered Net Shaping (LENSTM), a Rapid Prototyping and Manufacturing (RP&M) technology currently under development at Sandia National Laboratories (SNL), as a new method for integrating instrumentation (e.g., embedded sensors) into metal structural components. SNL has demonstrated the ability of the LENSTM technology to produce near net shape stainles ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  3. Ultrahigh Quality, Single-Crystal Bulk Silicon Carbide

    SBC: INTRINSIC SEMICONDUCTOR CORP.            Topic: N/A

    Silicon carbide materials will revolutionize semiconductor devices for military and commercial markets. The material's wide bandgap, high electric field breakdown, high thermal conductivity give SiC capabilities that far exceed those of silicon or gallium arsenide. Despite significant progress in silicon carbide development, fundamental defects--most prominently micropipes--persist. If SiC is to s ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  4. Optimal SiC Source Powder for Bulk SiC Growth

    SBC: INTRINSIC SEMICONDUCTOR CORP.            Topic: N/A

    The properties of single-crystal silicon carbide are such that electronics devices from this material have demonstrated remarkable performance characteristics. Despite the material's promise, the material has not yet found acceptance in mainstream device markets because of the material's high cost, among other reasons. This Phase I SBIR proposes an SiC source powder with unique properties which wi ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  5. Novel Technology for Electronic Multilayer Devices

    SBC: Sumi Tech, Inc.            Topic: N/A

    A novel technological approach was recently devised by Sumi Tech engineers to fabricate multilayer electronic components, which enables the manufacture of devices with very high volumetric efficiency and reliability. Inexpensive electrode materials such as copper, or aluminum are potential candidates, since the process takes place at relatively low ambient temperature (e.g., less than 400 C), thus ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  6. Fiber Reinforced Lightweight Silicon Carbide Mirrors And Telescope

    SBC: Ceramic Composites, Inc.            Topic: N/A

    CCI WILL INVESTIGATE NOVEL CHEMICAL VAPOR INFILTRATION (CVI) PROCESSING TECHNIQUES TO DEMONSTRATE A COMPOSITE MATERIAL CERAMIC (CMC) FABRICATION PROCESS FOR SILICON CARBIDE (SIC) MIRRORS AND OPTICAL COMPONENTS. THE PROPOSED METHOD WILL COMBINE THE CVI OF A REINFORCED FIBROUS CVD/SIC WITH THE REPLICATION PROCESS OF BULK CVD/SiC MIRROR FACESHEET AND A PREFORM LIGHTWEIGHT STRUCTURE OF CVI REINFORCED ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  7. Optimization of Cryogenic Power Switching Devices

    SBC: Hmj Corp.            Topic: N/A

    The innovative approach of operating power electronics in a crvogenic environment depends criticallv on the availabilitx of controllable semiconductor switches capable of high efficiency operation in the temperature range from about 20 K to 150 K. Thc motivation for developing this type of pouer electronics is to realize highly efficient and compact svstems with significantl! improved power/mass r ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  8. Solid-State Spray Forming of Near-Net-Shape Structural Materials

    SBC: INNOVATIVE TECHNOLOGY INC            Topic: N/A

    The objective of this research is to demonstrate the feasibility of spray forming aluminum Metal Matrix Composites (MMC) in the solid-state physical form as a light weight structural material. It is anticipated that this innovative manufacturing process will provide opportunities to fabricate near-net-shape spacecraft and interceptor structures with unique material properties. The process called S ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. CROSSED-FIELD WIGGLER

    SBC: MISSION RESEARCH CORP.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseMissile Defense Agency
  10. High Performance Fault Tolerant Missile Control System

    SBC: Intelligent Automation, Inc.            Topic: N/A

    Future missiles will be required to handle many diverse missions. These missions will require increased speed, precision, and survivability under a wider variety of flight conditions than current missiles. Therefore the role of modern flight control systems (FCS) must be expanded well beyond the traditional functions of augmenting stability and controllability with very limited control authority. ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government