You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Preimidized Powder Towpregs for Low Cost, High Performance Missile Cases
SBC: Adherent Technologies, Inc. Topic: MDA07022The Missile Defense Agency (MDA) is soliciting proposals for new missile materials to expand the capability of current air-to-ground missile systems. This expansion of capability dictates the development of lighter weight materials that are capable of short duration exposures to temperatures as high as 800°F. A novel approach to filament winding using high-temperature matrix materials is propos ...
SBIR Phase I 2008 Department of DefenseMissile Defense Agency -
Development of a Compact Electron Beam Accelerator
SBC: MICROWAVE TECHNOLGIES, INC. Topic: N/AN/A
SBIR Phase I 1997 Department of DefenseMissile Defense Agency -
Multifunctional Metal Rubber™ Composite Structural Materials
SBC: NANOSONIC INC. Topic: MDA07011This SBIR program would develop multifunctional structural composite materials based on NanoSonic’s Metal Rubber™. The Metal Rubber™ composites would offer mechanical stiffness-to-weight comparable with conventional cross-ply laminate face sheet and structural composite materials, but also incorporate high electrical conductivity, broadband RF/EMI shielding, and uniform thermal conductivity ...
SBIR Phase I 2008 Department of DefenseMissile Defense Agency -
Embedded Sensors via Laser Engineered Net Shaping
SBC: OPTOMEC, INC. Topic: N/AOptomec Design Company proposes to use Laser Engineered Net Shaping (LENSTM), a Rapid Prototyping and Manufacturing (RP&M) technology currently under development at Sandia National Laboratories (SNL), as a new method for integrating instrumentation (e.g., embedded sensors) into metal structural components. SNL has demonstrated the ability of the LENSTM technology to produce near net shape stainles ...
SBIR Phase I 1997 Department of DefenseMissile Defense Agency -
Ultrahigh Quality, Single-Crystal Bulk Silicon Carbide
SBC: INTRINSIC SEMICONDUCTOR CORP. Topic: N/ASilicon carbide materials will revolutionize semiconductor devices for military and commercial markets. The material's wide bandgap, high electric field breakdown, high thermal conductivity give SiC capabilities that far exceed those of silicon or gallium arsenide. Despite significant progress in silicon carbide development, fundamental defects--most prominently micropipes--persist. If SiC is to s ...
SBIR Phase I 1997 Department of DefenseMissile Defense Agency -
Optimal SiC Source Powder for Bulk SiC Growth
SBC: INTRINSIC SEMICONDUCTOR CORP. Topic: N/AThe properties of single-crystal silicon carbide are such that electronics devices from this material have demonstrated remarkable performance characteristics. Despite the material's promise, the material has not yet found acceptance in mainstream device markets because of the material's high cost, among other reasons. This Phase I SBIR proposes an SiC source powder with unique properties which wi ...
SBIR Phase I 1997 Department of DefenseMissile Defense Agency -
Enhancing HTK Lethality Modeling Tools
SBC: TESLA LABORATORIES, INC. Topic: MDA07020Existing Core simulation models used for defense development and evaluation fail to accurately model lethality for many standoff engagement options such as the use of multiple projectiles and thus cannot validly drive new defense technology development. This program will develop new physics-based computer models for incorporation into existing Core Lethality Models to increase simulation function ...
SBIR Phase I 2008 Department of DefenseMissile Defense Agency -
Near Net Shape Manufacturing of Actuator Components by Rapid Combustion Driven Powder Consolidation Technology
SBC: UTRON, Inc. Topic: MDA07024In response to MDA's need for fabricating actuator components for DACS and other systems, UTRON proposes an innovative manufacturing technology called the high pressure Combustion Driven Powder Compaction (CDC) to manufacture near net shape quality actuator system components such as gears with improved densification, mechanical and microstructural attributes. The actuator gear system components ar ...
SBIR Phase I 2008 Department of DefenseMissile Defense Agency -
Solid Freeform Fabrication of Anti-Tamper Containers
SBC: LUNA INNOVATIONS INCORPORATED Topic: MDA07043Defense Department entities with a mission need to transport critical technology material have a number of tamper indicating solutions, but few tamper protection solutions available to them. Those few protection solutions are not cost effective, nor are they as versatile as one might desire. The Missile Defense Agency in particular has a need to afford maximum protection of U.S. technologies in ...
SBIR Phase I 2008 Department of DefenseMissile Defense Agency -
A Sentient Watchdog Instrument for MDA Systems
SBC: MANAGEMENT SCIENCES INC Topic: MDA07040MSI manufactures multi-processor instrumentation modules. Our latest product is the Embeddable Programmable Instrumentation Circuit (EPIC). The army has funded the EPIC for embedded diagnostics, prognostics and intelligent control of electrical systems in combat vehicles. A new Phase II NAVAIR contract funds transition to a radiation-hard ASIC chip installed in either connectors or LRU. The EPIC ...
SBIR Phase I 2008 Department of DefenseMissile Defense Agency